SplashDrone 4 GC3-T Waterproof 3-Axis Thermal Camera
Swellpro's waterproof 3 axis thermal camera combines both a high resolution thermal infrared camera and a full HD low-light camera with a dimmable LED flashlight, which can provide both infrared and visible light imaging simultaneously.
Designed to fit quickly and easily to the Splashdrone 4.
Use the thermal imaging to identify objects of interest, then quickly switch to the low-light mode to better identify the object with more detail. The integration of the GC3-T with the SD4 empowers lots of industries to accomplish their missions smarter and faster with far less risk and cost.
The aerial thermal imaging can help firefighters see through smoke and farmers monitor crop health from above, or to assist in search and rescue operations.
View & Download GC3-T Manual As A PDF Document
SPEC SHEET 3Axis Thermal Gimbal Camera GC3-T Waterproof： IP67 Axis： 3 axis(pitch,roll,yaw) Pitching angle： -90°to 0° Maximum control speed: Pitching 60°/s Weight： Approx. 450g Size： 110 100 115mm Low Light Camera Image Sensor: 1/2" 12M Starlight CMOS Lens: FOV: 66° Burst： Shut/3/5/10pcs Interval Shut/1/3/5/10s Video Resolution: FHD: 1920 1080 30/60p - HD: 1280 720 120/60p Max Video Stream: 64Mbps Picture Format: JPEG Video Format: MP4 / MOV Support Memory Card: Micro SD CARDS with a maximum capacity of 128GB, write speed ≥15 MB/s, and transmission speed of Class 10 or above or UHS-1 rating are supported Working temperature： -10℃ to 40℃ IR Camera Image Sensor: Vanadium oxide uncooled infrared focal plane detector Lens: 19mm/25mm Resolution@frame rate: 640 512 @30p/48p/50p Palette: White hot / black hot / Rainbow / Rainbow high contrast / iron red / lava / Sky / medium gray / grey red / purple orange / Special 1 / warning red / ice fire / cyan red / special 2 / gradient red / gradient green / gradient blue / warning green / warning blue Crosshairs： Show (default), hide, move contrast ratio： Slider adjustment (0-255), default middle value Brightness: Slider adjustment (0-511), default middle value DDE gear (image enhancement): Off / On (default on) Temperature measurement OSD on / off: Off / On (the default displays the highest, lowest, and center point temperatures) Temperature measurement unit： Centigrade, Kelvin, Fahrenheit Temperature measurement alarm： Off, low temperature alarm, high temperature alarm, high and low temperature alarm Low temperature alarm setting: -20℃～ 150℃ High temperature alarm setting: -20℃～ 150℃ VIDEO