Aussie Gold Vinyl Repair Kit

specially formulated to repair inflatables, vinyl pool liners and air mattresses. Patching can be done out of water or underwater.

The kit includes

- 2 strips of vinyl patch (approx 600mm x 135mm)
- glue (60ml)
- applicator wand Directions for use Cleaning the surface

Clean all surfaces to be patched thoroughly using a vinyl surface cleaner Cutting the patch

Cut the patch larger than the area to be patched. Cut the patch with rounded corners to prevent peeling. Apply the adhesive

Light gauge vinyl and inflatables: Apply the adhesive sparingly to the patch, covering it evenly all over.

Heavy gauge vinyl & pool liners: Apply the adhesive liberally to the patch, covering it evenly all over Applying the patch

Out of water: Apply the patch to cover damaged area ensuring you press out all air bubbles. If possible, apply weight to the patch and allow 24 hours to reach full bond strength.

Under water: Keep the patch folded onto itself over the area to be repaired, then unfold the patch and apply immediately. Carefully press out all air and water bubbles. Apply weight if possible and allow 24 hours to reach full bond strength. WARNING

Avoid breathing vapours. Avoid frequent or prolonged contact with skin.

Keep out of reach of children

Highly flammable. Keep away from naked flame. First Aid

If you experience difficulty in breathing, leave area to obtain fresh air. In case of eye contact, flush immediatly with plenty of water for 15 minutes and get medical attention; for skin, wash thoroughly with soap and water.