Thrash Garage 183 views Claim this Business♡

Here at Franklin Performance we take pride in only delivering the highest quality of parts.Unfortunately sometimes parts get scratch, dented, have missing or discoloured anodising and are unrepairable.In the past we have discarded these parts but we feel this is wasteful.While the parts may not ...

Here at Franklin Performance we take pride in only delivering the highest quality of parts.Unfortunately sometimes parts get scratch, dented, have missing or discoloured anodising and are unrepairable.In the past we have discarded these parts but we feel this is wasteful.While the parts may not ...

Fittings that suit our Mazda 12A & 13B electric water pump adaptors.Sizes:- 16AN to M34X1.5- 20AN to M34X1.5- 32mm tube to M34X1.5- 38mm tube to M34X1.5All fittings are supplied with an o-ring.Price is per one fitting.

Electric water pump adaptor to suit Mazda 12A, 13B and 20B rotary engines.CNC machined from billet 6061-T6 aluminium at our factory in Napier, New Zealand and then black anodised for corrosion resistance and great looks.Supplied with fasteners required and plug for the temperature sender port.The EW...

Save money by buying an electric water pump adaptor, and side mount alternator bracket together!-----------------------------------------------------------------------------------------------------------------------------------Franklin Engineering is proud to have designed and manufacture side mount...

These spacers are installed on the steering rack, spacing the rack end further out and allow the steering rack shaft to travel further inside the steering rack. This allows for an increase in steering lock resulting in more angle while drifting.This listing is for a pair of 5.5mm thick spacers.

A Head Oil Drain Kit is a product designed by Franklin Performance to help reduce excessive oil build-up in the cylinder head of Nissan RB twin cam series engines.Excessive oil build up is a common problem experienced on the drag strip, drift track and occasionally on the street.This kit helps drain...

Drills and tap required to install one of our Nissan RB Head Oil Drain Kits.Contains:- 6.5mm Centre Punch- 5.0mm Drill- M6 Spiral Fluted Tap

Kit for plumbing Franklin Performance's Nissan RB Head Oil Drain Fittings to a Nissan RB Engine.The kit includes: 1x 10AN 90deg hose end fitting1x 10AN 45deg hose end fitting1x 8AN O-Ring to 10AN adaptor1x 10AN Steel weld-on fitting for the sump1x 10AN Aluminium weld-on fitting for the sump1 metre of Black 10AN Braided Hose

Spare parts kit for Franklin Performance Nissan RB Head Oil Drain Fitting.Version 3 - this is for Head Drain Fittings purchased on or before 28-06-2022Version 4 - this is for Head Drain Fittings purchased on or after 29-06-2022Consists of:2pcs: O-Ring for Head Drain Fitting2pcs: M6 Cap Screws for Head Drain Fitting

A Head Oil Drain fitting is a part designed by Franklin Performance to help reduce excessive oil build-up in the cylinder head of Nissan RB twin cam series engines.Excessive oil build up is a common problem experienced on the drag strip, drift track and occasionally on the street.This fitting helps ...

This universal battery relocation kit contains everything you need to move your battery to your boot.When you need to move your battery for better weight distribution, intercooler piping clearance, or when you just want to get that professional look, pick one of these battery relocation kits.Kit inc...

Franklin Performance is proud to produce solid steering column bushes for a range of Nissan vehicles.This aluminium bush replaces the soft rubber bush in your skyline steering column.This removes a lot of play and backlash from the steering column and tightens up steering feel and response.Produced from billet 6061 aluminium and black anodised for great looks and corrosion resistance.

Oil orifice restrictors for Nissan RB engines.When building an RB20, RB25, RB26 or RB30 engine it is common practice to restrict the amount of oil flowing to the head of the engine to prevent excess oil in the head.Sizes available:- 0.9mm- 1.0mm- 1.1mm- 1.25mm- 1.3mm- 1.5mm- 0mm (blanking plug)Pleas...

This part enables you to fine tune the inlet cam timing on a Nissan RB25DE or RB25DET engine with VCT, commonly found in R33 and R34 Skyline vehicles.The standard VCT Inlet cam gear is built with slotted adjustments but must be removed to access the adjustment bolts, a major job.With this plate inst...

Drills and tap required to install one of our Nissan RB30DET VCT Oil Feed Kits.Contains:- 8.3mm Drill- 1/16" NPT Tap- 1/8" NPT Tap

Franklin Performance is proud to manufacture and supply a special purpose oil feed kit for RB25 VCT heads when used as part of an RB30DE or RB30DET build.The kit provides an oil feed to the #1 cam journal and to the VCT actuator used to activate the variable cam timing of the intake cam. Taking adva...

Billet aluminium oil restrictor designed to fit in the end of a male 3AN or 4AN fitting to restrict oil flow to a turbo or similar application.Available with 0.5mm, 1.0mm, 1.4mm or 2.00mm holeNZ Made CNC Machined quality. It is recommended to check with a turbo manufacturer or other qualified person...

Our T Turbo Oil Feed Kit is the ideal solution for converting a naturally aspirated Nissan RB, SR, or CA engine to turbocharged. It provides a reliable oil supply to the turbocharger using a clean, factory-style installation – no need to hunt for OEM turbo parts or modify existing fittings.Kit Fea...

Here at Franklin Performance we take pride in only delivering the highest quality of parts.Unfortunately sometimes parts get scratch, dented, have missing or discoloured anodising and are unrepairable.In the past we have discarded these parts but we feel this is wasteful.While the parts may not look...

Here at Franklin Performance we take pride in only delivering the highest quality of parts.Unfortunately sometimes parts get scratch, dented, have missing or discoloured anodising and are unrepairable.In the past we have discarded these parts but we feel this is wasteful.While the parts may not look...

Here at Franklin Performance we take pride in only delivering the highest quality of parts.Unfortunately sometimes parts get scratch, dented, have missing or discoloured anodising and are unrepairable.In the past we have discarded these parts but we feel this is wasteful.While the parts may not look...

Here at Franklin Performance we take pride in only delivering the highest quality of parts.Unfortunately sometimes parts get scratch, dented, have missing or discoloured anodising and are unrepairable.In the past we have discarded these parts but we feel this is wasteful.While the parts may not look...

The Davies Craig Electric Water Pump (EWP) Mounting Bracket can be used with the EWP115, EWP140 & EWP150 both Nylon and Alloy versions.It offers greater flexibility and assists with the hard mounting of the EWP to the engine bay by providing a rubber dampener to minimise vibration damage. KIT CONTEN...