Plp 90 views Claim this Business♡

Link MXG Strada 7" dash, powered by AIM.The Link MXG Strada Race Edition is a full colour, 7-inch dash display with 10 RGB shift lights and eight customisable alarm LED lights. The dash is pre-configured to work with all Link G4 /G4X Wire-In and Plugin ECU's. See features tab for more information.Th...

Link MXG Strada 5" dash, powered by AIM.The Link MXG Strada Street edition is a full colour, 5-inch dash display legal for road use featuring 10 RGB shift lights and street icons down the side of the dash. It is pre-configured to work with all Link G4 /G4X Wire-In and Plug-in ECU's. See features tab...

Link MXG Strada 7" dash, powered by AIM.The Link MXG Strada Street edition is a full colour, 7-inch dash display legal for road use featuring 10 RGB shift lights and street icons down the side of the dash. It is pre-configured to work with all Link G4 /G4X Wire-In and Plug-in ECU's. See features tab...

Looking to run flex-fuel? Then the Ethanol Content Sensor is a must have. The Ethanol Content Sensor measures the ratio of ethanol to petrol in a flex fuel vehicle. This sensor also measures fuel temperature. Compatible with all current Link Wire-In and Plug-In ECU’s. Uses 1 Digital input on the E...

Donut style 8mm Knock Sensor prewired with loom, flying leads. Suitable to wire directly to Link ECU or use with the G4 Knocklink Visual Warning Light.

Includes 2-pin Deutsch DTM connector kitAluminium and steel weld in mounting bosses available1/8" BSP Thread

Extreme Duty Fast Response EGT Temperature ProbeType K thermocouple probeExposed sensing junction for fastest responseIncludes 316 SS adjustable compression fittingStainless steel protected wiresDesigned for extreme engine test & racing environmentsWhen using this with an ECU other than the Thunder...

5 m long 'A' loom to suit G4, G4 and G4X ECUsPerfect for all custom wiring jobs utilising Link WireIn ECUs. The ‘A’ Loom has a Link ‘A’ ECU connector at one end and unterminated wires at the other. All wires are colour coded to match the manual. This loom is also available in 0.4m and 2.5m l...

0.4m long 'A' loom to suit G4, G4 and G4X Wire-In ECUsPerfect for all custom wiring jobs utilising Link WireIn ECUs. The ‘A’ Loom has a Link ‘A’ ECU connector at one end and unterminated wires at the other. All wires are colour coded to match the manual. This loom is also available in 2.5m a...

SKU 237-4000 - Honda Civic Easy to install. Affordable. Reliable.G4X PlugIn ECUs offer the latest in engine management technology, designed to easily maximize the potential from your car.This ECU fits inside the factory OEM enclosure. Installation is a breeze, with no alteration of the factory wirin...

S2000LINK - S2000XSKU 233-4000 DESIGNED FOR THE HONDA S2000 AP1. PLEASE CHECK YOUR CONNECTOR MATCHES THE HEADER IN THE LISTED PHOTO BEFORE PURCHASING.THIS ECU WORKS FOR MANUAL TRANSMISSIONS ONLY.THIS ECU DOESN'T SUPPORT FACTORY E-THROTTLE MODELSMOST FACTORY FEATURES ARE SUPPORTED.CHECK THE FEATURES...

Easy to install. Affordable. Reliable.G4X PlugIn ECUs offer the latest in engine management technology, designed to easily maximize the potential from your car.This ECU fits inside the factory OEM enclosure. Installation is a breeze, with no alteration of the factory wiring loom required for the mod...

MX5 LINK ECU - MX5NB2XLINK ECU MAZDA MX5Easy to install. Affordable. Reliable.G4X PlugIn ECUs offer the latest in engine management technology, designed to easily maximize the potential from your car.This ECU fits inside the factory OEM enclosure. Installation is a breeze, with no alteration of the...

MX5Link LINK - MX5NB1XMX5 Mazda Link ECUEasy to install. Affordable. Reliable.G4X PlugIn ECUs offer the latest in engine management technology, designed to easily maximize the potential from your car.This ECU fits inside the factory OEM enclosure. Installation is a breeze, with no alteration of the...

Version 11Easy to install. Affordable. Reliable.G4X PlugIn ECUs offer the latest in engine management technology, designed to easily maximize the potential from your car.This ECU fits inside the factory OEM enclosure. Installation is a breeze, with no alteration of the factory wiring loom required f...

Designed for the K20A engine.·Please check your connector matches the header in the listed photo before purchasing.Suitable Applications (Manual Transmission only):Honda Integra Type R DC5 2002-2004 with K20A/K20A2/K20A3Acura RSX 2002-2004 with K20A/K20A2/K20A3Honda Civic Type R EP3 2001-2005 with...

Donut style8mm holeIncludes plug and pin kit

5 m long 'B' loom to suit G4, G4 and G4X ECUsPerfect for all custom wiring jobs utilising Link WireIn ECUs. The ‘B’ Loom has a Link ‘B’ ECU connector at one end and unterminated wires at the other. All wires are colour coded to match the manual. This loom is also available in 0.4m and 2.5m l...

0.4m long 'B' loom to suit G4, G4 and G4X Wire-In ECUsPerfect for all custom wiring jobs utilising Link WireIn ECUs. The ‘B’ Loom has a Link ‘B’ ECU connector at one end and unterminated wires at the other. All wires are colour coded to match the manual. This loom is also available in 2.5m a...

Easy to install. Affordable. Reliable.G4X PlugIn ECUs offer the latest in engine management technology, designed to easily maximize the potential from your car.This ECU fits inside the factory OEM enclosure. Installation is a breeze, with no alteration of the factory wiring loom required for the mod...

Easy to install. Affordable. Reliable.G4X PlugIn ECUs offer the latest in engine management technology, designed to easily maximize the potential from your car.This ECU fits inside the factory OEM enclosure. Installation is a breeze, with no alteration of the factory wiring loom required for the mod...

Easy to install. Affordable. Reliable.G4X PlugIn ECUs offer the latest in engine management technology, designed to easily maximize the potential from your car.This ECU fits inside the factory OEM enclosure. Installation is a breeze, with no alteration of the factory wiring loom required for the mod...

Weld in steel boss, 1/8" NPT Thread. Suitable for mounting Intake air temperature (IAT1-8), Coolant Temperature sensors (NTC1-8) and other sensors that use 1/8" NPT Thread.

Weld in Aluminium boss, 1/8" NPT Thread. Suitable for mounting Intake air temperature (IAT1-8), Coolant Temperature sensors (NTC1-8) and other sensors that use 1/8" NPT Thread.