Bluelab Corporation 1 views Claim this Business♡

Easily connect the Bluelab IntelliDose to the Edenic app.Features:- Connects the Bluelab IntelliDose Controller to the internet- Connect to your local router via Ethernet cable or Wi-Fi- Requires the Edenic app

A replacement depth gauge and probe tip cover for the Bluelab Pulse Meter

A replacement pump and cassette assembly for the Bluelab Peripod L3 (PERIPODL3) - 1200 ml, 40.6 fl.oz /min

A replacement cassette for the Bluelab Peripod L3 (PERIPODL3) - 1200 ml, 40.6 fl.oz /min

A replacement pump and cassette assembly for the Bluelab pH Controller Wi-Fi (BCTPHC02), Bluelab PeriPod M3 (PERIPODM3), and Bluelab PeriPod M4 (PERIPODM3) – 120 ml, 4.06 fl.oz /min

A replacement shroud for Bluelab Truncheon Meter V2 and Commercial Truncheon Meter V2

A replacement battery cap for Bluelab Truncheon Meter V2 and Commercial Truncheon Meter V2

Direct replacement for the Intelli Range power supply 24DC 2.5A

Bluelab PeriPod M3 (PERIPODM3), PeriPod M4 (PERIPODM4) and PeriPod L3 (PERIPODL3) replacement power supply. 24 V 2.05 Amp.Electronic mains switching designed to activate mains-powered equipment.Four plug adaptors for New Zealand/Australia, North America, United Kingdom, Europe.

Acid/Alkali Tubing (PTFE). 4 meters cut length with barbs. Compatible with Bluelab PeriPod L3.As a guide, Bluelab recommends the following maximum concentration for commonly used acids and alkalines:- Nitric Acid =< 35%- Phosphoric Acid =< 85%- Citric Acid =< 60%- Potassium Hydroxide =

Replacement pH adjuster dosing tube for pH Controller (13 ft /4 m)Acid dosing tube suitable for the Bluelab pH Controller (CONTPH - No longer available) and pH Controller Connect (CONTPHCON - No longer available) - 4m/13ft Includes joiners (2x reducing 3-1.6mm, PVDF)Acid/Alkalai Tubing (PTFE) As a g...

Acid Tubing (White) Suitable for Bluelab PeriPod M3, PeriPod M4 and Bluelab pH Controller Wi-Fi - 4meters. Includes joiners (2x 1/8" straight, PVDF) As a guide, Bluelab recommends the following maximum concentration for commonly used acids and alkalines:- Nitric Acid =< 35%- Phosphoric Acid =< 85%- Citric Acid =< 60%- Potassium Hydroxide =

Nutrient Dosing Tube (Black) Suitable for Bluelab PeriPod M3 and Bluelab PeriPod M4 - 4m. Includes joiners (2x 1/8" straight)As a guide, Bluelab recommends the following maximum concentration for commonly used acids and alkalines;Nutrient tubing (LDPE)Nitric Acid

Nutrient Dosing Tube Suitable for Bluelab PeriPod L3 - 4m. Includes tube fittings (1x Male 5/16", 1x Female 5/16" Luer Coupler, barbed).As a guide Bluelab recommends the following maximum concentration for commonly used acids and alkalines;Nutrient tubing (LDPE)Nitric Acid

A replacement cassette for the Bluelab pH Controller (CONTPH), pH Controller Connect (CONTPHCON), Bluelab pH Controller Wi-Fi (BCTPHC02), Bluelab PeriPod M3 (PERIPODM3), and Bluelab PeriPod M4 (PERIPODM3). Suitable for 10 ml - 120 ml pumps only.Features:- Single unit contains rollers and internal tu...

Replacement power supply with four plug adaptors for New Zealand/Australia, North America, United Kingdom, Europe.Power Out: 5 V DC, 1 Amp

Replacement power supply with four plug adaptors for New Zealand/Australia, North America, United Kingdom, Europe.Power Out: 24 V DC, 0.4 Amp

Length: 1 metre / 3.28 foot. M12 8pin to M12 8pin

Eliminate the risk of damaging your pH probe when measuring in soil. Use with: Bluelab Soil pH Probes and Bluelab Leap pH Probes

Protect your pH probe from damage when securing it inside a nutrient reservoir. Use with: Bluelab pH Probes

A replacement conductivity probe for the Bluelab IntelliDose Controller (BCTIND01) with 5 metre /16 foot cableFeatures:- This probe is a direct replacement for the EC probe on the Bluelab IntelliDose Controller- With an accurate EC sensor, you can measure electrical conductivity (EC) in your solution reliably- Wire configuration: Black, White, Red

Dependable double-junction pH probe technology that's built to last.Suitable for solution. Compatible with all Bluelab handheld meters, monitors and controllers with a BNC connection.Features:- Double-junction- Standard BNC connector- 2 metre / 6.6 foot cable- Polycarbonate body- Waterproof- Probe holder with suction cup- KCl-filled storage cap

A replacement pH, Conductivity (EC), and Temperature Probe for Bluelab OnePen (PENONE)Maximise the life & accuracy of your Bluelab OnePenFeatures:- Extends the life of your Bluelab OnePen, minimising the need for full device replacements- Quick and simple to replace, reducing downtime and keeping yo...

Durability, platinum precision, and ceramic stability.- Platinum spiral electrode- Ceramic diaphragm- Double-junction- Standard BNC connector- 2 metre / 6.6 foot cable- Polycarbonate body- 12mm/0.47" x 122 mm/4.8" shaft- Waterproof- KCl-filled storage capReplacement probe for the Bluelab ORP Meter. Can be used with any meter with a BNC connection.