RV MEGA 264 views   7 clicks ♡

Hatch Stay - Suitable for securing hatches partially or fully open.Stainless rod slides inside a stainless tube and is clamped tight in any position with plastic knobbed bolt.DimensionsAdjusts from 330 to 600mmInner rod diameter: 9.5mmOuter tube diameter: 12mmFeaturesMarine grade constructionSliding tube material: all stainless steel with brass plated mounting fittingsTwo fixing holes on each end

Hatch Adjuster - This stay is suitable for securing hatches partially or fully open.DimensionsOA Length Retracted: 245mmOA Length Extended: 415mmFeaturesStainless bar slides within a frame and is clamped tight in any position with plastic knobbed boltA stop prevents arm from coming apart in the even...

Rubber flock spray seal

S4 Window Catch - Right Hand. Includes catch only.Dometic part number: BG1036

S4 Window Catch - Left Hand. Includes catch only.Dometic part number: BG1037

Polyfix Lever Lock Catch - the lever latch slides onto a tee shaped block fitted to the window.FeaturesMaterial: polyplasticSold as a single unitTo remove, push a small nail or similar into the hole in the latch body and slide awayPart number: PP8000

This type of tube stay is fixed to the window by using screws.Dimensions- Length from hinge pin to hinge pin when fully retracted: 300mmFeaturesLever lock typeAluminium and black plastic endWindow screw hole centres at 20mm / Window frame hole centres at 24mmSold as a pair - left and right hand

Plastoform window stay, with screw, left hand side, 265mm to 415mm length.

Plastoform window stay, with screw, right hand side 205mm to 295mm

AMT Window Locks and Top Hinges are designed to fit the 12mm diameter stays fitted to most Caravans and Motorhomes.Simple to fit, attractive light grain finish and very strong. AMT Window Locks and Top Hinges are supplied with the replacement pin pre inserted.Dimensions- Internal diameter: 12mmFeatu...

FeaturesPair of Click Clacker window staysSuits 300mm high windows

This type of tube stay is fixed to the window by using screws.Dimensions- Length from hinge pin to hinge pin when fully retracted: 200mmFeaturesLever lock typeAluminium and black plastic endSold as a pair - left and right handSupplied complete with top hinge and screw fitting kit

Hartal Replacement Flyscreen Clips, packet of 10.

FeaturesRight handSize small - 190mm

This type of tube stay is fixed to the window by sliding onto a dovetail. To remove, insert a small pin or nail into the hole and slide off.Dimensions- Length from the top of the stay to the pivot point when the stay is in the closed position: 200mmFeaturesLever lock typeAluminium and black plastic end with friction tightener at the topNo need for screwsSold as a pair - left and right hand

Window Blind End ClipsFeaturesStrong and sturdyClip into end of blind to guide in side railSold as a pair - left and right hand

Plastoform Window Stay, with screw, right hand, length 265mm to 415mm.

Plastoform window stay, with screw.- Left hand side 205mm to 295mm

Spare part for Maygood / Mobicool Window (also called Qflow or CHAL) made by Maygood, China and distributed by Dometic.

Tube Stay Lever Lock 230mm (2).All polyplastic window fittings are available in either a standard screw-on fitting or the more recent variant of the slide-on Polyfix design.Screw-on fitting.

UK Polyfix 230mm Tube Stay - Lever Lock (2).Standard screw-on fitting or the more recent variant of the slide-on Polyfix design.The slide-on Polyfix design are easily recognisable by the deep grove moulded in to the back of the window fitting. It is this that slides over the adaptor fitted to the window.Supplied as packed pairs with fittings.

The Caravan Window Stay Replacement Top Hinge for Caravan Motorhome Black is a practical solution for repairing broken window hinges in caravans and motorhomes. There's no need to replace the entire set - this top hinge is designed to fit the 12mm diameter stays commonly found in most caravans and m...

The Caravan Window Stay Replacement Top Hinge for Caravan Motorhome Black is a practical solution for repairing broken window hinges in caravans and motorhomes. There's no need to replace the entire set - this top hinge is designed to fit the 12mm diameter stays commonly found in most caravans and m...

All polyplastic window fittings are available in either a standard screw-on fitting or the more recent variant of the slide-on Polyfix design.The slide-on Polyfix design are easily recognisable by the deep grove moulded in to the back of the window fitting. It is this that slides over the adaptor fitted to the window.Supplied as packed pairs with fittings.