Carbide Tools 78 views ♡

-$75.40 – Price range: $75.40 through MICRO GRAIN SOLID CARBIDE-Chamfering angle 90° inclusive or 60º inclusive on request-A 4-flute chamfer tool is highly effective for deburring, edge breaking, and chamfering in CNC machining-Can be used for chamfering, countersinking, deburring, and V-gr...

-$30.00 – .00 Price range: $30.00 through .00MICRO GRAIN CARBIDE-30° Helix Angle to promote rapid chip evacuation.-Rolled point. 140° Point angle, strong tapered flute core.-Short Length. Tap drill sizes.-Advanced material and geometry.-More rigid design for improved drill accuracy.

-$49.01 – Price range: $49.01 through MICRO GRAIN CARBIDE-Widely used on materials such as Plexiglass and Perspex.-The straight flute is preferred where the workpiece is fairly rigid.-Excellent for routing harder materials that require a fine finish.-4 flutes offers faster cutting.-Smooth Run...

$45.00

$80.00 – .00 Price range: $80.00 through .00MICRO GRAIN CARBIDE-Coating available on request.-Perfectly balanced, high speed, high feed.-All-in-one stock removal and finishing tool, cut and polish in one cut.-Especially designed for milling, excellent tool for soft, flexible materials like Aluminium.-Extra wiper cut geometry for a clean cut and smooth finish.

$125.60 – 0 Price range: $125.60 through 0

-$68.20 – Price range: $68.20 through MICRO GRAIN CARBIDE-20° Helix Angle-Excellent tool for cutting a wide range of woods including plywood and MDF-Centre Cutting-The upcut geometry puuls chips away from the cutting surface, preventing clogging and reducing heat buildup.-This is especially ...

-$54.99 – 0 Price range: $54.99 through 0MICRO GRAIN CARBIDE-20° Left hand Helix Angle, right hand cut, centre cutting front-Excellent tool for cutting pherolic, various plastics , soft woods and hard woods-The left hand helix directs the cutting force downwards effectively holding the materi...

-$68.20 – Price range: $68.20 through MICRO GRAIN CARBIDE-20° Helix Angle-Excellent tool for cutting a wide range of woods including plywood and MDF-Centre Cutting

-$78.30 – 0 Price range: $78.30 through 0MICRO GRAIN CARBIDE-20° Left hand Helix Angle, right hand cut, centre cutting front-Excellent tool for cutting pherolic, various plastics & wood-The left hand helix directs the cutting force downwards effectively holding the material rigidly in pla...

-$76.30 – 0 Price range: $76.30 through 0MICRO GRAIN CARBIDE-Down cut-7° Left hand Helix Angle, right hand cutting, chip breaking function.-Suitable for most composite materials. Handles higher feeds well.-Excellent for cutting & finishing superwood & fibre glass-Ideally suited to cut: ABS, MDF, Acrylic, Nylon phenolic, PVC & great for most glass fibre products.”

-$58.40 – Price range: $58.40 through MICRO GRAIN CARBIDE-2 flute groove cutter with 60° or 90° included angle-Used for sign-making and engraving, inlays and decorative panel designs-Suitable for soft mayerials that are prone to chipping (e.g. MDF, plywod, plastic)-Suitable for 3D carving a...

-$58.40 – Price range: $58.40 through MICRO GRAIN CARBIDE-2 flute groove cutter with 60° or 90° included angle-Used for signwork, chamfering, grooving, lettering and scoring panel design.

-$120.32 – 0 Price range: $120.32 through 0MICRO GRAIN CARBIDE-Especially designed for cutting low and high density foam materials at high speeds-25° Helix Angle-Suitable for high speed machining-3D forming, deep pocket milling and profiling for foam.

-$340.00MICRO GRAIN CARBIDE-Pilot cut sizes available 3.2mm, 4.5mm and 6mm with back Radius-R3.0 Radius-Tool designed to combine multiple operations into one, reducing tool changes and cycle times.-Design geometry ensures clean, precise cuts with minimal fraying or tearing-Combining Three Operations in a Single Tool for Maximum Productivity

-$150.00 – .00 Price range: $150.00 through .00MICRO GRAIN CARBIDE-Coating available on request-Double facet, tight tolerance (H7).-This “one-shot" drill-reamer is used accurately to drill and ream holes in one operation.-Used in composite materials.-Excellent for drilling graphite composites.

-$82.40 – 0 Price range: $82.40 through 0MICRO GRAIN CARBIDE-5° Left hand Helix Angle, right hand cutting, chip breaking function.-Suitable for most composite materials. Handles higher feeds well.-Excellent for cutting & finishing superwood & fibre glass, ideal for routing contoured s...

-$89.63 – 0 Price range: $89.63 through 0MICRO GRAIN CARBIDE- ensure clean, burr-free edges, reducing the need for additional finishing-They prevent delamination of the aluminium layers, preserving the integrity of the panel-Suitable for architectural cladding, singage and shopfitting applications-Designed to cut through ACM quickly, improving production rates

-$60.79 – Price range: $60.79 through MICRO GRAIN SOLID CARBIDE-Low vibration, long reach for vavity milling.-Specially designed front radius and teeth for stability-High metal removal rate-High table feeds possible-User friendly-Application for a range of materials from soft to hardened steel, titanium and stainless steel-These can be sent back to us for a regrind

$112.00 – .00 Price range: $112.00 through .00MICRO GRAIN SOLID CARBIDEDESIGN FEATURES: Right hand cutting, Left hand helix, H6 tolerangeDesign for reaming in steel, non-ferrous materials & cast ironOn request: Out of Range / Other sizes and coated product

-$101.86 – Price range: $101.86 through MICRO GRAIN SOLID CARBIDE-Tool Designed for high-volume stock removal-40° Helix Angle to promote rapid chip evacuation.-Varibale flute design minimizes vibration and chatter for smooth cutting-Thicker core increases tool strength, reducing deflection a...

-$60.45 – Price range: $60.45 through MICRO GRAIN SOLID CARBIDE-90° drill point (60° drill point on request)-Unique four facet point.-The spotting drill will offer greater precision in spotting applications.-This tool can be used to stabilize a deep hole drilling operation or chamfer a hole for another drill.-Ideal for CNC Machining & Multi-Step Drilling

-$145.60HIGH SPEED STEEL-Custom sizes available on request-Designed to be used with rotary holders to cut polygonal profiles into a material-Ideal for mass production-Effective on stainless steel, titanium, aluminium and brass-Allows for efficient, single-pass machining, reducing cycle times

-$52.40 – Price range: $52.40 through MICRO GRAIN CARBIDE-37º Helix Angle, right hand cut, centre cutting.-Suitable for routing contoured surfaces with 3D software.