Vinny Fab 190 views ♡

Suits: 00 AWG to 12AWG cable.Includes: 1 x Hydraulic crimping tool. Rated to 5 Ton. 8 x Die Sets - (Sizes 4,6,10,16,25,35,50,70mm2) 1 x Hydraulic Rebuild Kit 1 x Moulded Carry Case 1 x Quick Start Guide

Suits: DTM Series Solid Contacts and Cable sizes 0.515mm2 to 0.81mm2Includes: 1 x DTM CrimperNotes: Use with Solid Barrel Contacts

Suits: Suits DT Series Solid Contacts and Cable sizes 0.5mm2 to 1.5mm2Includes: 1 x DT Crimping ToolNotes: Use with Solid Barrel Contacts

Suits: DTP Series Solid Contacts and Cable sizes 2.05mm2 to 3.3mm2Includes: 1 x DTP Crimping ToolNotes: Use with Solid Barrel Contacts

Features- Open barrel crimper tool (Red) for 30-16AWG- Open barrel crimper tool (Blue) for 24-14AWG- Deutsch series pin removal tool (DT/DTM/DTP/DRB)- Large pin removal tool- Small pin removal toolIncludes: 2 x Open Barrel Crimper tools 3 x Removal tools

The Link Crimping Tool for terminals to suit AMP Superseal connectors. To suit terminals used in A, B, C, D and E loom connectors.

Collar Tool Suit PowerPort Blow Off Valve by Turbosmart. Required for servicing and spring changes.Does not suit RacePort or ProPort Valves.

Turbosmart's GenV Collar Tool is designed specifically for Turbosmart's WG45/WG50 HyperGate45 and ProGate50 Actuators, including Turbosmart's ProPort Blow Off Valves.This tool is unsuitable for other sizes of Turbosmart Wastegates or Turbosmart RacePort and PowerPort Blow Off Valves. The GenV Collar...

Turbosmart’s Locking Collar C Spanner Tool is designed to fit perfectly with Turbosmart's locking collar system, allowing you to easily and securely tighten or loosen the locking collar on Turbosmart products. This spanner offers an easy-to-use design that allows for quick adjustments and secure t...

The Turbosmart GenV WG60 Actuator Collar Tool is specially designed to make installing and removing Turbosmart actuators easy and efficient. Featuring a unique design with an adjustable collar, this tool helps reduce the risk of damaging the actuator during assembly or disassembly. The Turbosmart Ge...

The Turbosmart GenV WG38/40 Actuator Collar Tool is specially designed to make installing and removing Turbosmart actuators easy and efficient. Featuring a unique design with an adjustable collar, this tool helps reduce the risk of damaging the actuator during assembly or disassembly. The Turbosmart...

Turbosmart's designed to make it easy for users to replace their diaphragms. This tool is a must-have if you own Turbosmart products and require regular maintenance or upgrades. The tool comes with all the necessary parts, making it much easier than trying to source them yourself. The innovative des...

Turbosmart's designed to replace the diaphragm in Turbosmart Gen-V wastegates much faster and easier. This tool allows users to quickly and easily detach and reattach the diaphragm without disassembling the entire unit. This cost-effective tool is manufactured with high-grade materials for durabilit...

The Turbosmart the perfect tool for anyone wanting to change their wastegate springs safely and efficiently. This universal device can be used on any Turbosmart wastegate and mounted onto a table or vice for greater stability and control. You only need a straightforward tool to activate the press, m...

Coil conversion kit manufactured by Franklin Performance to fit modern high power Nissan VR38 coils to Nissan RB20, RB25 and RB26 engines, including Neo engines.Our kits incorporate genuine Hitachi R35 GTR Ignition coils and output nearly 3 times the OEM power output, and are proven to support in ex...

VCT oil return kit for Nissan RB25DET & RB25DE engines. The VCT oil drain sits just in front of the exhaust manifold and helps to drain excess oil from the head of the engine.Complete with 8AN hose, fittings and fasteners required.The custom VCT oil return flange is CNC machined from billet 6061-T6...

Billet aluminium washer and bolt set for Nissan RB20, RB25 & RB26 engines.The set comes with 20 CNC machined washers in a selection of colours, 20 black plastic washers to prevent marking on the rocker covers, and high quality zinc plated fasteners to suit.Compatible with all variations of Nissan RB...

Cam angle trigger kit to improve timing accuracy and correct timing issues associated with factory Nissan RB CAS sensors.The kit features a cam mounted single-point trigger and CNC machined aluminium housing with high quality Cherry hall-effect sensor.A unique two-piece housing with removable cover...

CNC machined billet aluminium washer and bolt set for Nissan SR20 engines.The set comes with 15 machined washers anodised in a range of colours, or natural aluminium, and high quality zinc plated fasteners to suit.Compatible with all variations of SR20DE, SR20DET engines from Nissan Silvia and Nissa...

High quality oil cooler kits by Franklin Performance.Complete with all the fittings and hose needed.The oil cooler is a quality Aeroflow 19 Row Universal Oil Cooler. Dimensions are 330mm L x 146mm H x 51mm.Supplied with:- 2x 10AN 90deg Hose Ends- 2x 10AN 45deg Hose Ends- 2x 10AN ORB Adaptors for Oil...

Oil cooler kit to plumb in aftermarket oil cooler to Mazda 12A and 13B rotary engines.High quality braided hose and anodised fittings.The kit contains:4 metres Black 10AN Braided Hose2x 10AN 90degree Hose Ends2x 10AN 45degree Hose Ends1x 10AN to M16 adaptor for front cover1x 10AN to M18 adaptor for...

Franklin Performance LS alternator upgrade kit for Nissan RB engines.Through clever design and demand from our customers Franklin Performance are proud to call this the best LS alternator upgrade kit on the market.Compatible with all Nissan RB20, RB25, RB25 Neo, RB26 and RB30 engines, the kit will u...

Coil conversion kit manufactured by Franklin Performance to fit modern high power Nissan VR38 coils to Mazda Series 6 & Series 5 13B engines.Our kits incorporate two genuine Hitachi R35 GTR Ignition coils and output nearly 3 times the OEM power output, and are proven to support in excess of 1000HP.H...