Rockboat Marine 9 views   3 clicks ♡

Bench seat holder, made from black plastic.

Carry bag and storage bag for inflatable boats, inflatable kayaks or inflatable rafts.Comes with 2 lifting handles.125cm long x 75cm high.

Stainless Steel D-ShacklePin: 8mmOpening gap: 18mm

PVC molded D-ring60mm PVC BaseStainless steel D-ringColour: WhiteCompact design that is glued directly onto your boat.Glue not included.Price is each.

Rockboat Outboard Hydrofoil. Two Sizes:RB40: 8HP to 39HP (except Mercury 40/50/60HP four strokes)RB350: 40HP to 350HPImproves steering at both low and high rpmsReduces porpoising and cavitationFast planing and lower on-plane RPMs saving fuelCrescent shaped surface funnels water flow for more thrust ...

Rockboat Prop Guard.Select size from drop down menu.NOTE: the 9.9HP - 20HP is a 2 piece guard.Ensures the safety of family, friends, skiers divers and marine lifeProtects the propeller when used around rocks and underwater hazardsAllows safer operation in shallow watersLess chance of the rope tangling in the propellerRequires drilling.Supplied with bolts and lock nuts.

Boat Launching Wheels.These dinghy wheels will make your day so much more enjoyable. Pneumatic wheels help to go over rough ground and also gives a bit more height so the outboard doesn't scrape on the ground. The curved legs allow for extra room as the wheels sit further away from the transom, so w...

Oars made with strong aluminum shaft with PP blade.1.42m long, 2 piece.Sold as a pair.

Rockboat Outboard Motor Trolley.Feature:Easy to install and remove, foldable, lightweight outboard motor bracket.Suitable for outboard motors of 25hp and below.Ergonomic handles make the cart easy to steering and transport.The carrier has multi‑purpose, can use for transport, also for display and repairing.Professional manufacturing, stable performance and high reliabilityRequires assembly

Used for attaching a stand off bracket to an inflatable dinghy Price is for 1 pad only. Normally 2 are required per boat.

9.5cm Extended Snap Davits from Rockboat® Supplied free with 2 x quick release davit plates valued at $168 at no extra cost. See below for further information.Rockboat heavy duty vertical snap davits are used for attaching your inflatable boat to the swim platform which makes it easier and safer, t...

Vertical Mount Snap Davits from Rockboat® Supplied free with 2 x quick release davit plates valued at $168 at no extra cost. See below for further information.Rockboat heavy duty vertical snap davits are used for attaching your inflatable boat to the swim platform which makes it easier and safer, t...

Adapter for inflatable boats, kayaks that use Halkey-Roberts type valve.Suits Halkey Roberts type valvesHose diameter 20mm IDSupplied with 1 x rubber seals

D-ring with patch for PVC inflatable boats.Price is for 2 patches of the same colour. Heavy duty D-Ring made from 316 stainless steel, 45mm x 40mm highPVC patch - approx 120mm diameterAvailable in black,light grey and red (colour may vary to images) for 100mm d-rings.Glue not included but is available from this site.

Universal tender chocks are made to support hard bottom dinghies or inflatable hard bottom dinghies (RIBs) on the deck or bridge of a yacht. Simply secure to your deck, roof or swim platform and your tender will be supported securely This Standard tilting and swiveling model chock has pads that are ...

Rockboat Folding Launching Trolley. Dinghy Launching Trolley - A stainless steel launching trolley which folds up for easy storage.Made from stainless steel, it has a carrying capacity of 160kg and will fit most dinghies & inflatables up to 3.9m. - Overall Trolley Length: 2.210 (not including wheels...

Dinghy launching wheels with quick removable plates.No longer the hassle of having to leave your wheels mounted to the boat. These wheels are supplied with a plate that gets mounted to the boat and the wheels can then be slide in and out of the mount.Our dolly wheels have three positions so you can ...

Snap Davit kit with Drop and Extended Reach.The reach is 24cm out x 10cm down from the front of the base plate. Used on higher platforms. A lock and lift system that is designed to secure and stabilise an inflatable dinghy to the back of a Motorboat or Yacht. A Practical Design made to be Strong and...

The 12-Volt High Speed Air Pump / inflator for inflatable boats,SUP Boards and kayaks is powerful and reliable and has a built in cut off-switch that automatically turns pump off when the desired air pressure is reached. Air Pump is perfect product for:- Inflatable boats.- Inflatable rafts.- Inflata...

Introducing our Dual Wheel Launching Wheels: the perfect accessory for hassle-free boat launching and retrieval. Designed with durability and convenience in mind, these launching wheels are here to make your boating experience a breeze.Crafted from high-quality materials, our dual wheel system ensur...

PVC repair patches for inflatable boats.Includes 2 patches (of the colour you choose) Colours available: Light Grey, Black, Dark Grey, Blue or RedEach patch is approx 15cm x 12cm and may vary PVC boats only.Price is for 2 x patches only

Large PVC repair patch for repairing inflatable boats.Available in black, grey, blue, white, red and dark grey.Price is for one patch 75x15cm

PVC repair kit for inflatable boats.Includes:1 x PVC patch 75x15cm, available in dark grey, red, white, blue, grey and black. Choose your colour from the drop down menu.1 x 200mm MEK cleaner1 x 200mm Bostik 999 glue1 x Desmodour RFE (For water applications the RFE Desmodur must be used)1 x Stirrer

Inflatable Boat Telescopic 4-Step LadderEffortless Boarding, Maximum ConvenienceDesigned specifically for inflatable boats, this Telescopic 4-Step Ladder is the ultimate solution for easy, stable access in and out of the water. Whether you’re diving, swimming, or simply coming aboard, this ladder ...