Techstyle 10 views   9 clicks ♡

The receiver (decoder) of the Pulse-Eight OneIP AV-over-IP system. It pulls an UltraHD 4K stream (18Gbps, HDR) off a standard 1GbE managed network and outputs HDMI to a display, with built-in scaling per screen and the visually-lossless, ultra-low-latency TicoXS codec. Add as many receivers as you h...

The transmitter (encoder) of the Pulse-Eight OneIP AV-over-IP system. It encodes an UltraHD 4K HDMI 2.0 source (18Gbps, HDR) onto a standard 1GbE managed network using the visually-lossless, ultra-low-latency TicoXS codec, extending up to 100 m over a single category cable and feeding any number of...

The Pulse-Eight OneIP is an ultra-low-latency, multicast AV-over-IP transceiver that distributes UltraHD 4K HDMI 2.0 video (18Gbps) with HDR over a standard 1GbE managed network. A single unit can act as a transmitter or a receiver, so the same hardware scales from a simple point-to-point extender t...

The fibre-ready version of the Pulse-Eight OneIP transceiver. Identical to the standard OneIP — an ultra-low-latency, multicast AV-over-IP transceiver distributing UltraHD 4K HDMI 2.0 (18Gbps) with HDR over a 1GbE network, configurable as a transmitter or receiver for point-to-point, splitter or m...

A 10-metre active optical HDMI cable that carries 4K UHD video over a thin, lightweight fibre core — ideal for long in-wall or conduit runs where a copper cable would not reliably pass high-bandwidth signals.

A 15-metre active optical HDMI cable that carries 4K UHD video over a thin, lightweight fibre core — ideal for long in-wall or conduit runs where a copper cable would not reliably pass high-bandwidth signals.

The ProAudio 16 is a 16-zone DSP pre-amp audio matrix that distributes up to 48 audio sources to 16 independent zones simultaneously. Every zone has its own 5-band parametric EQ, independent volume and gain, subwoofer crossover control and up to 170ms of lip-sync delay — all configured from the bu...

The ProAudio 1632 is a 32-zone DSP pre-amp audio matrix that distributes up to 40 audio sources to 32 independent zones simultaneously. Every zone has its own 5-band parametric EQ, independent volume and gain, subwoofer crossover control and up to 170ms of lip-sync delay — all configured from the...

The ProAudio 16 RS is a 16-zone DSP pre-amp audio matrix with Remote Source inputs — 8 of its 48 inputs accept audio extended over Cat5e/6, letting you place sources away from the rack. It distributes to 16 independent zones, each with 5-band EQ, independent volume and gain, subwoofer crossover co...

The ProAudio 32 is a 32-zone DSP pre-amp audio matrix that distributes up to 80 audio sources to 32 independent zones simultaneously. Every zone has its own 5-band parametric EQ, independent volume and gain, subwoofer crossover control and up to 170ms of lip-sync delay — all configured from the bu...

The ProAudio 3264 is the largest matrix in the range, distributing up to 80 audio sources to 48 analogue and 64 digital output zones simultaneously. Every zone has its own 5-band parametric EQ, independent volume and gain, subwoofer crossover control and up to 170ms of lip-sync delay — all configu...

The ProAudio 3248 is a 48-zone DSP pre-amp audio matrix that distributes up to 80 audio sources to 48 independent zones simultaneously. Every zone has its own 5-band parametric EQ, independent volume and gain, subwoofer crossover control and up to 170ms of lip-sync delay — all configured from the...

The ProAudio 8 is an 8-zone DSP pre-amp audio matrix that distributes up to 24 audio sources to 8 independent zones simultaneously. Every zone has its own 5-band parametric EQ, independent volume and gain, subwoofer crossover control and up to 170ms of lip-sync delay — all configured from the buil...

The ProAmp 8 is a versatile 8-zone Class D power amplifier delivering up to 100W per channel in a compact rack chassis — an all-in-one solution for both surround-sound and distributed-audio systems. Output zones are bridgeable for flexible power configurations, and full DSP with EQ and Dolby 5.1 s...

The receiver half of the Pulse-Eight neo:Ultra extender, sold individually for custom configurations or replacement. It receives full-bandwidth 18Gbps HDMI — up to 4K/60Hz 4:4:4 and HDR — over HDBaseT Class C DSC from a neo:Ultra transmitter at up to 100 m and outputs to a display. HDMI-CEC, bi-...

Distribute high speed HDMI® 2.0a and/or HDMI® 2.0b Ultra HD 4K, 4:4:4 (18Gbps) video to 2 outputs simultaneously.Automatic EDID management simplifies installation, automatically copying capabilities from output 1 display

The P8-HDMIDAC video scaler and digital audio converter (DAC) is designed to be placed between a display and a source device. It adjusts resolution and audio from an incoming HDMI source and scales the output to a level compatible with its display capabilities. This product is the ideal solution to...

The neo:lite Receiver supports 70m transmissions of 1080p@60Hz, Ultra HD 4K over 40m, HD audio, Power over HDBaseT (PoH) remote power from transmitter to receiver and bidirectional control via IR and RS232 all along a single Cat5e/6 cable.Note: requires a compatible HDBaseT transmitter to operate Wa...

neo:Lite HDMI Extender Set Extend 4K up to 40 Meters and 1080p to 70 Meters over Cat5e/6/7.Supports some HDMI 2.0a timings, including High Dynamic Range (HDR) with BT.709 colourspace, PoH (Power over HDBaseT) and bi-directional IR signalsKey Technologies:Using HDBaseT™ technology, this HDMI extens...

neo:Ultra HDMI Extender Set - shipping end of November 2017.Uncompromised video extensionExtend all HDMI 2.0 video formats, from 4K 4:4:4 8bit to 4K 60 HDR10 at 100 meters and with zero latency packaged in the thinnest format possible to solve solutions for the most demanding of clientsThe ultimate...

With our digital to analogue audio converter, audio setups are capable of decoding connected S/PDIF coaxial or TOSLINK optical digital audio sources to standard analogue stereo (L/R) audio. Stereo output signals can then be fed to external devices such as an amplifier, Hi-Fi, recording deck, or powe...

Delay stereo audio with a simple L/R phono input and output connection. Via the rotary dial selector, you can adjust the delay from 20ms to 340ms.An ideal problem solver to lip-sync issues when mounting ceiling speakers that are able to process audio faster than the video panel.• The perfect solut...