Vretro Design 1 views Claim this Business♡

The VR40010 is a modern plugin replacement for the Amstrad CPC 40010 Gate Array.VR40010 Features include:- Plugin replacement.- Low profile 40 pin DIL footprint.- Provides the same as the original Amstrad 40010 GA.- Tested with an extensive suite of Amstrad CPC software.- Compatible with interfaces ...

The VR40007 is a modern plugin replacement for the Amstrad CPC 40007 Gate Array.VR40007 Features include:- Plugin replacement.- Low profile 40 pin DIL footprint.- Provides the same as the original Amstrad 40007 GA.- Tested with an extensive suite of Amstrad CPC software.- Compatible with interfaces ...

A vDrive ZX complete with replica Microdrive case and brand new Microdrive cable.For more information on the individual components please see the dedicated product pages.

A vDrive ZX with a vLA1 and a cable.

The AY-3-8912-AVR is a fully functional replacement (pin compatible - providing both programmable sound generator and IO) for the increasingly difficult to source AY-3-8912 sound chip.Features include: - 3 channels of tone noise- Bidirectional 8-bit input/output port with built-in pullup resistors- ...

The AY-3-8912A-TS is a fully functional replacement (pin compatible - providing both programmable sound generator and IO) for the increasingly difficult to source AY-3-8912A sound chip as well as supporting an additional 3 channels of tone noise (Turbo Sound).Features include: - 6 channels of tone 2...

The vMapQL …Can flexibly map both internal and external Microdrives to a wide range of address combinations allowing, for example, external Microdrives (or virtual drives) to appear as mdv1 or mdv2.It is powered by the Microdrive bus and, apart from a relatively straight forward installation proce...

A fully assembled vDrive QL complete with 3D printed case, a vMap and a Microdrive cable.Ready to plug in and play

A fully assembled vDrive QL complete with vMap.Ready to plug in and play

A fully assembled vDrive QL fully assembled in 3D printed enclosure.

A fully assembled vDrive QL complete with Microdrive cable.Ready to plug in and play

The VR177X-02 is a modern plugin replacement for the WD1770/WD1772/VL1772 floppy drive controller.VR177X-02 Features include:- Plugin replacement.- Low profile 28 pin DIL footprint.- Provides the same as the original WD1770/WD1772/VL1772.- Auto switching between 8MHz and 16MHz operation.- Full 5V TT...

The vDriveZX delivers hardware emulation for up to eight Microdrives and includes a comprehensive toolkit for managing Microdrive Cartridge images which are stored on SD Card. The vDriveZX is simply connected to your Interface 1, either with your existing Microdrives or by itself. An existing Microd...

The vDrive QL delivers hardware emulation for up to eight Microdrives and includes a comprehensive toolkit for managing Microdrive cartridge images which are stored on SD Card. The vDriveQL simply connects to your QL’s external Microdrive bus and is accessed with the usual Microdrive commands.A 3D...

A brand new Microdrive cable (black) for connecting a vDrive ZX (or an original ZX Microdrive) to the Sinclair Interface 1.The same cable is used to connect a vDrive QL to the Sinclair QL.

The provides a modern, efficient replacement for the original Sinclair QL power supply. The converter takes a nominal 12V input from a customer supplied power supply (plug pack or other suitable power source with a 2.1mm DC plug - either positive or negative center contact) and converts this single ...

An enclosure to go with your vDriveQL!No need to dismantle an existing Microdrive for the case, you can now buy a custom 3D printed enclosure designed specifically for the vDriveQL.Note the enclosure is 3D printed and although the visible surface finish has been optimized there are still some minor ...

A brand new, injection-molded, replica plastic enclosure for your vDrive or Microdrive.Comes unassembled with faceplate, screws, and feet.

The original ULA has an unfortunate history of being prone to spectacularly overheat and fail without warning, leaving an unsightly crater in the Interface 1 plastic case. Because of this, and due to the original ULA now becoming hard to find, the vLA1 project was born.The vLA1 is a pin-for-pin func...

The vLA128 is a modern plugin replacement for the Spectrum 128K(aka 'Toastrack') or Spectrum 2 (Grey case) ULA (type 7K010E-5 or Amstrad 40056). It is one of several ULA replacements I have made for members of the Sinclair computer family including the vLA81 for the ZX81, the vLA82 for the Spectrum ...

The vLA82 is a modern plugin replacement for the Spectrum 48K ULA (type 6C001E-7 or earlier). It is one of several ULA replacements I have made for members of the Sinclair computer family including the vLA81 for the ZX81, the vLA128 for the Spectrum 128K (Toastrack) and 2 (Grey case) and the vLA1 fo...

The vLA81 is a modern plugin replacement for the ZX81 ULA. It is one of several ULA replacements I have made for members of the Sinclair computer family including the vLA82 for the Spectrum 48K, the vLA128 for the Spectrum 128K (Toastrack) and 2 (Grey case) and the vLA1 for the Sinclair ZX Interface...

The vLA82S is a modern plugin replacement for the Spectrum 48K ULA (type 6C001E-7 or earlier) which combines the original vLA82 capability with the addition of an RGB video interface and AY compatible sound. It is one of several ULA replacements I have made for members of the Sinclair computer famil...

The vLA82S is a modern plugin replacement for the Spectrum 48K ULA (type 6C001E-7 or earlier) which combines the original vLA82 capability with the addition of an RGB video interface and AY compatible sound. It is one of several ULA replacements I have made for members of the Sinclair computer famil...