RV MEGA 264 views   7 clicks Claim this Business♡

AL-KO Corner Steadies develop the maximum load bearing capacity from a setting angle of 45 degrees. If the corner steady is set flatter, the load bearing capacity is reduced.Suitable for rear fitment to all caravans on an AL-KO Chassis, either as a replacement, or as an upgrade.Those steadies are ea...

The "drop down" corner steady requires only a small amount of lowering to steady the caravan and can be swung from the horizontal travelling position to a number different angles including the optimum position of vertical. It has a hex drive and comes complete with a bigfoot making it ideal for soft...

Corner steady foot - Very high quality and innovative design that will give years of service. They are designed to remain firmly in place and resist theft attempts meaning that once fitted they remain fitted.Features- Uses a unique 'clip and lock' system incorporating a rattle proof spring-loaded de...

Toli Carasafe Ratchet Caravan Scissor Jack - Ideal equipment to remove your wheel in case of a flat tyre on your caravan or vehicle.Features- Integrated ratchet operation foe easier lifting and lowering- Supplier with wrench handle- Min Height: 100mm- Max height: 350mm- Jack Dimensions when packed :...

Features- Replacement 20mm square thread cast nut for the European Corner SteadyWill fit most AL-KO corner steadies on imported caravansNote - The 2 side retaining screws need to be fitted using an impact screwdriver (screws not included)This listing is for 1x spindle only- Please check the casting number on your original nut. 355198 pre 2006 357864

Extendable stable base for corner steadies - Extend the reach of a corner steady between 40 - 150mm.Features- Robust and stable design- Made with durable Polypropylene- Set of 4

Provide a, front corner steady, stable base for your caravan.Dimensions- W260 x H100(min) - 500(max)mmFeatures- Easy to operate- Not suitable for rear fitment. Suitable for front fitment depending on dimensions as shown in the documents tab.- Suitable for caravans with MTPLM of up to 1,300kg- To det...

Corner steadies are designed to stabilize the trailer or caravan when stationary. Remember that they are not designed to be used as a jack or as the method of lifting the trailer off the ground.This corner steady is designed to be bolted to the side of your chassis.Dimensions- Length: 500mm- 22mm AF...

450mm corner steady handle with 19mm hex head.Dimensions- W450 x H170 x D40mmFeatures- Zinc plated - corrosion resistant- Used to raise and lower Hex Drive corner steadies- Fits 19mm Hex Bolts (3/4")- Al-KO part number: 654845

Leisurewize 19mm Caravan Corner Steady Winder With Drill AdapterFeatures- Includes Free 13mm A/F Thread peg socket adapter- Fits all cordless drills- Makes easy work winding down the caravan legs- Hexagonal shaft for improved grip

Corner Steady provides an essential stable base for your caravan.The corner steady is hot-dip galvanised for corrosion protection and is easy to operate.- Suitable for rear fitment to all caravans.- AL-KO part number 205817- T-bar hole centres 190mm- T-bar centre to rear fixing 605mm- Max. height 500mm- Weight 3.6kg

Suitable for rear fitment to most UK caravans, either as a replacement, or as an upgrade. To determine which corner steady is currently on your caravan it is recommend removing the corner steady in question and either locating the stamped part number, or checking the dimensionsFeatures- Provide a st...

Suitable for rear fitment to all caravans on an AL-KO Chassis, either as a replacement, or as an upgrade. To determine which corner steady is currently on your caravan it is recommend removing the corner steady in question and either locating the stamped part number, or checking the dimensionsFeatur...

The AL-KO Hex Winder Handle is simple to use and provides plenty of torque from its hand crank design most importantly thou it is correctly sized to suit the AL-KO corner steady with a 19-mm hex socket.Dimensions- Length: 800mm (including the handle)Features- Zinc plated for corrosion resistance- Used to raise and lower Hex Drive corner steadies

Jumbo Carafeet stabilising feet feature an extra large footprint area to prevent the corner steady legs sinking on soft ground or gravel. Simply attach to your caravan corner steady legs to keep your caravan stable on-site.Quick and easy to install with the provided metal mounting pins and clips. No...

Replacement handle to suit Corner Steady.Features- Fits Any AL-KO Drop Down Corner Steady- Red plastic construction- Easy to replace- AL-KO part number: 654880

The "drop down" corner steady requires only a small amount of lowering to steady the caravan and can be swung from the horizontal travelling position to a number different angles including the optimum position of vertical. It has a hex drive and comes complete with a bigfoot making it ideal for soft...

Set of four jack pads, to prevent corner steadies sinking in to soft ground or gravel. Supplied with metal pins - these will not break.Simply secure to your caravan steady legs and you're set! No need to remove while you're on the move as they remain secured to the caravans steady legs so you don't ...

This zinc plated 510mm drop down corner steady has a hex drive and comes complete with a bigfoot making it ideal for softer ground. Corner steadies are not designed to be used as a jack or as the method of lifting the trailer off the ground. They are designed to stabilize the trailer or caravan when...

The AL-KO Big Foot provides the corner jack with a flat load bearing surface, ideal for soft ground and is able to be fitted to most caravans/trailers corner jacks on the NewZealand Market.Dimensions- Bracket width: 80mm- Pad diameter: 140mmFeatures- Anti sinking bases for the bottom of jack legs- N...

Replacement Drive Gears for Drop Down Corner Steady, pack of 2.Kit Includes:- 2 x Gears- 2 x Large Roll pins- 2 x Small Roll Rins

Helps prevent your jockey wheel sinking into the ground while also keeping it secure.Features- Heavy duty plastic- Suits wheels up to 6 inches in diameter

Helps prevent your caravan stabiliser legs sinking into the ground.Features- Heavy duty plastic- Pack of 4- Handy handle

Konekt-a-Pad - Providing a stable base for caravan corner steadies.Features- Quick & simple to attach - no tools required- Robust and stable design- Help spread the weight to stop your caravan from sinking into the ground- Strong Polypropylene construction- Universal- Set of 4