Techoman Electronics 1 views   1 clicks Claim this Business♡

A radio frequency dummy loads are used to simulate a 50 ohm radio antenna load for testing purposes. In radio a dummy antenna is connected to the output of a radio transmitter and electrically simulates an antenna to allow the transmitter to be adjusted and tested without radiating radio waves.These...

2x (Pair) P6100 100MHz Oscilloscope ProbesIdeal replacement or additional probes for your oscilloscope. Ideal or oscilloscopes up to 100MHz, such as: Hantek, Siglent, Rigol, Bat Tech, Agilent, Tektronix, Keysight, Fluke,Specifications:Bandwidth: DC-100MHzInput Capacitance: 1X: 70pF-120pF; 10X: 13pF-...

1x Pair Universal Probe Test Leads for Digital Multimeter Meter 10AFeatures:Compatible with universal multimetersMaximum current: 10ATest voltage range: 1000V MaxCable length : 90cm approxPackage:1x Pair Universal Needle Tip Probe Test Leads (as pictured)

Hantek 6022BE 20MHz USB Oscilloscope with 2x Probes, Probe Hooks and USB Cable This is an excellent oscilloscope with many features of a high end oscilloscope without the high cost! Comes with USB cable, 2 oscilloscope probes, disk containing the instruction manual, drivers and PC software.Ideal tes...

Hantek HT311 Oscilloscope BNC to 4 mm AdapterBNC plug to 2x 4mm (banana) terminals adaptor,Specifications:BNC Impedance: 50ΩMaximum Voltage: 500VPackage:1x HT311 as pictured

The Nissei RS-502 Wide-band SWR Meter and Watt Meter allows the SWR measurement for HF and VHF-UHF frequencies continuous from 1.8 to 525 MHz and power up to 200 Watts maximum.The Nissei RS-502 Analog RF Transmitter Measurement Meter includes a large, easy to read meter with back light , 3-function ...

The Nissei DG-503 works in the 1.6 to 60 MHz and 125 to 525 MHz bands, measuring from 1 to 200 Watts with measurements displayed simultaneously on the large 3.5-inch backlit display - direct power, reflected power and VSWR of analog signals. The DG-503 is not intended for use with pulsed digital, DM...

Soft rubber covered nickel plated 4mm non-solder type banana plugs - pair (1x red 1x black)Package:1x Pair Stackable Banana Plugs

Soft rubber soft rubber covered 44mm Crocodile / Aligator Clips - pair (1x red 1x black)Package:1x Pair 44mm Crocodile / Aligator Clips

The SWR-300 is designed to measure the transmission power and the standing-wave ratio of radios that operate in the frequency range of 120-500MHz. The Moonraker SWR-300 is a compact dual-function test meter to indicate the condition of any antenna system and transmitter with an impedance of 50 Ohms....

This is the brilliant MRP-2000 Mk2 wideband pre-amplifier for scanners or receivers It covers 25-2000MHz with up to 20dB gain, comes complete with a fly lead & just requires a 9V battery for immediate useBoost the power of your scanner & hear those long distance signalsKey Features/Specifications:- ...

Our Technician multimeters are highly versatile with a wide range of features suitable for multiple applications. They are highly accurate and come with a Lifetime Warranty for added peace of mind.This is a great multimeter, with the accuracy of true RMS measurement. Ruggedly designed for heavy-duty...

A radio frequency dummy loads are used to simulate a 50 ohm radio antenna load for testing purposes. In radio a dummy antenna is connected to the output of a radio transmitter and electrically simulates an antenna to allow the transmitter to be adjusted and tested without radiating radio waves.These...

SWR and Power indicators are installed in one meter unit. One scale will be indicated at the crossing point of the 2 needles. This unique feature makes it possible to read all of Forward Power, Reflected Power and SWR at the same time.Specifications:- Cross Needle SWR and Power Meter- Frequency: 900...

SWR and Power indicators are installed in one meter unit. One scale will be indicated at the crossing point of the 2 needles. This unique feature makes it possible to read all of Forward Power, Reflected Power and SWR at the same time.Specifications: - Cross Needle SWR and Power Meter- Frequency: 14...

SWR and Power indicators are installed in one meter unit. One scale will be indicated at the crossing point of the 2 needles. This unique feature makes it possible to read all of Forward Power, Reflected Power and SWR at the same time.Specifications: - Cross Needle SWR and Power Meter- Frequency Ran...

SWR and Power indicators are installed in one meter unit. One scale will be indicated at the crossing point of the 2 needles. This unique feature makes it possible to read all of Forward Power, Reflected Power and SWR at the same time.Specifications: - Frequency: 140〜525MHz- Power Range: 20/200W- ...

SWR and Power indicators are installed in one meter unit. One scale will be indicated at the crossing point of the 2 needles. This unique feature makes it possible to read all of Forward Power, Reflected Power and SWR at the same time.Specifications: - Frequency: 1.8〜200MHz- Power Range: 30/300/30...

SWR and Power indicators are installed in one meter unit. One scale will be indicated at the crossing point of the 2 needles. This unique feature makes it possible to read all of Forward Power, Reflected Power and SWR at the same time.Specifications: - Frequency: 140 - 525 MHz- Power Range: 20W/200W...

SWR and Power indicators are installed in one meter unit.One scale will be indicated at the crossing point of the 2 needles. This unique feature makes it possible to read all of Forward Power, Reflected Power and SWR at the same time.Specifications: - Frequency: 1.8〜150MHz- Power Range: 15/150/150...

SWR and Power indicators are installed in one meter unit. One scale will be indicated at the crossing point of the 2 needles. This unique feature makes it possible to read all of Forward Power, Reflected Power and SWR at the same time.Specifications: - Frequency: 1.8〜150MHz- Power Range: 20/200/20...

10MHzIdeal for connecting to your oscilloscope to measure higher voltage fuel injector and primary ignition wave forms. Great for protecting your oscilloscope from over-voltage inputs when measuring amplifiers and voltages above the input range of your oscilloscope.As an example: if measuring a 20V ...

MiNi1300 HF/VHF/UHF Antenna Analyzer 0.1-1300MHz with 4.3" TFT LCD Touch Screen Aluminum Alloy Shell Easily check and tune any antenna from 0.1-1300MHz with this rugged easy-to-use complete antenna and cable test unit. No more lugging bulky, expensive test equipment to remote antenna sites and hard ...

A radio frequency dummy loads are used to simulate a 50 ohm radio antenna load for testing purposes. Ideal for VNA calibration or very low power transmitter testing of the output of a radio transmitter and electrically simulates an antenna to allow the transmitter to be adjusted and tested without r...