Vantage Rv 58 views   1 clicks Claim this Business♡

This is a Fiamma wall-mounted awning fixing kit for the Toyota Coaster bus from 1993 onwards, simply use these adaptor brackets and fit any Fiamma wall-mounted awning above the gutter line of the roof.The standard mounting kit that comes with the new Fiamma awning will bolt straight onto the predril...

Fiamma F80 or F65 roof-mounted awning fixing kit for the VW Crafter and Mercedes Sprinter panel vans with high roofs built after June 2006, simply use this adaptor bracket and fit to approved points on the roof. These units can be installed at our workshop in Silverdale. Please for further informati...

CAREFREE WHITE LONG HARDWARE (UNIVERSAL).These are the arms that hold up the roll-out awning, this is for a pairBest suited for larger caravans with a straight outer wall, i.e. walls with a height of 1.7mt – 2.1mt from the floor line up to the awning railing. Please to discuss what hardware is required for your vehicle. Tel: 09 427 8247 Email: info@vantagerv.nz

The Fiamma roof-mounted awning bracket kit for a Fiat Ducato panel vans built after June 2006, The brackets can be fitted without any drilling, simply use the optional adaptor bracket suited to the type of vehicle to which it will be fitted. Order brackets separately depending on vehicle type These ...

The Fiamma straight center rafter helps to reduce center water pooling on the canopy and stiffens up the canopy tension. It is made from telescopic anodized aluminum which clips into the standard Fiamma F45 awning These units can be installed at our workshop in Silverdale. Please for further informa...

The Fiamma curved center rafter helps to reduce center water pooling on the canopy and stiffens up the canopy tension. It is made from telescopic anodized aluminum which clips into the standard Fiamma F45 awning These units can be installed at our workshop in Silverdale. Please for further informati...

The Fiamma F45S F65S and F80 awning winding handleTechnical information - The minimum length is 1.54 meters and the maximum length is 2.4 meters

The Fiamma F45S wall brackets for connecting the awning legs to the side of the vehicle, they come in a set of 2 one for each leg

Have you lost or broken your crank handle for the awning?This 1230mm crank handle works with all F45S awnings up to 400cm.It has a folding handle that is made of aluminum.Weight only 0.4kg.AvailabilityOn Backorder ETA Mid March 24

Have you lost or broken your crank handle for the awning?This extendable crank handle extends from 1050mm to 1600mm works with all Thule awningsIt has a retracting handle that is made of aluminum.Weight only 0.5kg.

Hold down the legs of your awning by pegging them with these ultra-strong pegs, they come in a set of 4 two pegs for each leg

This is a wall-mounted awning fixing kit designed for fitting either Fiamma or Thule wall awnings to the side of Toyota Coasters, Toyota Hiace, or any vehicle with gutters.Simply clamp these adaptor brackets on the gutter in a location specified by the awning instruction manual, bend and shape the s...

Secure your roll out awning by distributing the tension evenly across the canopy. It is a wrinkle resistant strip that fits to awnings of up to 25'. The kit includes straps, stakes springs and brackets

The Fiamma Awning F45 Side Pro Adaptor Kit is used as a rapid clip system fixing kit for the side walls on Fiamma F45s and F45Ti awnings up to 4.5m.It is also suitable for Fiamma F45i awnings (250-400mm length) and F45iL awnings (450-550mm length).This awning adaptor kit comes with two brackets and two rafter fittings.

A Fiamma tie-down allows for solid anchoring of the awning bar, with springs to adsorb the wind forces on the awing canopyIt fits into the awning rails or the side clip of the privacy room.Comes with two 300cm adjustable bands & the necessary stakes & tensionContains the following:2 x Tie downs2 x Front Hooks2 x Springs2 x Ground stakes