Steelweb 47 views ♡

A diamond keychain in European 4-1, this weave is delightful to roll through your fingers. Made in aluminium with a stainless steel keyring.We also make these as necklaces, the photographs are only there to give a reference for color combinations.We are also able to provide alternative clasps if thi...

These are reclaimed bike cogs, cleaned and degreased at Steel Web Headquarters. They're all unique with individual wear patterns and aging.Small Cogs are anything under 7cm, sizes listed below S1 - 6.2cm diameter, 2mm thickS2 - 6.1cm diameter, 2mm thick

These are reclaimed bike cogs, cleaned and degreased at Steel Web Headquarters. They're all unique with individual wear patterns and aging.Medium Cogs are 7cm to 10cm M1 - 7.9cm diameter, 2mm thick M2 - 7.4cm diameter, 2mm thick M3 - 8.5cm diameter, 2mm thick M4 - 8cm diameter, 2mm thick M5 - 7.9cm diameter, 2mm thick

A mixed range of small cog and watch pieces in various sizes and shapes. Each order is for 100gm of cogs, there are a range of colors to choose from.All cogs are made of Zinc Alloy

304 surgical grade stainless steel.Listings are for individual hooks, x50 makes 25 pairs

304 Grade surgical stainless earring hooks

These small purse clasps come complete with keyrings Dimensions:Length 4.3cm, height 3.5cm, thickness 1cm, hole 1.6mm

This listing is for clasp between 5 and 6cm, all dimensions are listed below. Some of the connecting holes may need filing depending on the connecting wire used.Kiss Clasp diamond pattern - Length 5.1cm, height 4.2cm, thickness 1.1cm, holes 1.46mm approx Kiss Clasp Floral (three colors) - Length 5.3cm, height 4.1cm, thickness 1.54cm, holes 1.54mm approx

All clasps above 10cmDetails listed below

This kit provides the rings for an 162-face ball made from your choice of solid Aluminium, or a mix of Aluminium and Copper. Designed by Heinrich Zinndorf-Linker of Zili Maille, Kit from Michael Ball at 7M Armouries. This is an advanced kit.Tutorial link: http://tut.zili.de/anymohedron.htm

This kit gives you the rings and instructions to make a standard 72-face Ball. Design by Heinrich Zinndorf-Linker of Zili Maille, Kit from Michael Ball at 7M Armouries. Medium Difficulty KitTutorial link: http://tut.zili.de/japsphere.htm

This kit from Unkamen Designs makes a set of Staggered Byzantine Earrings in Bronze.It comes with all rings, complete instructions, and earring findings.

This kit includes the instruction and rings to make a European 6-1 Coaster measuring 10x8cm.You will need two sets of pliers to make this kit. This is intended as a beginner kit, based on a variation on European 4-1 weave. European 4-1 was used for making hauberks (shirts) and other armour pieces. It is a good weave to start with and is used as a basis for many other weaves.

This kit includes the instruction, findings and rings to make a European 6-1 Cuff measuring 24x3.5cm. This is the longest length cuff I've had to make and usually means you will have rings left over.You will need two sets of pliers to make this kit. This is intended as a beginner kit, based on a var...

Anodized aluminium Cuffs in a range of colors made with Half Persian 4-1 weave.The colored coating on these cuffs will eventually wear off with age. We do not recommend wearing them in the shower or at the beach.The standard size for our cuffs is 18cm. If you require a different length, please PM us...

Simple and comfortingThese necklaces are made partly to look good, and partly because it is immensely satisfying to roll the weave through your fingers. If you are the kind of person who plays with their jewellery, this is the necklace for you. Available in aluminium in a range of colors, either as a block color or with a silver or black edging. Also available as a keyring.

These necklaces are made either with our Stainless Steel Clipper cut rings, or Blackened Stainless machine cut rings. The cut type means the edges can be rougher, so please bear that in mind. Each necklace is fitted with a Lobster clasp to match the material it is made in.You have the choice of soli...

These gorgeously supple necklaces are made in a byzantine weave. You have the choice of a thinner 18G or thicker 16G wire, as shown in the photos. The rings we are using at this point are saw cut for the 18G option, and machine cut for the 16G. If you would like a material not shown here, please. Ou...

This cuff is made with reclaimed bikechain parts and stainless steel rings and findings. It is remarkably thin and light weight considering it's original parts. Perfect for the person in your life who likes the industrial look without the weight! The standard size for our cuffs is 18cm. If you requi...

This is our range of bracelets in Full Persian weave. If you are after a material not listed here, please PM us as we can make these up in any material. The 18G Variant is made in a thinner wire and smaller ring size, as shown in the sizing photographs. The 16G variant is a thicker wire (shown on th...

These cuffs are made in the gorgeously supple byzantine weave. You have a choice of several materials and wire thicknesses, as shown in the photographs. If you want a variation not listed here, please PM us as we hand make all our jewellery and can make any variation.The standard size for our cuffs ...

All our current stock in large scales.AA refers to anodized or colored aluminium. We will be getting other materials as we can.

Small alum scales from TRL

These are split rings made for making scalemaille. They will need split ring pliers to open and close.They come in two sizes, the large split rings are made to be used with large scale, the small split rings are made to be used with the small scale. Please double check you have the right size for the scales you have before checking out.