Turbo Care NZ 1 views Claim this Business♡

At Turbo Care, we leverage over 40 years of specialised experience in the New Zealand turbo industry to support every turbo we sell.Our commitment to excellence includes providing comprehensive technical advice and exceptional after-sales service.Give us a call. Our team are here to assist you every...

All turbochargers are supported with over 40 years specialised experience in the industry- 100% bolt in turbo- 51mm machined from solid compressor wheel 6 6 design- 56mm turbine wheel- D5S cast exhaust housing- Adjustable billet actuator- Upgraded thrust kit- Comes complete with all new gaskets, stu...

All turbochargers are supported with over 40 years specialised experience in the industry- 100% bolt in turbo- 48mm machined from solid compressor wheel 6 6 design- Dual ceramic ball bearing- 9 blade inconel turbine wheel RX6 design- D5S cast exhaust housing- Adjustable billet actuator- Comes comple...

All turbochargers are supported with over 40 years specialised experience in the industry- Capable of supporting up to 1450hp- 80mm machined from solid 7 7 compressor wheel- 5" anti-surge compressor inlet- 4" v-band compressor outlet- CNC machined cover- 1.32 A/R v-band inlet/out turbine housing- 96...

All turbochargers are supported with over 40 years specialised experience in the industry- Designed to replace the factory 17201-17040 Turbo- 51mm 10 blade machined from solid compressor wheel- CNC machined compressor cover- VSR balanced- Proven to support 200-230hp- Turbo is new outright no exchang...

- Dual ceramic ball bearing CHRA- 51mm 7 7 machined from solid compressor wheel- 56mm inconel turbine wheel incorporating out new RX6 design- 3" anti-surge compressor inlet- CNC machined compressor cover- T25 8cm wastegated turbine housing- 11.5psi Garrett actuator fitted- Water-cooled bearing housi...

At Turbo Care, we leverage over 40 years of specialised experience in the New Zealand turbo industry to support every turbo we sell.Our commitment to excellence includes providing comprehensive technical advice and exceptional after-sales service.Give us a call. Our team are here to assist you every...

All turbochargers are supported with over 40 years specialised experience in the industry- 100% bolt in upgrade to replace the stock VB43- Dual ceramic ball bearing CHRA machined into the stock housings- Adapter plates supplied which allows you to run all the factory oil line, water lines- 51mm 7 7 ...

All turbochargers are supported with over 40 years specialised experience in the industry- Dual Ceramic ball bearing- 61mm machined from solid 11 blade compressor wheel- 67mm 713C Inconel turbine wheel- 4" anti-surge inlet with 2.5" compressor outlet- Water-cooled bearing housing with blanking bungs...

All turbochargers are supported with over 40 years specialised experience in the industry- 100% direct bolt in turbo- 43.50mm 6 6 extended tip machined from solid compressor wheel- CNC machined compressor cover- VSR balanced- Flow-bench report supplied- Turbo will support 200-250hp with supporting m...

All turbochargers are supported with over 40 years specialised experience in the industry- 100% bolt in turbo- 42mm machined from solid 11 blade compressor wheel- CNC machined compressor cover- VSR balanced- Flow-bench report supplied- Capable of supporting 200-250hp with supporting modificationsTCB...

All turbochargers are supported with over 40 years specialised experience in the industry- Direct bolt in replacement- 60mm machined from solid 6 6 compressor wheel- 58/67mm Inconel turbine wheel- D5S cast exhaust housing- Adjustable billet actuator- Dual ceramic ball bearing pack- Fitting kit inclu...

- TD04HL-19T water-cooled CHRA- Water-Cooled aluminium turbine housing- Adjustable billet actuator- Machined from solid 46mm compressor wheel- Capable of supporting 250-300hp- Comes complete with fitting kit- Turbo total weight 6kgTurbo is designed for those looking for a compact solution with the ability to run water-cooling through the exhaust housing for heat management.

- 100% drop in replacement turbo with electronic actuator- Capable of supporting up to 550hp while maintaining stock like response. To achieve these results intake, exhaust, intercooler and tuning is required- Dual ceramic ball bearing- D5S cast exhaust housing- 48mm machined from solid compressor w...

All turbochargers are supported with over 40 years specialised experience in the industry- Turbo will support up to 150hp (tuning required to achieve these results)- 42mm machined from solid 6 6 compressor wheel- 41mm 12 blade turbine wheel- Turbo comes with new studs, nuts, gaskets- Billet actuator...

All turbochargers are supported with over 40 years specialised experience in the industry- 100% bolt in turbo for the Nissan Safari/Patrol fitted with the ZD30- 43mm machined from solid compressor wheel 6 6- Upgraded thrust kit- Direct replacement for the following OEM part numbers 14411-VC100, 1441...

All turbochargers are supported with over 40 years specialised experience in the industry- 100% bolt in turbo- Capable of supporting 280-320HP with supporting modifications and tuning- Comes complete with gaskets & studs- 49mm machined from solid 6 6 compressor wheel- Upgraded turbine wheel- Upgrade...

Introducing performance out of a package you never thought possible. This clean sheet product is tailored to meet the demands of hard core racing enthusiasts while providing industry leading power capability in a small package.The G-Series G35-900 turbocharger is compatible with 2.0L – 5.5L engine...

All turbochargers are supported with over 40 years specialised experience in the industry- 100% bolt on turbo- CNC machined compressor cover- 46.5mm 9 blade machined from solid compressor wheel- 53/47 9 blade turbine wheel- Single scroll turbine housing- Turbo will support up to 230kw with supportin...

All turbochargers are supported with over 40 years specialised experience in the industry- 49mm machined from solid 7 7 compressor wheel- 49mm 9 blade inconel turbine wheel- Ceramic ball bearing CHRA assemblies- CNC machined compressor covers- Turbine housings machined to take larger turbine wheels-...

Introducing performance out of a package you never thought possible. This clean sheet product is tailored to meet the demands of hard core racing enthusiasts while providing industry leading power capability in a small package.The G-Series G25-550 turbocharger is compatible with 1.4L – 3.0L engine...

- 44/61 compressor wheel 6 6 splitter- 40/52 turbine wheel- 5.5cm T25 internally gated turbine housing- M10x1.25 oil feed inletGreat upgrade for various 2.5-3.0L diesel engines. Turbo is capable of supporting up to 200hp with supporting modificationsLooking for more, we also offer the HE221W-6CM variant which has a larger turbine wheel 6cm turbine housing and billet 44mm compressor wheel.