PAINT PLUS SCENIC FLAT DIGITAL SCREEN PAINT

PaintPlus Scenic Flat® Digital is a custom formulation for the scenic set artist. They have been specifically formulated to provide the necessary luminance values and colour saturation required for video keying effects.

Product features:

Self priming on most substrates

It dries to a flexible finish even when it is applied in thin coatings or highly diluted

The sheen levels of Scenic Flat® Digital are extremely low creating a very flat finish to minimise light reflection

It is virtually odourless making it easy to work with and kind on the environment

Typical areas of use:

Canvas

Concrete

Brick

Fabric

Paper faced wallboard

Polystyrene

Plywood

Pressed chip board

Wood

Colour and gloss:

Gloss level and – flat 2% @ 60 degrees

Colours – digital blue, digital green

Application schedule:

Drying and re-coat times are dependent on such factors as film thickness, atmospheric conditions, colour strength and dilution.

The general dry times are: Touch dry 20 minutes Re-coat time 30–60 minutes

Application is not recommended if the surface and/ or air temperature is less than 10˚C or is liable to fall below 10˚C during the drying period.

Application methods:

Good quality paint or cutting in brush

Medium nap roller – 14mm–16mm

Airless spray minimum 133 bars (2,000lb/sq in) Tip size 17thou

Safety:

Read label before use and keep out of reach of children.

If medical advice is needed: have product container or label at hand.

Wear protective clothing such as overalls, goggles and gloves and ventilate working areas.

Wash any paint deposits off skin.

If sanding wear face mask to avoid inhaling dust particles.

Environmental qualities:

Manufactured in a carbon neutral certified facility – ISO 14064-1 VOC 5-6 gms per litre EC07-13 Ecolabel certified – Environmental Choice EC07-13 Licence number 0703012