Large Teardrop Cutter

RS213C
Large Teardrop is a standard cutter for RS213 Articulated Probe and can also be fitted to the RS200KT Multi tip.

For those who like to design and make special hollowing tools, the bits are drilled to take M5 screws.

SHARPENING

We find that the flat cutters are best ground at 10° to 15° to give the best cut.For shear scraping, the burr created is a vital edge and can be restored by rubbing the edge firmly with a Crown Burnisher or similar hard steel.After doing this three or four times is best to take the tool back to the grinder to restore the clean burr.Cutters 6 and 7 are used for hollowing or detail work and are best held in the Cutter Holder and sharpened to 10° to 15°.

Sharpening is best achieved on a Woodcut stem Sharpener

Use with Robert Sorby :Kelton:Woodcut Proform:Rolly Munroe and you will find it easy to remove all thise tool ridges inside a Vas eor Hollow form

Sharpen as you would a skew from both sides and you will never have a di...