Combat Robotics 37 views   3 clicks Claim this Business♡

These connectors are made from high-temp nylon with gold-plated spring pins or sockets moulded in. The shape of this generic XT90 prevents reverse polarity, and when plugged in the connection is super-solid. Perfect for applications up to 90A continuous draw. Sold in pairs of 1 male and 1 female con...

Pending

The CellMeter 8 is the definitive " Swiss Army Knife" for every battery-powered hobbyist. Whether you’re a drone pilot, RC car enthusiast, or working with DIY electronics, this portable digital power checker is your first line of defense against battery failure. Designed for high-precision monitor...

Input Connector XT-60 (Pre-soldered) Why Choose the AM32 RedHobby?High-Torque Startup: Optimized for heavy spinning weapons or high-reduction drive setups.Proven Durability: Built on the rugged architecture trusted by combat roboticists for heat dissipation.Plug-and-Play Convenience: Pre-soldered le...

Input Connector XT-60 (Pre-soldered) (Recommend XT-90)Why Choose the AM32 RedHobby?High-Torque Startup: Optimized for heavy spinning weapons or high-reduction drive setups.Proven Durability: Built on the rugged architecture trusted by combat roboticists for heat dissipation.Plug-and-Play Convenience...

4s 12.0V 17.40V Yes 19.4%Signal-Input: SNIPE uses an intelligent failsafe system that monitors each input channel individually. It only triggers a fault if a channel mapped to an output is lost. Here's how the failsafe works:- Only mapped channels matter.- Example: If Channels 1 and 3 are mapped to...

These are a new addition to our super compact, lightweight receivers built on the awesome new ExpressLRS protocol/platform. These are a lower cost alternative to the RP2 ELRS receivers, arying much of the same capability (and a few differences).The main differences are this one is SLIGHTLY bigger th...

These are a new addition to our collection of receivers built on the awesome new ExpressLRS protocol/platform. These are intended to be a suitable replacement to the FS2A for those looking to keep the analog PWM channels, but switch to the ELRS protocol from Flysky.The main differences are this one...

Personalize the look of your Pocket Radio with our replacement cases. Choose from two standard colors, charcoal and transparent, or opt for stylish case colors in Blue, Pink, Green, and Orange to suit your unique style.

Replacement Gimbal and Stick for the Radiomaster Pocket Radio. In case you've dropped it, or the stick has become damaged, or if for some reason one is malfunctioning. This is an easy drop-in replacement!Or, if you're thinking of building your own DIY transmitter, this is also an option to get some...

This item is for one pair of upgraded high quality CNC Aluminium Hall-Effect Gimbals for the Radiomaster Pocket Radio!Unleash Unrivalled Precision and Control: Introducing the AG01-Nano Hall Effect Gimbals! Your RadioMaster Pocket just got a game-changing upgrade option! RadioMaster, renowned for el...

These are the printed parts used in our Ant Weight Kit, and it's associated modules (weapons, ).This product ONLY includes the printed parts (for example as replacements or spares), if you require other parts, see our available kits which include all the electronics required as well.The Core Kit is...

This Ant Weight Starter Kit includes everything you need to get started with your first Bot!The Kit includes a 3D Printed Chassis, designed to be modular, allowing expansion and customization, as well as a radio receiver, battery, speed controllers, motors, wheels, as well as a power switch, LED, an...

The KIWI is a compact and powerful brushless speed controller purpose-built for combat robotics It runs AM32 firmware: offering smooth throttle response, dynamic braking, and configurability via a standard USB serial dongle, ready to drop into any serious robot build.The product is named after the K...

The RadioMaster T8L brings the power of ExpressLRS 2.4GHz into a clean, compact form — and is the first screenless radio controller officially supported by ExpressLRS.Whether you’re working on compact projects, running simulators, testing configurations, or need a dependable backup controller, t...

The KAKAPO is a compact, all-in-one control and power platform that's designed to be the heart of your robot, removing setup headaches so you can focus on building and battling. It builds on the proven WEKA dual DC motor architecture, now adding integrated power switching, distribution, and dedicate...

Antweight High Traction Plastic WheelsThese wheels are lightweight, durable, and offer superior traction due to their high grip silicone tyres. They are compatible with the Pololu 32mm Wheels and press fit onto our standard N20 motor Shafts. They are the same wheels used in our Ant Starter Kit, and...

These wheels offer extremely high traction, light weight, and durability due to impact resistant TPU printed inner hub. They are compatible with the FingerTech Twist Hubs, they press on and lock into place better than the foam wheels do, and do not spin on the hub, allowing much more authority of bo...

The RadioMaster RP series receivers are built-in a TCXO (temperature-compensated crystal oscillator) now, which ensures reliable, stable, and accurate signal reception, allowing for superior performance in demanding environments and enhancing the flight experience.These are our new super compact, li...

The RadioMaster Pocket is a small, lightweight radio that packs a big punch. We have chosen these as the superior replacement to the Jumper T-Pro which we used to carry. It is more capable, more durable, more compact, and comes at a more affordable price!Our RadioMaster Pocket transmitters are all E...

The RadioMaster 4IN1 external module is a multi-protocol module that integrates CC2500, NRF24L01, A7105 and CYRF6936 RF chips. Designed for OpenTX and EdgeTX systems, the RM 4IN1 module allows the radio to connect with most mainstream protocols on the market. This Module will allow you to add Multi-...

We have hand selected these batteries with top quality specs specifically for Combat Robotics. These are our new Featherweight Batteries!This high quality, low internal resistance and high discharge rate battery pack from GNB is perfect for the high demand that competitive featherweights put on our...

WEKA is a compact dual DC-motor ESC: originally designed for combat robots, but is suitable for any application requiring a lightweight durable motor driver.Developed and tested in Christchurch, New Zealand by Connor Benton. FEATURES - 2x Bi-Directional DC-motor outputs.- Status LED's to indicate ru...

WEKA is a compact dual DC-motor ESC: originally designed for combat robots, but is suitable for any application requiring a lightweight durable motor driver.Developed in Christchurch, New Zealand by Connor Benton and tested in Nashua, USA by Seth Schafer. FEATURES - 2x Bi-Directional DC-motor output...