944 Ultra Low Series with Quik Preload System, 12.5in. Standard Spring Rate Rear Shock Absorbers - Black. Fits Touring 1980up - Progressive Suspension

With QPS, it’s no longer necessary to take saddlebags off to adjust the sag when going from a single rider, to a two up riding configuration, and then back to a solo riding experience. This means the suspension can be set up for changes in weight load in less than a minute

By combining a flat-wire spring with a progressive main spring, this 12.5″ shock has the ride height of an 11″ shock under the weight of the bike yet utilizes the full stroke of a 12.5″ shock as terrain demands it.

Sits 2″ lower than a stock HD Touring model & provides the best ride a short shock can.

Frequency Sensing Technology (FST) allows the shocks to sense the

frequency of a bump and automatically adjust damping for superior ride quality.

Sealed gear driven preload adjuster with 17mm of adjustment

Adjust spring preload in seconds without removing saddlebags

30 complete turns of preload fine adjustment

Hand-built, tuned & dyno’ d in Progressives facility.

Tech Tips:-

Standard Spring Rates are recommended for riders that weigh under 110kg.

Heavy Duty Spring Rates are recommended for riders that weigh over 110kg, or for riders who ride 2 up over 50% of the time.

If you are purchasing longer or shorter suspension, confirm that changing your Suspension travel will not cause clearance issues.

Performance Suspension Upgrades provide better handling through a Stiffer more controlled Ride.

Proudly Made by Progressive Suspension