Leadlight Expressions 34 views   6 clicks ♡

Patina copper is a liquid that you brush or rub onto solder or lead to chemically change the colour from silver to copper.

Patina black is a liquid that you brush or rub onto solder or lead to chemically change the colour from silver to black

This is a glass cutting fluid which lubricates the cutting wheel of your glass cutter. The spout makes filling the cutter easy too.

These are fantastic value cutters. They have an oil resevoir, tungsten carbide head and brass “tapping” end, these will last a very long time. Most important with any glass cutter, only score once. Only available in clear.

These glass running pliers make breaking glass accurately a whole lot easier. They are used after scoring the glass with a glass cutter

Glass Breaking and Grozing Pliers are used for breaking glass along the score when it is too small for fingers or running pliers.

Fantastic for removing the rough or sharp edges from glass, especially before foiling, or from tiles before mosaicing. Just one or two strokes is all that is needed on each edge. Can be used to shape glass a little, but is hard going – better to buy a grinder

This lead knife has a curved blade to make cutting lead easier and the weighted head of this knife is designed to be used as a hammer

Leponitt Lead Dykes are really nice side cutters with thin blades especially for cutting lead came and copper wire.

A high quality lead stretching vice by Glastar of the USA. For straightening and stiffening lead cames of most sizes.

A very handy tool, made of a hard plastic. Mainly used to flatten and open up lead came, it is also great for burnishing copper foil and other odd jobs.

Rubber backed metal straight edge for glass cutting in nice straight lines.

High quality Inland 19mm standard grit grinder head. Fits Inland, Glastar, Kristall and most other grinders. These are made in the USA by Inland Craft, are top quality and will last a lot longer than the cheap brands.

1/4″ (6mm) standard grit grinder head for getting into those really tight shapes. Also great for boring and enlarging holes in glass. These are made in the USA by Inland Craft, are top quality and will last a lot longer than the cheap brands. No need to remove the standard head, just fit this over &hellip

The pistol grip glass cutter is great for people who find it hard to apply enough pressure with the pencil grip ones

Horse shoe nails are ideal for holding stained glass projects during assembly. Best used with leadling blocks.

These plastic Lead Blocks are perfect for holding a leadlight under construction. A slot on one side and a tongue for lead on the other

This is a great way to protect your eyes and face from water splashes and glass chips produced by your glass grinder

A Glass "L" Square is made to sit on top of the glass and provide a quick and easy way to score glass at ninety degrees.

These are a pair of spare tips for your running pliers. They are specifically made for the Choice brand running pliers but will fit most brands. They are made of a soft plastic material that gives you a great grip on the glass.

The Grinder 2 Mini G Bit System offers exceptional quality diamond grit available in 1/8" (3.2mm) and 1/4" (6.4mm) diameters with standard grit.

Grinder Bit Quickfit 3/4" Standard Grit replacement bit for Techniglass Grinder and Grinder 2

The Kristall 1S Glass Grinder is a high quality, German made machine and has proven reliability over many years.

Fits the Wella soldering irons only.