Scaffold Safety Supplies 13 views   4 clicks ♡

Swivel Girder Couplers are used to connect beams to scaffolding tubes.They are also known as a Swivel Beam Clamp.

Board Retaining Clips hold boards in place, creating a stable working platform. Board Retaining Coupler are designed to be used in all scaffolding environments where boards are used.Also known as T-Clip or Plank Clips.Our Board Retaining Couplers comply with the AS/NZS standards for scaffolding.

Our Base Plates are for basing out a proprietary scaffold on even ground. Industrial quality, hot dip galvanised and tested to AU/NZ standards.

Scaffolding ledger-to-plank connections form the primary horizontal support system of a scaffold structure. The ledger runs parallel to the building and securely supports the scaffolding planks, distributing load evenly across the frame.

Scaffolding ledger-to-plank connections create a continuous, stable working platform by securely positioning planks side by side. This set up ensures even load distribution and minimises movement between planks.

Scaffolding Infill planks are used to fill gaps between standard scaffold planks, creating a complete and secure working platform.

Self Closing Adjustable Gates are designed to provide safety to those working at heights.- Always to the closed position for maximum safety- Opening size: 0.73m - 1.09m

A Step Down Bracket used to create safe changes in scaffold platform height, providing stable stepped access between working levels.

Allows for the connection of Ringlock Ledgers anywhere along the length of a bay. Commonly used to connect a three leg return.The coupler has a single rosette opening that a typical Ringlock Ledger connects to. Also referred to as a transom coupler.Hot Galvanised dip. AS/NZ Certified.

Used to punch up a standard off a scaffold tube or ledger, commonly used to create gate openings or start a shorter bay off an existing scaffold.Hot Dipped Galvanised. AS/NZ Certified

Girder Couplers are used to connect beams to scaffolding tubes.They are also known as a Beam Clamp.

Our U Head Jacks are for designed to level and support concrete formwork or scaffolding systems. Industrial quality, hot dip galvanised and tested to AU/NZ standards.200 200mm Head

Our Acrow prop is an adjustable steel prop used for temporary support. Typically consisting of telescopic tubes with a locking pin and screw mechanism to secure them at the desired height. Industrial quality, hot dip galvanised and tested to AU/NZ standards.1750-3150mm Size 1

Our Corner Boards are used for an internal infill or to be used on a Hop Up for a step out.Corner Boards are used for residential, commercial, formwork and scaffolding applications.

Used to punch up a standard off a scaffold tube or ledger, commonly used to create gate openings or start a shorter bay off an existing scaffold.Hot Dipped Galvanised. AS/NZ Certified

Allows for the connection of Ringlock Ledgers anywhere along the length of a bay. Commonly used to connect a three leg return.The coupler has a single rosette opening that a typical Ringlock Ledger connects to. Also referred to as a transom coupler.Hot Galvanised dip. AS/NZ Certified.

Bridging Ledgers are used in place of regular ledgers for birdcages and loading bays.Bridging O-Type Ledger, 48.3 3.2MM

Hop Up Brackets are used to cantilever 1 to 3 planks off an existing set of standards on a scaffold bay. Tested to meet NZ/AU standards.Hop up Bracket, Hop-Up O-Type. Available in 3 sizes: 0.39m (1 board), 0,73m (2 board) & 1.09m (3 board)

Base Collars are designed to sit over Base Jacks to base out at the foot level of the scaffolding structure. Base Collars are easy to erect and dismantle and provide more options when working on a sloping or uneven surface.48.3 3.2MM

Our Base Jacks are for basing out a proprietary scaffold on uneven ground. Industrial quality, hot dip galvanised and tested to AU/NZ standards.38 5.0mm

Aluminium scaffolding stairs are industrial quality and tested to and AU standards. Providing convenient access for carrying material up and down your scaffold. Comes in lengths of 2.57m & 3.07m.

Aluminium Ladders provide safe and quick access between upper and lower levels. Our ladders are durable and sturdy while still being lightweight and easy to handle.

Ringlock Steel Plank with latch, 320 76 1.5MM, 320mm- O-Type.Available in 7 sizes: 0.73m, 1,09m, 1.4m, 1.57m, 2.07m, 2.57m, 3.07m

Scaffold hatch decks provide access between lifts within the scaffold. Hatch decks are fully Aluminium, tested to and AU standards.Hatch deck with ladder, O-Type, W: 610mm - 2.57m & 3.07m lengthsFull Aluminium