Victron Battery Balancer 24V/48V – BBA000100100 | NZ

Mount the balancer vertically on a well-ventilated surface close to the batteries, but never directly above them where corrosive battery gases may collect. Use correctly sized wiring and DC protection. Installation should be completed or checked by a suitably qualified person. Victron Battery Balancer FAQs How many Battery Balancers do I need for a 24V bank?

One balancer is used with two series-connected 12V batteries forming a 24V bank. How many do I need for a 48V bank?

Use three Battery Balancers across four series-connected 12V batteries. Can Battery Balancers be connected in parallel?

Yes. Victron states that several balancers can be paralleled when more balancing capacity is required. Is the Battery Balancer waterproof?

No. Its enclosure is rated IP22, so it should be installed in a dry, protected and ventilated location. What does the red alarm light indicate?

The red LED and alarm relay activate when midpoint deviation exceeds 200mV. The alarm resets after deviation falls below 140mV or system voltage falls below 26.6V.

What is included: one Victron Battery Balancer. Battery cables, fuses and reset switch are not included unless stated separately.