ENVO ZigBee to DALI + 0/1-10V 2-in-1 Conveter

 
Features:

- Zigbee to DALI 0/1-10V 2 in 1 converter based on zigbee 3.0
- Zigbee signal input, DALI signal output to DALI line or 0/1-10V signal output, 110-240VAC power input
- With relay output, max. 5A for traditional incandescent & HV halogen lamps, max 1.6A for LED load
- Compatible with universal Zigbee gateway or hub products
- Can directly pair to a compatible ZigBee remote via Touchlink
- Compatible with universal Zigbee remotes
- Supports self-forming zigbee network without coordinator
- Supports find and bind mode to bind a ZigBee remote
- Supports zigbee green power and can bind max. 20 zigbee green power remotes
- DALI signal or 1-10V signal output selectable by DIP switch
- Built-in DALI bus power supply, no extra DALI bus PS required
- With max. 50mA DALI bus power current output
- To supply control current to up to 25 DALI control gears
- DALI DT6 or DT8 device type selectable by DIP switch under DALI mode
- Color control according to DALI specifications of Device Type 8,
- Color type: Tc, XY coordinates, RGBW selectable by DIP switches
- DALI address control mode or group control mode selectable by DIP switch
- Enables to select the DALI address (00-63) to be controlled by DIP switches
- Enables to select the DALI group (0-15) to be controlled by DIP switches
- Enable to control 1 DALI Group of devices or 1 DALI Address on DALI line
- Enable to control all devices on DALI line via broadcast
- Waterproof grade: Ip20
- DO NOT install with power applied to device.
- DO NOT expose the device to moisture. General Specification

Zigbee Protocol

Zigbee 3.0

Input Power

110-240VAC

Input Signal

Zigbee 2.4Ghz

Output DALI PS current

Max. 50mA

DALI current consumption

Max. 4mA

Output Current

Max. 20mA

Switching Voltage

110-240VAC

Max. Current

Incandescent: 5A

LED: 1.6A

Operating Temperature

-20°C- 50°C

Relative Humidity

8% to 80%

Dimension (LxWxH)

95x37x20mm

Store:
Wellforces
SKU:
EV-ZBDA-2421
Price:
$109.38
0 0
×