Timaru Yamaha 182 views ♡

For large Harley's and customised motorcycles this powerful lift is designed with a minimum height of 9 cm making it easier to wheel the bike onto the bench. Suits bike up to 500 kg.Specifications:Maximum load capacity: 500 kgMaximum height: 100 cmMinimum height: 9 cmTabletop dimension: 220 x 80 cmO...

Replacement Damper set for DRC HC2 STAND TWIN-ARM (DFD3638311)

This is a simple wheel balancing, truing and bearing check kit. Light weight and compact design. Can be used on all motorcycle wheels.Specifications:- 10mm shaft set for wheel bearings with inner diameters from 10mm to 15mm.- Works with DRC GYRO STAND 2 (SKU: DFD3652130)

SPECIFICATIONS:- Height adjustable stand for dirt bikes.- Top plate is height-adjustable to fit under most dirt bikes.- Easily operated durable double long-levered jack-pedal.- Easy "Safety Hold Hook" system prevents any accidents.- Set after you lift up your bike.- Durable top plate, base frame, and main shaft design.- Maximum lifting weight is 150kg. (330 lbs)

A folding stand that makes it easy to adjust wheel runout, balance, and check bearings all with one unit. It is useful not only for maintenance of laced wheels, but also for restoring old bikes and reassembling/lacing rims.Specifications:- Rim sizes up to 23 inches and rim widths up to 5 inches can ...

SPECIFICATIONS:- Height adjustable stand for dirt bikes.- Top plate is height-adjustable to fit under most dirt bikes.- Easily operated durable double long-levered jack-pedal.- Easy "Safety Hold Hook" system prevents any accidents.- Set after you lift up your bike.- Durable top plate, base frame, and main shaft design.- Maximum lifting weight is 150kg. (330 lbs)

Foot peg stand - racingMinimum height 44.5 cmMaximum height 49 cm

Wheel balancer adapter set - BMW 1200

Wheel balancer adapter set - BMW '06

Wheel balancer adapter set - BMW

This extension kit will turn your AG-756, or AS-756 lift into a 3-wheeler capable lift. Perfect for the Can Am Spyder range.

Extentions wings for ATV to suit M-504 and MG-504 lifts. Drop panel in the middle to allow easier access once bike is on the lift.Can also be made to fit the current MAX 516 GATE lift, by drilling new mounting holes.Pictures show extension wings on the lift. Lift avalable seperately.

Side extension wings for bench lifts for ATVSW516 - suits M516 / MG516 modelsSW756 - suits AG756 model

The Absolute 756 is the top of the range. It is the most versatile lift with a maximum loading capcity of 750 kg and a maximum lifting height of 130 cm , allowing it to be used for any kind of motorcycle. The gate version is equipped with a drop gate panel to enable the user to easily remove the rea...

The most versatile lift in the range as it can be used for any kind of motorcycle. The split version is equipped with a pivoting table top end to enable the user to easily remove the front forks as well as the usual sliding gate panel at the rear. Electro-hydraulic pump.Specifications:Maximum load c...

Centre stand for sports bikes. Mounts via a pin through the swingarm pivot to allow quick removal of shock absorbers and wheels. Ideal to store the bike during winter months.This stand is perfect for the Honda VFR 1200. Comes with your choice of the following pins:- BL CSUP - universal pin- BL CSVFR - Pin Honda VFR1200Maximum capactiy 400kg.

The ultimate dedicated quad or ride-on mower service lift. It has two elevating and tiliting platforms that can raise up to 100 cm in the front end and up to 155 cm in the rear end making it much easier to access the lower part of the vehicle.Specifications:Max load capacity: 500kg lift capacityMaxi...

Custom liftSupports up to 500kg. Equipped with castor wheels, it allows for easy movement of the vehicle in the workshop or garage.SpecificationsWidth: 38 cmMax capacity: 500 kgAction: Foot pumpMax height: 45 cmMin height: 8 cmSafety positions: 3If you can't find what you're looking for, check out the Bike Lift catalogue. We can supply most items. for more information.

FS-10 Universal front adjustable stand. Fits under forks using sliding adaptors. 33 cm high. Available with your choice of the following adaptors:- SAC-10 Set of hard plastic universal cone adapters fork use. Fits all bikes with openings under forks- SAC/Y-10 Set of con adapters for R1-R6 for off-li...

Electronic wheel balancer for motorcycles. Compact machine with small dimensions, ideal for tight workspaces. Made in Italy.Features:- Hand spin of the wheel- Manual acquisition of wheel data- Mechanical pedal brake- The machine is supplied with power supply (AC) and cable for supply (12-24V DC)- Mo...

Automatic tyre changer, designed to mount and demount tyres for motorcycle, moped, ATV , Go-kart and turf maintenance vehicles. With a traditional bead breaking system and self-centering turntable it can accommodate rims from 6" to 26" as supplied. Made in Italy.Specifications:- Power supply - 230 V...

Rear Paddock Stand - Single Sided SwingarmR&G Rear Paddock Stand suitable for bikes with a left-hand or right-hand single sided swing arm. Specially designed pin adapters, sold separately, make it compatible with your bike.Made from high quality FE360 tubular steel and powder coated black for a supe...

ELEVATOR BIKE STAND- Steel constructed Lift-Stand with an additional damper to slow the period of descent when lowering.- Rubber upper deck with adjustable height to adapt to most full-size off-road dirt-bikes as well as youth/mini bikes.- Rotating upper deck to allow movement of the bike during mai...

Paddock Stand Bobbins by R&G.These anodised aluminium paddock stand bobbins speak for themselves. They allow you to raise the rear of your bike on a paddock stand. Supplied in pairs.Please carefully check your bike to ensure the Paddock Stand/Cotton Reel mounts are the correct size before purchasing.See more at: http://www.rg-racing.com