Thrash Garage 183 views Claim this Business♡

Replace your old worn factory shifter bushing and you will drastically improve the feel of your shifter.- Light weight aluminium bronze construction- Direct replacement of your plastic factory itemVehicle Compatibility:- Nissan Silvia S15 SR20DET 6 Speed- Nissan Skyline R32 GTR- Nissan Skyline R33 GTR

The GKTECH diff bushes are a direct replacement of the standard items and ensure that movement of the diff is kept to a minimum within the subframe which is quite common under hard driving conditions. - CNC Machined from 6061-T6 aluminium- 6 Piece Set Vehicle Compatibility:- Nissan S14 200SX- Nissan...

The GKTECH S/R Chassis to 350z/370z Diff conversion bushes allow you to bolt in the stronger 350z/370z/G35/G37 differential to your 2 bolt R200 S14/S15/R33/R34 subframe.The bushes are CNC Machined from 6061-T6 aluminium and require no further modification to the subframe, just simply press the two b...

The Gktech solid subframe bushes are a direct replacement of the standard items and ensure that movement of the subframe is kept to a minimum. They eliminate axle tramp whilst also raising the subframe 15mm which helps to correct the roll center on lowered vehicles. - CNC Machined from 6061-T6 alumi...

The GKTECH Solid Aluminium Steering Rack Bushes are a direct replacement of the OEM rubber bushes. Steering racks on cars that are driven hard see high loads and the rubber bushes are just not up to the task. These aluminium bushes leave no margin for play and are CNC machined from billet aluminium....

The GKTECH alloy steering shaft bush will increase your steering response. The feedback that the stock steering rack provides to the driver can sometimes be a bit unpredictable, but with this product response is transferred all the time. A must for the serious driver, both street and track. - Direct...

The GKTECH solid gearbox mount is a direct replacement of the standard item and drastically increases the feel of the gearbox. - CNC Machined from 6061-T6 billet aluminium and anodized black- Includes all fittings required for a direct install- Fits the Gktech Z33 350z/ Z34 370z Crossmember with sli...

The GKTECH solid subframe conversion bushes are a direct replacement of the standard items and allow you to fit an S14/S15 rear subframe in your S13/180sx, aswell as R33/R34 rear subframe in your R32.The solid bushes also ensure that movement of the subframe is kept to a minimum. They eliminate axle...

The GKTECH S/R chassis diff brace for 350z/370z diff conversion provides additional support to the diff resulting in reduced wheel hop under hard driving conditions. The OEM diff cover uses just a single bush and stud which is prone to premature wear and excessive movement which can cause the rear s...

The GKTECH diff brace provides additional support to the diff in your 350z or V35 Skyline resulting in reduced wheel hop under hard driving conditions. The OEM diff cover uses just a single bush and stud which is prone to premature wear and excessive movement which can cause the rear stud to break o...

The GKTECH 350z/V35 Skyline front compression rod bearing replacements are designed to replace the factory OEM rubber bush. We have chosen to use a common (COM16T) spherical bearing which is PTFE lined and self lubricating for increased longevity and to increase the misalignment we have produced hig...

The GKTECH 350z/V35 Skyline front lower arm inner spherical bearing replacements are designed to replace the factory OEM rubber bush which needs regular replacement. The OEM front lower arm pivots a significant amount throughout suspension travel which causes premature wear. We have chosen to use a ...

The GKTECH 350z/V35 Skyline front lower arm strut mount bearing replacements are designed to replace the factory OEM rubber bush. We have chosen to use a common (COM10T) spherical bearing which is PTFE lined and self lubricating for increased longevity. Simply press out the OEM bush and press the re...

The GKTECH Solid Aluminium Steering Rack Bushes are a direct replacement of the OEM rubber bushes. The OEM rubber bushes are prone to high loads, especially on a track/ drift car. Our aluminium bushes leave no margin for play and are CNC machined from billet aluminium and replace all the bushes in t...

The GKTECH RB25 solid engine mounts are a direct replacement of the standard item and help reduce engine movement and get power to the ground. Particularly useful in a drift car where the car is off and on the throttle.- CNC machined aluminium- Sold as a PAIR Vehicle Compatibility:- Nissan Skyline R...

The GKTECH RB20 solid engine mounts are a direct replacement of the standard item and help reduce engine movement and get power to the ground. Particularly useful in a drift car where the car is off and on the throttle.- CNC machined aluminium- Sold as a PAIR Vehicle Compatibility:- Nissan Skyline R...

Please allow 1-2 weeks for these items to be dispatched A combined 8 years of product development and over 1,000 pairs sold we bring to you the V2 S/R/Z32 chassis rear knuckles. We have developed a lightweight yet strong drop knuckle. They come with dual caliper brackets as standard, high-quality P...

Want to reduce bush deflection and change out your tired OEM FLCA (front lower control arm) bushes? We have the solution. We have made replacements, however, they are a spherical bushing rather then a polyurethane or rubber bushing to significanty reduce bush deflection and ensure a much smoother op...

Want to reduce bush deflection and change out your tired OEM rear LCA bushes? Well, we have made replacements, however, they are a spherical bushing rather then a polyurethane or rubber bushing to significanty reduce bush deflection and ensure a much smoother operation throughout the range of suspen...

The GKTECH Polyurethane diff bushes are a direct replacement of the standard items and ensure that movement of the diff is kept to a minimum within the subframe which is quite common under hard driving conditions. - Polyurethane 80sHA construction- Available to order as front, rear or front and rear...

The GKTECH Z33 350z/Z34 370z OEM rear upper camber arm spherical upgrade bearing replacements are designed to replace the factory OEM rubber bush.We have chosen to use a common (COM10T) spherical bearing which is PTFE lined and self lubricating for increased longevity and to increase the misalignmen...

The GKTECH solid subframe bushes are a direct replacement of the standard items and ensure that movement of the subframe is kept to a minimum. They eliminate axle tramp whilst also raising the subframe up to 10mm which helps to correct the roll center on lowered vehicles. We also supply shims to kee...

The GKTECH diff bushes are a direct replacement of the standard items and ensure that movement of the diff is kept to a minimum within the subframe which is quite common under hard driving conditions. Vehicle Compatibility:- Nissan Z33 350z- Nissan V35 Skyline

The GKTECH diff bushes are a direct replacement of the standard items and ensure that movement of the diff is kept to a minimum within the subframe which is quite common under hard driving conditions. Vehicle Compatibility:RZ34 ZV35 SKYLINEV36 SKYLINEZ33 350ZZ34 370Z