The Spa Shop 59 views   1 clicks Claim this Business♡

Hot Springs C30/Spa Systems Replacement Filter Cartridge.Has a flat top and bottom with a open hole at each end.Dimensions:Height: 265mm(end to end)Width:150mmHole ID: 50mm

SQ50 Replacement Cartridge Filter ElementHas an open hole at both ends.Used as a replacement element for Davey Spa-Quip SQ50 Skim Filters. Compatible with Trueform SpaFilter Dimensions:Length: 227mmDiameter: 143mmTop Hole ID: 53mmBottom Hole ID: 53mm

O2 Spas/Vortex 400 PureZone Filter Cartridge. FBD248Has a closed flat top and the bottom has a fine thread spigot.Filter Dimensions:Height: 210mm (not including spigot)Width: 127mmSpigot ID: 37mmThis cartridge is a micron fibre filter that has a finer filtration cycle nearly 10 times more then a normal filter cartridge.Unit is disposable and recommend to replace every 3-4 months.

Hot Spring Spas C65 Replacement Filter Cartridge.Has a flat top and bottom with a open hole at each end.Dimensions:Height: 268mm(end to end)Width: 215mmHole ID: 75mm.

Vortex O2 Spas Replacement Cartridge Filter ElementHas a closed top and a fine thread spigot on the bottom.Used as a replacement element for Vortex O2 Spas.Filter Dimensions:Length: 210mm (not including spigot)Diameter: 127mmSpigot ID: 36mmSpigot OD: 42mm

Rainbow Waterco Waterway 50sqft Replacement Cartridge Filter ElementHas an open hole at both ends.Used as a replacement element for Rainbow RDC, Waterco and Waterway Top Load Filters.Same dimensions as FC-FAA308 however has a higher pleat count.Filter Dimensions:Height: 339mmWidth: 126mmHole ID(top)...

Freeflow Spas 46 FilterWorks as a Freeflow Replacement FilterOutside Diameter: 132mmLength: 226mmTop Cap: Semi CircleBottom Cap:47mm MPT Thread

Universal Widemouth Replacement Cartridge Filter ElementHas a semi-circle handle on the top and a coarse thread spigot on the bottom.Filter Dimensions:Length: 205mm (not including handle and spigot)Diameter: 145mmSpigot ID: 36mmSpigot OD: 48mmUsed as a replacement element for:Sapphire SpasSignature SpasOasis SpasWaterways SpasTrueform Spas

Alpine Spas Replacement Cartridge Filter ElementHas a semi-circle handle at the top and a coarse thread spigot on the bottom.Used as a replacement element for the following Alpine Spa models:San Marino, Santorini, Monaco, Mont Blanc, Whistler, Blackburn, Makalu, Montana, Vermont, Summit, Matterhorn,...

Vortex Spas Cam Lock Replacement Cartridge Filter ElementHas a closed top and a cam lock fitting on the bottom.Used as a replacement element for Vortex Spas built after Aug 2016.Filter Dimensions:Length: 210mmDiameter: 125mmFitting ID: 95mmBottom Hole ID: 52mmPlease note due to manufacturing tolerances there may be a slight variation to the above measurements.

Vortex Spas Cam Lock Disposable Cartridge Filter ElementHas a closed top and a cam lock fitting on the bottom.Used as a disposable element for Vortex Spas built after Aug 2016. Replace every 3-4 months.Filter Dimensions:Length: 210mmDiameter: 125mmFitting ID: 95mmBottom Hole ID: 52mmPlease note due to manufacturing tolerances there may be a slight variation to the above measurements.

265 x 125mm Alpine Spas 20Check your dimension and the type of filter bottom carefully.Details: Suitable replacement filter for Alpine SpasFilter Dimensions:Outside Diameter: 125mmLength: 265mm54mm Hole (Both ends)Sold individually