3rd Axis Prints 190 views ♡

Easy to use removable PEI print bed / build plate. It's as simple as slightly bending the spring sheet and the print will pop straight off. Surface: PEI Smooth & TexturedSize / Colour:- 120x120mm Gold (Voron 0.1)Includes 3M adhesive magnetic sheetPlease double check the size you require before ordering.

Replacement Needle to suit MKS 3D Touch Auto Leveling Sensor

Upgrade kit for the MK8 extruder.This model also allows you to adjust the spring tension in place without removal.Material: Anodized AluminiumHardware: Includes all hardware for mounting including brass gear. Colour: Gold Please check image to compare to your own printer.

Replacement Brass Nozzle to suit Creatbot D Series 3D Printers Material: Brass Size: 0.4mmFilament size: 1.75mm / 2.85mm

Replacement extruder gear. Ideal for abrasive filaments such as Carbon Fiber, Glow in the dark, Glass Fiber, Wood. Material: Stainless SteelSizes: (Inner x Outer Diameter)- 5x11mm- 5x12mm- 8x12mm Includes grub screw. Note: Creality extruders require the 5x11mm gear.

Replacement extruder gear for various extruders such as the MK8. Material: BrassInner Ø: 5mm Outer Ø: 11mm Includes grub screw.

Replacement Bowden Tube Coupling Clip.Size: 5.0mm ID Please check these will fit the coupling you have before ordering.

Replacement coupling and clip to suit some Ultimaker 3D Printers.

Replacement to suit the most common 3D Printers.Types: V6 Material: Stainless SteelThese are to suit PTFE (Bowden Tube) lined Hot Ends. They are not for all metal Hot Ends.

Replacement heater cartridge for most 3D Printers.Voltage: 12VWattage: 40W or 50W Length: 1M

Replacement Thermisistor to suit some common 3D Printers.Spec: 100K

Ultra Silent Stepper Driver suitable for some 3D Printer Motherboards with drop in Stepper Drivers.Brand: MakerbaseModel: TMC2225 V1.0Heatsink Material: Aluminium.Heatsink Colour: Anodized BlueOperating Mode: STEP/DIR or UARTVoltage: 4.75-36VRated Motor current: 2A (RMS) MaxMax Microsteps: 256

used for adjusting carriages on various 3D Printers with V-slot & wheel style carriages.

Upgrade kit for the Creality, MK8 and similar extruders.Ideal for replacing the plastic assembly that comes on some factory printers which is prone to breaking.Material: Anodized AluminiumHardware: Includes all hardware for mounting including brass gear.Colours: Red / Orange Please check the image to compare to your own printer.

Securing clamp for 6mm timing belt.

Upgrade kit for the Dual Gear Creality CR series, MK8 and similar extruders.Ideal for replacing the plastic assembly that comes on some factory printers which is prone to breaking.Material: Anodized AluminiumHardware: Includes all hardware for mounting including gears.Colour: Red Please check the image to compare to your own printer.

Thermistor to suit various 3D Printers.Spec: 100KIncludes: Cable & Connectors

Replacement Nozzle for various 3D printersType: "Volcano" Thread: M6 1.0mmOverall Length: 21mmMaterial: BrassFilament Diameter: 1.75mmNozzle Diameter: 0.2 / 0.3 / 0.6 / 0.8 / 1.0 / 1.2mm

Replacement Nozzle for various 3D printersType: MK8Thread: M6 1.0mmMaterial: Stainless Steel - Suitable for applications where food grade or abrasive filaments are used. Filament Diameter: 1.75mmNozzle Diameter: 0.3 / 0.4 / 0.5 / 0.8mm

Replacement Nozzle for various 3D printersType: MK8 Thin Thread: M6 1.0mmMaterial: Hardened Steel - Suitable for applications where abrasive filaments are being used such as carbon fiber, glass fiber and glow in the dark. Filament Diameter: 1.75mmNozzle Diameter: 0.8 / 1.0 / 1.2 / 1.5mm

Replacement Nozzle for various 3D printersType: V6 Thread: M6 1.0mmMaterial: BrassFilament Diameter: 1.75mmNozzle Diameter: 0.25 / 0.3 / 0.35 / 0.5 / 0.8 / 1.0mm

Replacement Nozzle for various 3D printersType: V6 Thread: M6 1.0mmMaterial: Stainless Steel - Suitable for applications where food grade or abrasive filaments are used. Filament Diameter: 1.75mmNozzle Diameter: 0.5 / 0.8 / 1.0mm

Replacement Nozzle for various 3D printersType: V6Thread: M6 1.0mmMaterial: Hardened Steel - Suitable for applications where abrasive filaments are being used such as carbon fiber, glass fiber and glow in the dark. Filament Diameter: 1.75mmNozzle Diameter: 0.4 / 1.0 / 1.2 / 1.5mm

Replacement Nozzle for various 3D printers Type: VolcanoThread: M6 1.0mmOverall Length: 21mmMaterial: Hardened Steel - Suitable for applications where abrasive filaments are being used such as carbon fiber, glass fiber and glow in the dark. Filament Diameter: 1.75mmNozzle Diameter: 0.8 / 1.0 / 1.2 / 1.5mm