Fazcorp 63 views   8 clicks ♡

Stainless Steel Hanger Bolt used for mounting solar arraysLength 195mmThread M10MaterialsStainless Steel 304 A2-70EPDM Rubber

Stainless Steel Hanger Bolt used for mounting solar arraysLength 300mmThread M10MaterialsStainless Steel 304 A2-70EPDM Rubber

Stainless Steel Hanger Bolt used for mounting solar arraysLength 200mmThread M10Materials304 Stainless Steel 304 A2-70EPDM Rubber

This bracket is part of the solar mounting tilt bracket system is adjustable between 700mm - 1100mm in height and will work with the Front Leg tilt bracket.Solar Mount tilt bracket is supplied with 2 x 75mm dacromet coated wood screws and 2 x EPDM WashersRecommended torque setting for M8 Bolts: 12-1...

Front leg for solar mounting tilt bracket system, one of these brackets is required to work with our 280mm-400mm and 700mm-1100mm tilting brackets.Solar Mount tilt bracket is supplied with 2 x 75mm dacromet coated wood screws and 2 x EPDM WashersRecommended torque setting for M8 Bolts: 12-15NmCompli...

This solar mounting L-Bracket is made from Aluminium and is supplied with a stainless steel wood screw that allows for height to be adjusted.Once the Solar Mounting L-Bracket has been fixed to the roof then you will be able to attached the solar mounting rail.The stainless steel wood screw allows fo...

This bracket is part of the solar mounting tilt bracket system is adjustable between 280mm - 400mm in height and will work with the Front Leg tilt bracket.Solar Mount tilt bracket is supplied with 2 x 75mm dacromet coated wood screws and 2 x EPDM WashersRecommended torque setting for M8 Bolts: 12-15...

Grounding Lug is used for earthing purposes and will work with our mounting rails, the aluminium grounding lug is supplied with a grounding washer, clamp and M8 stainless steel bolt.(Recommended torque setting for M8 Bolt:12-15Nm)It is important to use a corrosion resistant Galvanised/Zinc spray coa...

s are an easy way to keep cabling tidy when setting up your solar array.This clips are made from stainless steel and have been design to clip onto the solar mounting rail or to the frame of the solar panel, each clip can handle up to 4 cables at a thickness of up to 6mm2 (Double insulated cable)

Stainless Steel Solar Grounding Washers are used to bond the solar panel to the mounting rail for earthing purposes.One of these is required between the solar panel and mounting rail at each point where the solar panel has been clamped to the mounting rail.

The Solar Rail Splice is used to join Solar mounting rails together and will only work with our rail profileRecommended torque setting for M8 Bolts: 12-15NmComplies with AS/NZS1170

This direct mounting bracket simplifies the way you fix your solar panels to different surface types, including timber or metal surfaces.The EPDM backing of the bracket is a protective barrier that prevents the aluminium bracket from reacting with either treated timbers or different metal types.Once...

This solar mounting L-bracket is designed to work with our solar mounting rail system and is a strong effective solution for mounting solar panel rails to a corrugated roof profile. The solar mounting bracket will work with many roof profiles and can be mounted directly to timber.On our solar panel...

Solar Panel End Clamp is for clamping the edge of a solar panel to the mounting rail, the end clamp is designed to work with our mounting rail and will work with a framed solar panel that is 30mm thick.Made from Aluminium and is supplied with a stainless steel M8 boltRecommended torque for M8 Bolt:1...

Solar Panel End Clamp is for clamping the edge of a solar panel to the mounting rail, the end clamp is designed to work with our mounting rail and will work with a framed solar panel that is 40mm thick.Made from Aluminium and is supplied with a stainless steel M8 boltRecommended torque for M8 Bolt:1...

Solar Panel End Clamp is for clamping the edge of a solar panel to the mounting rail, the end clamp is designed to work with our mounting rail and will work with a framed solar panel that is 45mm thick.Made from Aluminium and is supplied with a stainless steel M8 bolt.Recommended torque for M8 Bolt:...

Solar Panel End Clamp is for clamping the edge of a solar panel to the mounting rail, the end clamp is designed to work with our mounting rail and will work with a framed solar panel that is 50mm thick.Made from Aluminium and is supplied with a stainless steel M8 boltRecommended torque for M8 Bolt:1...

Solar Panel Inner clamp is for clamping in between panels to mount them to the rail, the clamp is designed to work with our mounting rail and will work with a framed solar panel that is 30mm thick.Made from Aluminium and is supplied with a stainless steel M8 bolt.Recommended torque setting for M8 Bo...

Solar Panel Inner clamp is for clamping in between panels to mount them to the rail, the clamp is designed to work with our mounting rail and will work with a framed solar panel that is 35mm thick.Made from Aluminium and is supplied with a stainless steel M8 bolt.Recommended torque setting for M8 Bo...

Solar Panel Inner clamp is for clamping in between panels to mount them to the rail, the clamp is designed to work with our mounting rail and will work with a framed solar panel that is 40mm thick.Made from Aluminium and is supplied with a stainless steel M8 bolt.Recommended torque setting for M8 Bo...

Solar Panel Inner clamp is for clamping in between panels to mount them to the rail, the clamp is designed to work with our mounting rail and will work with a framed solar panel that is 45mm thick.Made from Aluminium and is supplied with a stainless steel M8 bolt.Recommended torque setting for M8 Bo...

Solar Panel Inner clamp is for clamping in between panels to mount them to the rail, the clamp is designed to work with our mounting rail and will work with a framed solar panel that is 50mm thick.Made from Aluminium and is supplied with a stainless steel M8 boltRecommended torque setting for M8 Bol...

This Remote Meter is designed to work with our MC-Series MPPT Solar Charge Controllers, the Remote Meter allows you to have control of and monitor your Charge Controller from a more convenient or desired location.Unit is Supplied with a 1.5m data cable that plugs into the Charge Controller and Remot...

Battery Temperature sensor for our MC-Series Solar Charge Controllers, this will allow the Charge Controller to read and monitor the battery tempertaure.Please note that a Battery Temperature Sensor is already included with our ML-Series MPPT Charge Controller.