Pro Class Custom Parts 21 views Claim this Business♡

Features & Benefits:-117ci to 132ci Big Bore Kit (4.320″ Bore)Fits Oil Cooled Models.NOTE: Will not fit FLH’24up, They use Water Cooled Cam Plate & Oil PumpChain Drive Cam & Forged Pistons with 11.1 Compression RatioWrinkle Black with Highlighted Cylinder Fins.Bolt-On Kit — No Case Machining R...

Features & Benefits:-117ci to 132ci Big Bore Kit (4.320″ Bore)Fits Oil Cooled Models.NOTE: Will not fit FLH’24up, They use Water Cooled Cam Plate & Oil PumpChain Drive Cam & Forged Pistons with 11.1 Compression RatioWrinkle Black with Highlighted Cylinder Fins.Bolt-On Kit — No Case Machining R...

Features & Benefits:-117ci to 132ci Big Bore Kit (4.320″ Bore)Fits Oil Cooled Models.Oil Pump/Cam Plate:-NOTE: Will NOT fit SOFTAILChain Drive Cam & Forged Pistons with 11.1 Compression RatioWrinkle Black with Highlighted Cylinder Fins.Bolt-On Kit — No Case Machining Required.Includes Oil Pump &...

Features & Benefits:-Set of 4 for One Complete Engine.Kits Includes Upper (OEM # 17948-99) & Lower Tubes (OEM # 17939-99) , Clips (OEM # 17968-99), Cups (OEM # 17945-36), Springs (OEM # 17947-36) & Washers.Proudly Made in the USA by Colony Machine

Bolt-in big power for your Gen 2 M8 with the S&S Cycle HPT542 cam. It starts with that idle M8 owners want, the sound of something ready to perform and when you open the throttle you feel it. A mile-wide torque band and high rpm horsepower, the HPT542 is what Gen 2 owners have been asking for. With...

Upgrade your ride with our precision machined sprockets, designed for accurate cam timing and smoother chain engagement. Forged from high-quality bearing steel, they deliver exceptional tooth wear resistance and extended life under high loads. Experience premium performance and direct replacement co...

Upgrade your ride with our precision machined sprockets, designed for accurate cam timing and smoother chain engagement. Forged from high-quality bearing steel, they deliver exceptional tooth wear resistance and extended life under high loads. Experience premium performance and direct replacement co...

Features & Benefits:-Buy all of the matched parts in one kit & save $’s. Cam Chest Kit Includes:Oil Pump/Cam Plate:-NOTE: Will not fit FLH’24up, They use Water Cooled Cam Plate & Oil PumpPrecision Machined from Billet AluminumPassage Plugs Removeable for servicingIndependant Scavenge Sections fo...

Features & Benefits:-Buy all of the matched parts in one kit & save $’s. Cam Chest Kit Includes:Oil Pump/Cam Plate:-NOTE: Will not fit FLH’24up, They use Water Cooled Cam Plate & Oil PumpPrecision Machined from Billet AluminumPassage Plugs Removeable for servicingIndependant Scavenge Sections fo...

Features & Benefits:-Buy all of the matched parts in one kit & save $’s. Cam Chest Kit Includes:Oil Pump/Cam Plate:-NOTE: Will NOT fit SOFTAILPrecision Machined from Billet AluminumPassage Plugs Removeable for servicingIndependant Scavenge Sections for Flywheel Cavity and Cam ChestDebris Screens i...

Features & Benefits:-Buy all of the matched parts in one kit & save $’s. Cam Chest Kit Includes:Oil Pump/Cam Plate:-NOTE: Will NOT fit SOFTAILPrecision Machined from Billet AluminumPassage Plugs Removeable for servicingIndependant Scavenge Sections for Flywheel Cavity and Cam ChestDebris Screens i...

Features & Benefits:-Left Hand Crank Case Bearing.Replaces OEM # 9029

Features & Benefits:-117ci to 132ci Big Bore Kit (4.320″ Bore)Fits Oil Cooled Models.Oil Pump/Cam Plate:-NOTE: Will NOT fit SOFTAILChain Drive Cam & Forged Pistons with 11.1 Compression RatioWrinkle Black with Highlighted Cylinder Fins.Bolt-On Kit — No Case Machining Required.Includes Oil Pump &...

Note: Maximum Recommended Lift =.580″Beehive steel valve spring kitUltra pure chrome silicon Nickle spring wireExtra processing for fatigue resistance4140 Chromoly steel RetainersTriple Groove Valve LocksUpgrade on OEM # 18052-01K, 18055-01K, 18057-01K & 18662-01KSuggested Additional Purchase:Vito...

This is a comprehensive cam installation kit. The kit includes Feuling HP Lifters, S&S Billet Lifter Cuffs, Cam Change Gasket Kit & Adjustable Pushrods with Black Covers

This is a comprehensive cam installation kit. The kit includes Feuling HP Lifters, S&S Billet Lifter Cuffs, Cam Change Gasket Kit & Adjustable Pushrods that Re-use the Stock Pushrod Covers

This is a comprehensive cam installation kit. The kit includes S&S 55mm Alloy Manifold, 6.2g/s Injectors, Feuling HP Lifters, S&S Billet Lifter Cuffs, Cam Change Gasket Kit & Adjustable Pushrods that Re-use the Stock Pushrod Covers

This is a comprehensive cam installation kit. The kit includes S&S 55mm Alloy Manifold, 6.2g/s Injectors, Feuling HP Lifters, S&S Billet Lifter Cuffs, Cam Change Gasket Kit & Adjustable Pushrods with Black Covers

Features & Benefits:-Fits Both Stock Twin Cam 96ci & 103ci bolt patterns.Engines are fully assembled up to the intake port face, therefore the customer will need to purchase a stock length manifold, throttle body and air cleaner to complete the installation of the hard parts.4-1/8″ Bore.4-5/8″ S...

Conrod Bearing Set for all of S&S three-piece flywheelsFits V111 & V124 1984-99Fits S&S 3 Piece Flywheel 1999-06Fits S&S 3 Piece Flywheel 2007-17Will Not Fit HD Flywheels

The New Z-Factor M8 Cam by Red Shift Cams® was developed by Zipper’s Engineering Team, in conjunction with the dyno experts from Fuel Moto, to complement Fuel Moto’s Mufflers and performance parts.The Z Factor RS-590 “ZZ Chop" camshaft is our latest high output cam offering a combination of h...

Features & Benefits:-Replaces OEM # 24385-40

CNC machined from billet aluminum for strength and reduced weightPrecision-machined for a clean, high-end finishDesigned to match other Trask billet performance componentsInstalls using factory mounting points with no modification requiredProudly made in the USA by Trask Performance

Billet 6061 Aluminum Lifter Block Cover set – BlackIncludes front and rear billet lifter covers, gaskets and stainless ARP hardwareFeutures relief cuts for easier adjustable pushrod installationMADE IN U.S.A.