PiranhaTools 19 views   2 clicks ♡

Double ended twist drill for boring iron, steel, brass, zinc, copper, aluminium and plastic sheets.Made in Germany.

High quality drill countersink with rotating depth stop made of steel. Adjustable pre-drill adjustable. Countersink angle 60deg.This countersink is an ideal tool for pre-drilling on deck boards.Made in Germany.

Self centring hinge boring bit for power drill. Equipped with a guide bush containing a spring and core drill HSS. The guide bush is inserted in the screw hole of a fitting or a hinge. The guide bush will centre itself in the screw hole of the fitting or the hinge.Made in Germany.

Depth stop set supported by ball bearing to suit Famag-Forstner bits from 10 to 48mm Diameter with exchangeable guide bushings.For larger depths, it is possible to mount the guide bushing in reverse way.Set in wooden box includes:- Depth Stop with bearing- Circlip plier- Guide bush 8mm- Guide bush 1...

Premium auger bit with special ground bevelled tip and stable spirals. For boring into all softwoods.Entry and exit of the borer is considerably cleaner in comparison with a standard auger bit.Made in Germany.

The pilot guided Bormax is ideal for drilling on angle. Can be used with the centre point as the traditional Bormax.The set is delivered in a wooden box with 15, 20, 25, 30 and 35mm Bormax Bits, 2 x pre drill bits 4mm and a hexagonal key to remove the brad point and fit the 4mm drill bit.Premium for...

Premium Disc Plug Cutters for the production of plugs for filling knot holes or fixing damage in wood.Set of 5 Plug Cutters with the following sizes:15,20,25,30 and 35mmMade in Germany.

For the extension of the Bormax Forstner Bits with 10mm shanks.Int. diameter 10mmMade in Germany

For the extension of the Bormax Forstner Bits with 10mm shanks.Int. diameter 8mmMade in Germany

Set in wooden case with 3 x extensions in 80, 125 and 250mm long to extend the Bormax Forstner Bits with 10mm shanks.Made in Germany

Set in wooden case with 3 x extensions in 80, 125 and 250mm long to extend the Bormax Forstner Bits with 8mm shanks.Made in Germany

The pilot drill bit is ideal for drilling at an angle which is not 90 deg. Can be used with the centre point as the traditional Bormax. The tool is delivered with a brad point, pre drill bit 4mm and a hexagonal key.Premium forstner bits for rapid drilling in softwood, hardwood, chipboard, MDF,. Spec...

To fit on FAMAG auger bits with Ø 13 mm shank. Drilling and counterboring in one single operation. Recommended for softwood.With lateral attachment screw for being fixed on the shanks of FAMAG auger bits Auger bit in the picture is not included.Made in Germany.

Premium "Lewis" pattern auger bit for drilling deep holes in soft wood and European hard wood with power drill and joinery machines. Due to the precise production of the auger bits, they can also be used for drilling exact holes for stud bolts.Made in Germany.

Premium "Lewis" pattern auger bit for drilling deep holes in soft wood and European hard wood with power drill and joinery machines. Due to the precise production of the auger bits, they can also be used for drilling exact holes for stud bolts.Made in Germany.

Premium "Lewis" pattern auger bit for drilling deep holes in soft wood (depending on the diameter) and also limited in European hard wood with lug for wooden handle. Due to the precise production of the auger bits, they can also be used for drilling exact holes for stud bolts.Wooden handle not inclu...

Fixture set consisting in four clamping elements to suit ant of the Delta drill guides from Famag.

2 x expansion bars to fit the fixture set with a range up to 200mm.

The PAROLI® "PUMPSHANK®" ejector-shaft is fitted with a solid hexagonal holder to be held properly in the drill chuck. On the other side is mounted a very special conical thread. But what for? This precision thread is designed to release an adapter with the same internal thread with less than one...

The PAROLI® "PUMPSHANK®" ejector-shaft is fitted with a solid hexagonal holder to be held properly in the drill chuck. On the other side is mounted a very special conical thread. But what for? This precision thread is designed to release an adapter with the same internal thread with less than one...

The carbide tipped hole saw PAROLI® all-round: There are different possibilities to produce a hole saw. Usually you bend a piece of metal so that it receives a round geometry and weld the beginning to the end. Now a lid with a shank is welded on and the hole saw is finished! The question is, if the...

In case you buy the ejector shaft PUMPSHANK ® separately it might be reasonable to have a quantity of adaptors. These adaptors can be mounted on the different hole saws. So you avoid with each change of the hole saw to change the adaptor as well.Sold individually.

Bi-metal hole saw with HSS-Co teeth, variable tooth pitch, weld on a cylindrical tool head of steel. Fast and easy remove of the saw core by using the PUMPSHANK® ejector. Round sawing in steel and nonferrous metal as copper, bronze and aluminium with power drill. Due to the high quality cobalt allo...