Sound To Light 352 views   14 clicks Claim this Business♡

3 Pin XLR Male to 5 Pin XLR FemaleUsed for DMX 3-5pin Conversion150mm long

- Two banks of faders labeled 1-12 and 13-24, in a typical two preset configuration for setting up general lighting looks and manual operation.- Three preset masters labeled Red, Yellow and Grab.- Flash/Assign pushbuttons with integral indicator LED for each of the 24 preset faders and each of the ...

Control up to 12 DMX devices with this amazing desk and have up to 16 channels per device.Create scenes and save them into the built-in memory230VAC via IEC cable 1M longA good video showing programing can be found here

Mantra Lite Wing - Provides 12 additional fixture faders, 10 additional playback faders, 1 additional DMX universe and output connector. Up to two wings can be connected to a single Mantra Lite. USB powered. Includes Dust Cover

On Sale 50% OffEight WAY DMX SIGNAL AMPLIFYING DISTRIBUTORone input with eight outputs and pass throughfully compliant to dmx-512 specification3 pin XLR input and a passive loop through.8 way isolated DMX splitter output.input isolated from outputsoutputs are isolated from each otherdimension: 480x2...

The DMX leads will fit standard DMX plugs and sockets on all your lights. The fit is tight and wll not fall out. There is no latch on the female end but will intergrate with standard metal DMX leads no problem. - Twisted pair shielded cable - For DMX-control or master/slave connection- Accurate- Water resistant type plugs

The DMX leads will fit standard DMX plugs and sockets on all your lights. The fit is tight and wll not fall out. There is no latch on the female end but will intergrate with standard metal DMX leads no problem. - Twisted pair shielded cable - For DMX-control or master/slave connection- Accurate- Water resistant type plugs

The DMX leads will fit standard DMX plugs and sockets on all your lights. The fit is tight and wll not fall out. There is no latch on the female end but will intergrate with standard metal DMX leads no problem. - Twisted pair shielded cable - For DMX-control or master/slave connection- Accurate- Water resistant type plugs

3 pin

D-SPLIT is an optical isolator/splitter for DMX512. Its purpose is to allow the user more flexibility in connecting their DMX controlled devices. Instead of having to make them all fit within a single daisy chain, each of the four outputs from the D-SPLIT can be the start of its own chain, and multi...

DMX512 wireless receiver/transmitter,Working frequency：2.4G ISM,Communication distance：100M（visible distance）230VAC AdaptorYou need 2 of these to replace the first cable run