Timber And Light 74 views Claim this Business♡

Extra long mounting bracket that can accomodate distances greater than 700mm between studs.

We can cut out a radius notch as per photo to go into the back of your solid timber Desktop or Alcove Desk where cables for the monitor and come up through. 100mm long and 50mm deep.

If one or more of the Slimline shelf mounting holes will be attached to gib only you will need these specifically designed Timber & Light 'Gib-only Pins'. The Snap Toggle is inserted into the wall and then pin is screwed into place. Please see our instructions on the Installation page.

If you are only able to attach the wall mounting bracket to one stud, you will require at least one 'Gib-only Screw'. These are the famous Heavy Duty Snap Toggle which comes with an M5 bolt and washer to suit the wall mounting bracket.

Have your own timber? Then just grab one of our ultra lightweight, ultra strong, alloy wall mounting brackets. Comes in 2 sizes. 500mm 2 pin and 700mm 3 pin. Standard pin length is 150mm, can increase to 200mm on request.

Stud screw mount for our Slimline Range. All Slimline shelves come with enough Stud Screws. Please if you require more.Note: please ensure you drill a 6mm hole prior to screwing into timber. Failure to drill an adequate diameter hole could cause the screw to snap while screwing into the stud.

A Tongue and Groove design to provide additional support and perfect alignment for two shelves meeting in the corner. Add one Corner Support for each pair of corner shelves.

Add an LED strip lighting groove to any shelf.Add in Custom Field above the position of your groove in the shelf and the depth and the width of the groove. Please note we only provide a route/groove, we do not provide the actual LED strip light.Cost is $75 per meter, so add to match the length of shelf you have purchased, Quantity is in 0.1m.

Add x2 for any shelf you would like round corners or x1 if the shelf only needs one corner.First two photos show a small radius/corner and the third photo shows a larger radius. Generally modern interiors suit the smaller corner and traditional interiors suit the larger corner.

Our alloy heat protector if you are wanting to mount your floating shelf above a heat source.PRICE IS PER 100MM IN LENGTH

By default, all shelves will be natural (no finish applied) but we can apply any of the above stains or a beautiful clear coat for an additional cost depending on the shelf size. Just select size of shelf when adding the finish option to your cart.What do we use to finish the shelves you ask?The bla...

Our alloy heat protector if you are wanting to mount your floating shelf above a heat source. PRICE IS PER 100MM IN LENGTH

If one or more of the Slimline shelf mounting holes will be attached to gib only you will need these specifically designed Timber & Light 'Gib-only Pins'. The Snap Toggle is inserted into the wall and then pin is screwed into place. Please see our instructions on the Installation page.

If you are only able to attach the wall mounting bracket to one stud, you will require at least one 'Gib-only Screw'. These are the famous Heavy Duty Snap Toggle which comes with an M5 bolt and washer to suit the wall mounting bracket.

Have your own timber? Then just grab one of our ultra lightweight, ultra strong, alloy wall mounting brackets. Comes in 2 sizes. 500mm 2 pin and 700mm 3 pin. Standard pin length is 150mm, can increase to 200mm on request.

Stud screw mount for our Slimline Range. All Slimline shelves come with enough Stud Screws. Please if you require more.Note: please ensure you drill a 6mm hole prior to screwing into timber. Failure to drill an adequate diameter hole could cause the screw to snap while screwing into the stud.

A Tongue and Groove design to provide additional support and perfect alignment for two shelves meeting in the corner. Add quantity to match the number of shelves that will be placed in a corner.

Add an LED strip lighting groove to any shelf. Add in notes during checkout the position of your groove, the depth and the width. Please note we only provide a route/groove, we do not provide the actual LED strip light. Cost is $75 per meter, so add to match the length of shelf you have purchased, Quantity is in 0.1m.

Add x2 for any shelf you would like round corners.