Pro Class Custom Parts 21 views Claim this Business♡

Features & Benefits:-Fit all Big Twins with Shovel Engines using JIMS Powerglide Tappets #’s JM-2459-1, JM-2460-1 or JM-2461-1.Upgrade to the latest design improvements.Kit comes with four new 3/8″ diameter pushrod seats, to make thePowerglide 5/8″ shorter and four new Pro-Lite.Worksavers Shov...

Features & Benefits:-Precesion machined tappets complete with premium hydraulic unitsProudly made in the USA by S&S Cycle

Features & Benefits:-These Stock Pushrod Covers are Beautifully Chrome Plated Duplicates of the Harley Part.Set of 4 with Rubber Seals.Sold as a Kit.Proudly Made in the USA by Colony Machine !MFR PART No: 2091-12ROLLIES PART No: CM-2091-12

Features & Benefits:-Gloss Black Finish.Kit Includes Front & Rear Lifter Covers, Gaskets & ScrewsIf you want upgraded Titanium 12-Point bolts purchase # AN-300-936Sold as a Pair.Replaces OEM # 25700653Tech Tips:-Check the fit of lower pushrod cover into Tappet cover prior to assembly onto the vehicl...

Features & Benefits:-These specially design pushrods work with the stock pushrod covers.Save time & money on a cam change, cut those stock pushrods, these can be installed & removed without disassembling rocker boxes.Super strong Chrome-Moly steel reduces pushrod flex.Tech Tips:-Prior to Start-up, t...

Features & Benefits:-Sold as a set of 4.Tech Tip:-Does not work with the stock HD Push Rod CoversPrior to Start-up, the engine should be wound over with spark plugs removed until oil reaches the top pushrod ball / rocker arm socket.Proudly Made in the USA by S&S Cycle

New revolutionary design with 0.115″ of total travel vs. a full travel lifter with 0.200″. These hydraulic lifters will increase camshaflt lift and RPM by decreasing valve float and valve-train harmonics while maintaining a quiet engine. The travel reduction reduces the amount of pushrod plunge...

Features & Benefits:-Race Series hydraulic roller liftersMade from cold headed 1018 steel with a heat treated hardened surfaceInner piston clearance and outer diameter held to aerospace tolerancesDesigned to exceed the needs of large lift camshafts and higher spring pressures, while maintaining prop...

OEM ReplacementWorks with Rollies Timesaver adjustable pushrods # SS930-0162Aerospace Grade / Mil Spec manufacturingVacuum Bagged & Autoclave Cured for structural integrityPre-Preg 3K Full Twill Carbon Fiber Construction

Features & Benefits:-Kit Includes Pushrod Outer Covers & Upper Clips.Sold as a Kit.Tech Tip:-Use when Installing Adjustable Pushrods.Requires the use of OEM type Inners, Springs, Retainers & Wasers.Proudly Made in the USA by Colony Machine

Features & Benefits:-Set of 4 for One Complete Engine.Kits Includes Upper & Lower Tubes, Clips, Cups, Springs & Washers.O-ring kit sold separately # JGI-11133-V2Replaces OEM # 17938-83A

Features & Benefits:-Performance hydraulic roller lifters – Set of 4Optimized oil flow to top end – valves, springs, rockers, shafts & valve guides, Extends life of top end valve gearDyno developed and track tested, Cooler oil and reduced wearCNC machined and precision groundReplaces OEM # 18538...

Features & Benefits:-Sold As a set of 4.Replaces OEM # 17920-53A

Features & Benefits:-Chrome-Moly Steel Pushrods.Replaces OEM # 17897-89 & 17904-89Tech Tip:-XL’91-03 models must buy CM-2255-36 and CM-2254-2.XL’04up models must buy CM-2253-36.On 1991up models, it is necessary to disassemble the rocker arm/rocker box to remove the stock one piece pushrod cover...

Features & Benefits:-Feuling Oversized 0.0010″ Race Series Lifters.Oversized Diameter. (0.843 – 0.8435) Race Series full travel hydraulic lifters are machined from a steel body and designed to exceed the needs of large lift camshafts and higher valve spring pressures with a slower bleed down rat...

Features & Benefits:-Kit Includes Front & Rear Lifter Covers, Gaskets & Screws.If you want upgraded Titanium 12-Point bolts purchase # AN-300-935Sold as a Pair.Replaces OEM #’s 17964-99, 17966-99, 17576-99 & 17577-99Tech Tips:-Check the fit of lower pushrod cover into Tappet cover prior to assembl...

Features & Benefits:-Fits Evolution EnginesMade in JapanSold as a PairBlack FinishKit includes:Lifter block Front & Rear8 x 1/4″-20 ScrewsSuggested Additional Purchase:Lifter Block Gaskets # JGI-18633-48-KFReplaces OEM # 18540-83Replaces OEM # 18542-83Replaces OEM # 18622-85Replaces OEM # 18623-85...

Features & Benefits:-Run in cast iron or aluminum tappet blocksProduced from billet bearing steelA true center-line for roller life and exact cam timingState of the art pushrod seat, machined with the same segmented parabolic cup as the JIMS roller rockersIncludes State of the art hydraulic unit.Tec...

Features & Benefits:-Feuling Oversized 0.0015″ Race Series Lifters.Oversized Diameter. (0.8435 – 0.844) Race Series full travel hydraulic lifters are machined from a steel body and designed to exceed the needs of large lift camshafts and higher valve spring pressures with a slower bleed down rat...

Features & Benefits:-Chrome-Moly Pushrods.Eliminates the need to disassemble the top end & remove the rocker arms to change pushrods or camshafts.Larger in diameter than the original equipment so it is much stronger to eliminate valve train “flex".Replaces OEM # 17921-83, 17924-83, 17927-83, 17930...

Features & Benefits:-Kit includes 4 pushrods & 4 chrome tubes.Twin Cam Quick Install Adjustable pushrods plus Tube Kit, 3/8″ OD tube, 0.134 wall thickness, set of 4 pushrods.Individual length Exhaust and Intake pushrods, Install Without the removal of rocker covers.This is the strongest Quick inst...

Made from 7075-T651 aluminumPrecision machined with helical-style grooves for better lubricationSold eachReplaces OEM # 18607-57Tech Tips:-4 Required per Bike.Made in the U.S.A.

Features & Benefits:-Sold Each.Replaces OEM # 17920-53AProudly Made in the USA by S&S Cycle

Features & Benefits:-0.165″ Wall thickness,One piece (non-adjustable)Eliminates pushrod flexReduces valve-train harmonics and allows increased valve liftFixed Length 4130 Chrome moly one piece pushrods with swedged formed ends.Heavy duty 7/16″ diameter tube with 0.165 wall thickness, precision c...