Implements Direct 44 views   11 clicks Claim this Business♡

Overview:Gates XPB 1065 Belt for Mateng FUSM and FUSMA Flail mower 3 pcs required to be added to cart to replace the set of the flail mowerIts recomended to replace as a full set so the belts are all the same length.

Finish Galvanised Notes:Due to the hot dip galvanising process there maybe some surface imperfections or distortion from heat involved.

Finish Galvanised Notes:Due to the hot dip galvanising process there maybe some surface imperfections or distortion from heat involved.

Finish GalvanisedNotes:Due to the hot dip galvanising process there maybe some surface imperfections or distortion from heat involved.

Finish Galvanised Notes:Due to the hot dip galvanising process there maybe some surface imperfections or distortion from heat involved.

Finish Galvanised Notes:Due to the hot dip galvanising process there maybe some surface imperfections or distortion from heat involved.

Del Morino’s new flail mower, Ginger is made in their state of the art factory in Caprese Italy, The Ginger is specifically designed for subcompact tractors from 12-28HP, including Kubota BX2380, BX2680 , John Deere 1023e 1025R 2025R Series , Kioti CS2610 , Massey Ferguson GC1723, New Holland Boom...

Number of Belt 2

Overview:This Belt fits only the Hanmey EFGM series 1.25m flail mower for compact tractors.Belt size 17x940 Li 3 Belts required for mower. It is recommended to replace them as a set as used ones will be stretched. NOTE:Only Fits EFGM model Not EFGC

Overview:Hammer Flail to fit Hanmey EFGM Flail mower for Compact tractors. Note :This flail is only suitable for the Hanmey 1.25m Flail mower for compact tractors, It does not fit the heavy duty models

OverviewReplacement tooth for the 6inch auger for the Sierra Post hole digger. Notes:This bolt on style of tooth is only used on the 6" auger.Does not include bolts

OverviewReplacement Auger fish tail style lead screw for post hole borer auger.This part is what centralises and helps start the auger into the ground , if this is worn or damaged the auger will not perform at its best. Note:For Sierra Post Hole digger augers only

OverviewWeld on Brackets to fit John Deere compact tractor loaders which use the Hook and Pin System , this is common on all 1, 2, 3, and 4 series tractors.You can use these brackets to convert or make your own implements to attach to the front end loader arms on a John Deere compact tractor loader.Supplied in raw steel finish

Top Link suitable for for compact tractor that require a shorter top link , Suit KUBOTA , SHIBAURA, YANMAR, MITSUBISHI , JOHN DEERE, HINEMOTO, SATOH, ISEKI and other small compact tractors with CAT 1 linkages (Top link has 19mm holes both ends)Cat.1 - 1 ball each endMin. Length: 410mm.Tube length: 288mm,Min. Length: 410mm,Max. Length: 595mm,Tractor end ball width 44.5mm

Stabilising Frame (dimensions) 50x 100mmNotes:Please note, this listing is for one with EURO hitch brackets, We also have this available without any brackets on it.

Ferroni MT 300 PTO roller pumpFerroni MT 300 Roller pump with cast iron housing and rotor with nylon rollers, it includes two hose connections,(no hoses included)PTO driven roller pump includes a chain for rigid fastening onto a tractor. it fits directly onto a 540PRM 6 Spline PTO shaft,The MT300 ro...

Ferroni PTO water pump ML20 30/30 Nylon Roller pumpSupplied with 30mm inlet/outlet tailpieces and hoses for watering or water transferThese pumps can be fitted direct to the PTO of a 540 RPM tractor. Features & Benefits - Self-priming pump for high-pressure cleaning or water transfer- Ideal for low-...

Replacement Auger tooth for Sierra Augers, fits augers 9" 12" 15" 18". Includes rubber retainer.

Oil requirement 20 LPM

Tractor 30-60HP NotesShipped with 2 Male ag style quick-release couplings on the hydraulic hoses.

Hitch Plate thickness 10-12 mm NotesMade by Mateng in China,24-month warranty

Hitch 10-12mm steel Notes2-year manufacturers Warranty against faulty materials or workmanshipShipped lubed in a crate ready assembled.

Weight 180 kgNotesShipped with 2 Male ag style quick-release couplings on the hydraulic hoses.