Resin Art 99 views   2 clicks Claim this Business♡

These Hardeners are part of a TWO PART system that works ONLY in conjunction with West System 105 Resin.207 Special Coating Hardener is formulated for use with WEST SYSTEM 105 Resin for coating applications where an extremely clear finish is desired. This hardener also provides excellent adhesion fo...

West System pump dispensers are calibrated for accurate dispensing and to avoid mess. Each Pump Kit comes with 1 x Resin Pump and 1 x Hardener Pump dispenser and are available in three easy to use sizes.300 Series PUMP KIT (5:1)Calibrated for the following West System kits with the 205/206 hardener:...

WEST SYSTEM Epoxy fillers are used to thicken the basic epoxy resin/hardener mixture for specific applications. Each epoxy filler possesses a unique set of physical characteristics, but they can generally be categorized as either Adhesive (high-density) for bonding applications or Fairing (low-densi...

WEST SYSTEM Epoxy fillers are used to thicken the basic epoxy resin/hardener mixture for specific applications. Each epoxy filler possesses a unique set of physical characteristics, but they can generally be categorized as either Adhesive (high-density) for bonding applications or Fairing (low-densi...

Transil 5A Fast Set Moulding SystemThe the newest member of the Transil range. This two-component, addition (platinum) curing, low viscosity silicone is designed for taking very fast impressions. Compared to the standard Transil, this silicone rubber is much softer once cured. The pot-life is the sa...

Introducing the newest range of silicone pigments from Neill’s Materials. Created by Neill Gorton, this life-like colour system comprises highly concentrated silicone pigments in custom colours that go a very long way. They will save you both time and money and help maintain perfect continuity acr...

Transil TC-5130 Fast Set Moulding System – New Formula!The has been upgraded to a new formula. This two-component, addition (platinum) curing, low viscosity silicone is designed for taking very fast impressions. Now, the pot-life has been extended to 8-10 minutes. It is ideally suited for fast set...

RD-407 Mask Making Latex® is the highest quality casting latex available for mask making, prop making, and slush moulded prosthetics. Formulated specifically for casting into gypsum moulds, RD-407 Mask Making Latex is a single component, air drying natural latex compound used widely by mask makers ...

an optional additive for polyurethane resin, making it extremely durable and virtually scratch-proof. The Grit won’t settle when mixed but will remain suspended, making it easy for dip-and-roll applications. - UV Stable- Turns Gloss polyurethane into a satin finish (Matte is unaffected) //window....

Platinum cure liquid silicone rubber is a two-part liquid silicone rubber, which features an exceptional fluidity, good operability, resistance to deformation, high temperature and good flexibility. Non-Toxic with platinum catalyst, 100% food safe. Shore A 30.Every pack include 1x 1kg Part A and 1x ...

It is semi-transparent addition cure detail Liquid Silicone Rubber.500g pack include 1x 250g Part A, 1x 250 g Part. Shore A 20.1. Mix well in the silicon cup. Mix ratio: 1 (Part A):1 (Part B) by weight.2. Pour into the casting box. Working time: 30 mins (Temp: 25-30°C)3. Allow 3-6 hours to dry. Hea...

Platinum cure liquid silicone rubber is a two-part liquid silicone rubber, which features an exceptional fluidity, good operability, resistance to deformation, high temperature and good flexibility. Non-Toxic with platinum catalyst, 100% food safe. Shore A 20.Every pack include 500g Part A and 500g ...

Add UV additive to polyurethane liquid rubbers and plastics to improve exterior durability and reduce surface degradation caused by sunlight or other UV light sources. Add 0.5% of the total mix weight of the rubber or plastic. NOTES: Add UV Additive to Part B prior to mixing with Part A. //window.d...

It is a non-reactive silicone fluid that will lower the mixed viscosity of tin cure (condensation) or platinum cure (addition) silicone rubber products. When used in small amounts of up to 10% it allows for retention of physical properties while reducing the viscosity of the total system.//window.da...

Microfibre Blend 413 is a mixture of short-fibre cotton and colloidal silica. It has largely replaced pure Colloidal Silica and pure Microfibre as thickening agents for WEST SYSTEM liquid resins.Size: 4L

West System®105 Epoxy Resin is the base material on which all West System 105 System epoxy compounds are built. The resin is a clear, low-viscosity liquid epoxy resin. Formulated for use with West System hardeners, it can be cured in a wide temperature range to form a high-strength solid with excel...

WEST SYSTEM 205 FAST HARDENERWEST SYSTEM 205 is used at lower temperatures to produce a rapid cure that develops its physical properties quickly at room temperature.205 Fast Hardener® is a medium-viscosity epoxy curing agent. When mixed with the 105 Resin in a five-part resin to one-part hardener r...

Clearsil addition-curing 2-component silicone rubber that vulcanizes at room temperature ( RTV ). Being remarkably fluid, it is suitable for duplicating models with small undercuts.Compatibility extends to all plasters, waxes, polyurethane and acrylic plastics.Properties and application• High chem...

- Impression Powder: This high quality chromatic phase indicator Moulding Powder is colour changing to help you through the process starting at pink then fading away, white once it has set.- Casting Powder: Having a dry strength makes your piece extra strong, so be sure to buy something that you kn...

It is semi-transparent detail Liquid Silicone Rubber. Every pack include 20kg Part A, 20kg Part B. Shore A 20. 1. Mix well in the silicon cup. Mix ratio: 1 (Part A):1 (Part B) by weight.2. Pour into casting box. Working time: 30 mins (Temp: 25-30°C)3. Allow 3-6 hours to dry. Heating will be helpful...

- Pre-mixed, Ready to Pour - This high-flow paint has the right ratio of pouring medium already mixed in, so no need to worry about prepping your paint- Pouring Acrylic Paint in 19 Colors - This impressive set includes 19 vibrant colors from metallics to neons to pastels and primaries. You’re nev...

Artmore Bound silicone rubbers are easy-to-use platinum-cure silicone rubbers which self-thicken for making brush-on molds of almost any model. Mixed 1A:1B by volume, Bound can be applied with a brush or spatula to vertical surfaces without sagging and will cure with negligible shrinkage to a flexib...

Artmore Skin silicones are used for a variety of applications, ranging from creating skin effects and other movie special effects to making production molds for casting a variety of materials. Due to their superior physical properties and flexibility, they are also used for medical prosthetics and c...

Artmore Body is a long lasting platinum-cure silicone rubber that can be applied directly to the skin to make molds of the face, hands and other body parts. The rubber cures quickly and will reproduce perfect detail from any original model – far better detail than any alginate! Artmore Body is ski...