Duroweld 354 views   3 clicks ♡

Air Arc Gouging Carbons DC Current 9.5mm 450-600amps

Air Arc Gouging Carbons DC Current 8mm 400-450amps

Air Arc Gouging Carbons DC Current 6.5mm 320-370amps

Air Arc Gouging Carbons DC Current 5mm 250-300amps

Air Arc Gouging Carbons DC Current 13mm 800-1000amps

Silver Brazing Rod %/630-730C/Economical general purpose alloy Dimensions- 75cm

SOLD PER KG H13 Tool Steel is a chromium-molybdenum-vanadium alloyed steel that produces hot working weld deposits that are tungsten free, homogeneous, porous free, dense, and may be annealed and re-hardened, if necessary. Good resistance to abrasion at both low and high temperatures. High level of...

AWS A5.18 ER70S-6 ER70S-6 is a wire for TIG welding with pure Ar gas. All position welding and steel sheet welding can be performed quite easily. Most suitable for one-side welding of tubes. It is used in DC straight polarity.

AWS A5.18 ER70S-6 ER70S-6 is a wire for TIG welding with pure Ar gas. All position welding and steel sheet welding can be performed quite easily. Most suitable for one-side welding of tubes. It is used in DC straight polarity.

AWS A5.18 ER70S-6 ER70S-6 is a wire for TIG welding with pure Ar gas. All position welding and steel sheet welding can be performed quite easily. Most suitable for one-side welding of tubes. It is used in DC straight polarity.

AWS A5.18 ER70S-6 ER70S-6 is a wire for TIG welding with pure Ar gas. All position welding and steel sheet welding can be performed quite easily. Most suitable for one-side welding of tubes. It is used in DC straight polarity.

AWS A5.18 ER70S-6 ER70S-6 is a wire for TIG welding with pure Ar gas. All position welding and steel sheet welding can be performed quite easily. Most suitable for one-side welding of tubes. It is used in DC straight polarity.

AWS A5.18 ER70S-6 ER70S-6 is a wire for TIG welding with pure Ar gas. All position welding and steel sheet welding can be performed quite easily. Most suitable for one-side welding of tubes. It is used in DC straight polarity.

Welding of higher strength steel structures that require an appropriate degree of toughness and crack resistance to temperatures as low as -60C (-76F). Nickel bearing low hydrogen designed for joining low alloy streets requiring high elongation combined with excellent low temperature impact values...

The DUROARC® 77 is an extra low-hydrogen, moisture resistant steel electrode designed to weld in all positions including vertical down. An excellent electrode for joining and repairing boiler plate, pipe steels, shipbuilding steels and cast steels. Also excellent for welding weathering steels such...

The DUROARC® 77 is an extra low-hydrogen, moisture resistant steel electrode designed to weld in all positions including vertical down. An excellent electrode for joining and repairing boiler plate, pipe steels, shipbuilding steels and cast steels. Also excellent for welding weathering steels such...

Structual and repair welds on high strength fine grained steels. Low alloy, high strength Ac/DC electrode for joining low and medium alloy construction steels. Extra low moisture content is below.14%. Smooth running AC/DC coating operates in all positions. Low spatter yeld, self releasing slag and u...

Ideally suited to the welding of all grades of grey cast iron, particularly thin sections and welds that require highest possible machinability. TYPICAL APPLICATIONS Automotive and truck engine blocks, motor blocks, cylinder blocks and heads, pump housing, transmissions and differential housings, pu...

Duralloy Gasless Flux Cored Wire 0.9mm (1kg) Gasless flux cored for welding Galvanised and Rusty steel

Duralloy Gasless Flux Cored Wire 0.8mm 1kg Gasless flux cored for welding Galvanised and Rusty steel

Superior electrode for extremely tough build-up and under base for hard surfacing. A build-up electrode in the machinable range of hardness providing wear resistance that is far superior to low and medium carbon steel and low alloy steels. Deposits are extremely tough and have a high resistance to i...

Infrared Thermometer Distance to spot size ratio is 30 to 1 at the focal point. Unique flat surface, mini modern housing design. Class II laser to identify the centre point of the area being measured · Max/min memory. Impact-resistant ABS case. Auto data hold when trigger released. Auto power off Â...

The NEOMIG-i 400 G Package includes a NEOMIG-i 400G, Wire feeder, Trolley, Abicor Binzel 4M Torch, 10M Welding Cable and 4m Earth Clamp and Cable. The NEOMIG-i 400 G is a three-phase multi-process generator with a separate hose reel. Its state-of-the-art digital technology and 100% duty cycle ensure...

The TITANIUM 400 AC/DC is a high-performance TIG AC/DC generator (400 A to 60%) designed to offer a wide choice of welding processes (TIG AC, DC, MMA). It can be used to weld all types of materials; mild steel, stainless steel, aluminium, copper, titanium. Also ideal for welding thin gauge, its Puls...