3d Shop 24 views Claim this Business♡

95A Hardness TPU capable of high speed (12 mm³/s MVS) printing.For best results, dry TPU thoroughly before use. Dry at 55°C–65°C for 6 to 8 hours.Glue on the print surface is recommended to aid in removing the finished print.M aterial: TPU 95A HFDiameter: 1.75mm /- 0.03mmWeight: 1...

Gradient colour change Silk PLAM aterial: PLADiameter: 1.75mm /- 0.03mmNet Weight: 1kg / packRecommended Printing Settings Print Layer Height 0.2mm Nozzle Temp 200°C - 220°C Heated Bed Temp 50-70°C Printing Speed < 150 mm/s 

Gradient colour change Silk PLAM aterial: PLADiameter: 1.75mm /- 0.03mmNet Weight: 1kg / packRecommended Printing Settings Print Layer Height 0.2mm Nozzle Temp 200°C - 220°C Heated Bed Temp 50-70°C Printing Speed < 150 mm/s 

Gradient colour change Silk PLAThe colour change is gradual, taking approximately 150grams to go through all the coloursM aterial: PLADiameter: 1.75mm /- 0.03mmNet Weight: 1kg / packRecommended Printing Settings Print Layer Height 0.2mm Nozzle Temp 200°C - 220°C Heated Bed Temp 50-70°C P...

Gradient colour change Silk PLAM aterial: PLADiameter: 1.75mm /- 0.03mmNet Weight: 1kg / packRecommended Printing Settings Print Layer Height 0.2mm Nozzle Temp 200°C - 220°C Heated Bed Temp 50-70°C Printing Speed < 150 mm/s 

Gradient colour change Silk PLAM aterial: PLADiameter: 1.75mm /- 0.03mmNet Weight: 1kg / packRecommended Printing Settings Print Layer Height 0.2mm Nozzle Temp 200°C - 220°C Heated Bed Temp 50-70°C Printing Speed < 150 mm/s 

Silk PLA with two or three colours coextruded, showing different colours when you look at your prints from different anglesNew and improved formula, with increased toughness.M aterial: PLA SilkDiameter: 1.75mm /- 0.03mmWeight: 1kg / pack Recommended Printing Settings Print Layer Height 0.2mm Nozzle...

PLA infused with natural wood powder.Material: PLADiameter: 1.75mmWeight: 1kg / packRecommended Printing Settings Print Layer Height 0.2mm Nozzle Temp 180°C - 220°C Heated Bed Temp 25-60°C Printing Speed 40~60 mm/s 

SKU Name Colour in Light Colour in Dark NT1421 Glow Rainbow Colourless Rainbow NT1451 Dreamy Melody Rainbow RainbowM aterial: Glow in the Dark PLA HSDiameter: 1.75mm /- 0.03mmWeight: 500g / spool Also available in 1kg spools https://3dshop.co.nz/pla-glow-in-the-dark-rainbow-1kg/Note-1. Glow in the d...

Marble coloured PLA - Brick RedM aterial: PLADiameter: 1.75mm /- 0.03mmNet Weight: 1kg / packRecommended Printing Settings Print Layer Height 0.2mm Nozzle Temp 190°C - 220°C Heated Bed Temp 40-60°C Printing Speed < 150 mm/s 

Factory Clearance -The factory made too much stock of these colours so is clearing them out.These colours may or may not be restocked, if there are any you like let us know and we may be able to add it to the regular line up.----------Available Colours - NT1701 Crystal Rainbow NT1706 Crystal Fire NT...

Material: PC-ABSDiameter: 1.75mmWeight: 1kg / packPC-ABS combines the heat resistance of polycarbonate (PC) with the flexural strength of ABS. As a result, it offers one of the highest impact strengths among FDM thermoplastics. It is ideal for functional prototyping, rugged tooling, and production p...

M aterial: PETGDiameter: 1.75mm /- 0.03mmWeight: 1kg / pack Recommended Printing Settings Print Layer Height 0.2mm Nozzle Temp 230°C - 250°C Heated Bed Temp 70-90°C Printing Speed < 100 mm/sNotes:The previous line of Kingroon PETG has been discontinued, some of the colours may be diff...

Chameleon colour effect with sparklePLA HS (High speed) can be printed at higher nozzle temperatures and speeds.Available Colours - NT1901 Burnt Titanium NT1902 Nebula Purple NT1903 Abyssal Red NT1904 Rose Quartz NT1905 SkydiverM aterial: HS PLADiameter: 1.75mm /- 0.03mmWeight: 1kg / pack Note: it i...

PETG HFThe material combines excellent toughness and interlayer adhesion strength, enabling high-speed printing with outstanding building efficiency.Typical applicationsWith exceptional dimensional stability, it is ideal for functional testing and printing high-performance parts.Enhanced ToughnessPr...

PETG HFThe material combines excellent toughness and interlayer adhesion strength, enabling high-speed printing with outstanding building efficiency.Typical applicationsWith exceptional dimensional stability, it is ideal for functional testing and printing high-performance parts.Enhanced ToughnessPr...

PETG HFThe material combines excellent toughness and interlayer adhesion strength, enabling high-speed printing with outstanding building efficiency.Typical applicationsWith exceptional dimensional stability, it is ideal for functional testing and printing high-performance parts.Enhanced ToughnessPr...

Reusable Vacuum seal bags for filament storage.Wet filament is one of the leading causes of print quality issues.Store your filament in these (with a fresh desiccant pack) while not in use to keep it dry.Includes:- 10 Bags- Pump- Sealing clipNote:- You do not need to pull a strong vacuum, just remov...

Reusable Vacuum seal bags for filament storage.Wet filament is one of the leading causes of print quality issues.Store your filament in these (with a fresh desiccant pack) while not in use to keep it dry.Includes:- 15 Bags- PumpNote:- You do not need to pull a strong vacuum, just removing the excess...

Glows in the dark after being exposed to sun light, or use a UV light for a stronger effect.Note-1. Glow in the dark filament has abrasive additives that may cause some printer parts to wear faster, we recommend using a hardened steel (or better) nozzle and extruder gears.2. Not recommended to use i...

Discontinued Clearance - This item won't be restockedReplaced by 3dshop.co.nz/tpu-95a-hf-1kg/High elasticity and softnessKingroon TPU 95A has high elasticity. This soft and flexible filament offers exceptional impact resistance, making it an ideal material for protective covers and mats. Long-lastin...

M aterial: PLA MatteDiameter: 1.75mm /- 0.03mmWeight: 1kg / pack Note about the Colours -Matte Grass green is closer to Turquoise than green (see the example print below)Recommended Printing Settings Print Layer Height 0.2mm Nozzle Temp 200°C - 230°C Heated Bed Temp 50-65°C Printing Spee...

Discontinued Clearance - This item won't be restocked

Chameleon colour effect with sparkleM aterial: PLA ProDiameter: 1.75mm /- 0.03mmNet Weight: 1kg / packRecommended Printing Settings Print Layer Height 0.2mm Nozzle Temp 190°C - 220°C Heated Bed Temp 40-60°C Max Volumetric Speed 9-12 mm3/s