QTech 1 views   1 clicks Claim this Business♡

QTech Workbench is our USB based configuration utility.QTech Workbench is used for configuring multiple products including:- DATRAN XL4 Plus RTU- QDR Digital Radio- Multi Point Controller- SMS Lite (rev D with firmware >4.10)to download the latest QTech Workbench.to download the QTech Workbench U...

$1,330.00The Multi Point Controller (MPC) allows you to create a wireless network of up to eight slave modules over a range of several km. This powerful solution has a sophisticated I/O mapping grid that enables any of the inputs or outputs to be mapped to any module in the system.Configuration is b...

.00 ing Made EasyThe (TLM) is a compact and cost effective solar powered water tank level monitoring system.Our web-based dashboard technology shows you tank level information and sends alerts for water levels or significant rates of change.Cellular coverage is not needed – the TLM is an IoT device and uses LoRa low power radio.Add the starter kit to your cart today.

IMS is an advanced web-based application that allows farmers to manage all their irrigation and sensor devices, in one place. When signed into the IMS dashboard, the user can visualise and control their sprinkler operations using real time maps of their farm. Sprinkler schedules can be set individua...

The EP3 is a small hand-held device which the farmer can use when out in the field. It can be used to obtain satus information from an IPC, manual operation of a sprinkler or inhibit its operation programming schedules and configuration in the field. Key Features- The EP3 display is a resistive touc...

The IPC is an intelligent solid set sprinkler controller. It is solar powered, managed remotely by mesh radio and is completely autonomous in its operation.The IPC works with fixed sprinklers or pods that have pump-controlled reticulated water supply.The IPC is a standalone, programmable timer-based...

$1,405.00The QTech SMS Controller uses SMS/text messages to provide multiple people with alarms, status conditions and the ability to control devices (and receive a confirmation SMS) – all from your smart phone.Network support on the following; 4G bands (MHz): 2100, 1800, 850, 900, 700 and 3G ...

.00Omni-directional whip antenna suitable for use on 3G & 4G cellular networks.Product Code: PD9243All QTech products may be subject to delivery advice when ordered.

.00Fully waterproof 2-3 dBi unobtrusive antenna for cellular applications.Product Code: PD9245All QTech products may be subject to delivery advice when ordered.

.00The SMS Lite is a 4G SMS controller providing cellular remote control. It uses text messages to provide up to eight people with status conditions, notifications and control options for its four switched inputs and two relay outputs.It is operational within minutes with the minimum configuration ...

0The DIN rail mount is suitable for all of the SMS Lite and Wireless Point to Point (WP2P) modules.The mounting bracket provides easy DIN rail mounting options in switchboards or control panels.The mounting bracket is made from 2mm mild steel with a powder coated finish and is supplied complete with an aluminium DIN rail clip.

0Plug Pack – 230V AC Input – 13.8V DC OutputThis plug pack is recommended for use with our:• WP2P Wireless Point to Points – All Digital, Analogue and Repeater modules• SMS Lite• SMS Controller• QDR Digital Radios• Q48 P2P systems• Multipoint ControllerIf requested, this can be supplied with optional 3-pin Phoenix connector

$18.501m long DC Power Cable – 2.1mm JackIdeal for use with the QTech Wireless Point to Point (WP2P) modules, WP2P Repeater and the 4G SMS Lite controller.Alternatively, a range of power packs are available with this 2.1mm DC jack for powering these products.

$1,195.00 The Digital & Analogue version of the QTech Wireless Point to Point (WP2P) system enables you to transmit both an analogue 4-20mA sensor reading and two digital signals up to 4km.

.00The WP2P Slave Modules are used to build both the WP2P Star and Multi Point Controller networks.The Multi Point Controller allowing you to create a network of up to eight slave modules over a range of 4km.Each of the WP2P Slave Modules has three switched inputs and three relay outputs. Now you c...

.00The Wireless Point to Point Repeater enables QTech Data Systems’ Wireless Point to Point (WP2P) modules to cover far greater range or operate in locations with obstructions such as hills, vegetation or buildings. Using the Wireless Point to Point Repeater the wireless signal between the WP2P M...

$1,640.00The Q48 Point to Point (Q48-P2P) is a multiple input – multiple output wireless control system.Each of the Q48-P2P modules has eight switched inputs, eight solid-state outputs, two 4-20mA inputs, and two 4-20mA outputs which allows you to transmit analogue and digital signals over a r...

.00The Digital Wireless Point to Point (WP2P) system is a wireless remote control solution with three switched inputs & three relay outputs. Simply operate a switch and the relay at the other end operates, allowing you to remotely monitor & control three independent devices.There is no conf...

The PD9250 is an industrial grade gas discharge lightning protector for coax antenna systems.It features low insertion losses and is suitable to use from DC to 3000MHz.Good earthing is crucial for maximising lightning and discharge protection, and careful installation of equipment at radio sites hel...

.00External Mounting Yagi Antenna900MHz 6dB 4 Element Yagi5m coax, high gain antennaSMA connector and pipe clampHeight 180mm maxLength 400mmUse these for WP2P and QDR systems to achieve maximum range.Product Code: PD9225All QTech products may be subject to delivery advice when ordered.

.00A robust quarter wave omni-directional whip antenna for longer range applications.Ideally suited for master multi-point applications and as a higher gain alternative for the 900MHz 3dBi Vertical Fibreglass Whip Antenna.Applications include longer range requirements for the following QTech produc...

.00A robust quarter wave omni-directional whip for shorter range applications of all QTech 900MHz productsAn ISM Band 900MHz, 3dBi Fibreglass encapsulated vertical whip, 400mm long and is supplied with 5M of low loss coax terminated with a SMA (Male) connector.Use for a professional, external mount...

.00In-Line Power Pack – 230V AC Input – 13.8V DC OutputThis plug pack is recommended for use with our:• Wireless Point to Point systems (all Digital, Analogue and Digital, Repeater modules• SMS Controllers• QDR Digital Radios• Q48 P2P systems• Multipoint Controller

.00 Indoor use onlyThis plug pack is recommended for use with our:• Wireless Point to Point systems (all Digital, Analogue and Digital, Repeater modules• SMS Controllers• QDR Digital Radios• Q48 P2P systems• Multipoint ControllerNote this is 110V AC input only, mainly used with Centre Pivot irrigation with 110V supply.