Techoman Electronics 1 views   1 clicks Claim this Business♡

4:1 Current BalunKey Features/Specifications:- Frequency Range: 1 to 30MHz- Maximum Power: 400 Watts PEP (SSB), 80 Watts Data Modes- Impedance: 50 Ohms- Connection: SO239 for cable 2 x brass terminals for wire

The RBA-1:1 Balun Current Balun was designed to allow easy interface of ladder line antennas and long wires to the LDG line of Automatic Antenna Tuners. The Balun operates "stand alone", thus does not require an LDG Tuner. It may be used with any of your long, random, or ladder line antenna projects...

The RBA-4:1 Voltage Balun was designed to allow easy interface of ladder line antennas and long wires to the LDG line of Automatic Antenna Tuners. The Balun operates "stand alone", thus does not require an LDG Tuner. It may be used with any of your long, random, or ladder line antenna projectsKey Fe...

The RU-4:1 Unun was designed to allow easy interface of vertical and end fed antennas to the LDG line of Automatic Antenna Tuners. The 200-watt Unun also operates “stand alone", thus does not require an LDG Tuner for resonant verticals. It may also be used with many of your antenna projects where ...

The RU-9:1 Unun was designed to allow easy interface of vertical and end fed antennas to the LDG line of Automatic Antenna Tuners.The 200 watt Unun also operates “stand alone", thus does not require an LDG Tuner for resonant verticals. It may also be used with many of your antenna projects where a...

This is a great, low cost, way of getting on HF with this fibreglass vertical. No radials or complicated setup.For use over 80-10m the antenna with acceptable SWR on some bands without a tuner, however we recommend an antenna tuner for a perfect SWR across all bands.Specifications:- Type: Fibreglass...

This KB2 KM-01 quality built Portable Antenna is a revolutionary design consisting of only seven parts. Light weight, wide frequency, ultra-portability, quick to install and package up make this an ideal HF antenna for the Amateur Radio Operator on the go.This kit not only has a wider range of frequ...

This a quality, high grade trapped dipole, covers the 80m, 40m, 20m, 15m and the popular 10m bands. The design is an inverted "K" or "Fan dipole" style as shown in the pictures.Comet have really gone to town on the construction of this antenna, it is suitable for all locations, especially when it ca...

This simple, lightweight travel loop is quick to deploy and the perfect companion for Airspy and similar SDR radios!Most of the problems were related to ineffective RX antennas that were too sensitive to the surrounding noise. So Airspy designed a new Noise Cancelling Passive Loop (NCPL) to fix the ...

The Scanmaster SW2 is designed for portable or fixed station use. It has very wide coverage, is simple to install and plugs straight into your receiver.The Scanmaster SW2 is really 2 aerials in 1, VHF/UHF SW HF and these can be used together or separately.Specifications:- Scanmaster SW2 VHF/UHF/SW/H...

A very handy active HF receive-only antenna, ideal for installation in a confined space, or ideal for marine application.The antenna is approximately 18" long, fibreglass construction, and complete with all necessary leads , you just needs a 12v supply.Features:- Length of antenna cable: approximately 7m- Frequency range: approximately 1-30MHz- Amplifier gain: 20dB from approximately 680kHz-30MHz

The Sigma Plus Kit is an Upgrade kit to extend the options on your X80 and HF360 antenna. The upgrade kit enhances the 40m and 80m bands with its low angle of radiation in some circumstances , which makes the difference between White noise.INSTALLATION INSTRUCTIONS- Please mount the bracket for the ...

Comet CBL-1000 - High Power 1.0 KiloWatt 1:1 BalunThe CBL 1000 is a newly designed high-power model, rated up to 1KiloWatt with an HF frequency range of 1.7-30 MHz. The output connector is the usual SO239 socket. Comet have re-designed this balun from the old CBL30 mode which it replaces, and it has...

Features, Functions and SpecificationsThe DELTA 80-HP-QRO is a Full Wave Loop designed to operate on 80 m (3.5 MHz), 40 m (7 MHz), and 20 m (14 MHz) without an ATU and other bands with an ATU. There is a 4:1 balun at the feed point enabling it to be fed directly with 50 ohm Coax.The Loop comes compl...

Features, Functions and SpecificationsThe DELTA 10-HP is a Full Wave Loop designed to operate on 10 m (28 MHz) without an ATU and other bands with an ATU. There is a 4:1 balun at the feedpoint enabling it to be fed directly with 50 ohm Coax.The Loop comes complete with Three Insulations to provide a...

This SpiderBeam Model 404-UL is an ultra lightweight premium asymmetrical dipole for operation on up to 8 HF bands.Top Choice for: antenna restricted neighbourhoods, Campers , Hikers , Bikers , SOTA , POTA and Emergency Communications and many more.It is constructed using very light, yet strong comp...

The half size G5RV is a HF amateur band receive and transmit antenna covering the 40 metre to 10 metre bands. It's overall length is 51 feet and should be fed with good quality 50 ohm coax (Recommended feed length 45 or 90 feet).The ribbon cable should hang downwards and forms part of the radiating ...

Premium High quality genuine FLEX-WEAVE PVC coated multi-stranded copper wire. It's easy to use, can be soldered and extremely strong. Suitable for all antenna constructions and due to clear covering will not tarnishKey Features/Specifications:- Original high quality PVC covered FLEX-WEAVE copper wire- Length: 100 metres- Gauge: 4.0mm Diameter

These Techoman ready-made shortwave receive wire antennas are purpose-built for quick and easy deployment to give your shortwave radio or SDR receiver a performance boost.. Great for listening either at home or when on adventures.Made from durable stranded copper cable, these antennas are lightweigh...

Plastic screw in insulator, ideal for attaching the end of a HF antenna to a wooden pole, tree trunk or branch, corner of a building or similar.

Comet CBL-2500 - New High Power 2.5 KiloWatt 1:1 BalunThis new model in the Comet range, the CBL-2500 replaces the CBL-2000. Comet has strengthened the case on this range of baluns, with high power, very hard and durable construction should provide many years of service! The CBL2500 handles up to 2....