Norski 88 views   8 clicks ♡

Stain and Varnish combination products have long been a favorite for changing the color of an item whilst giving it the protection of polyurethane. Based on on our very popular varnish formulation, Norski have now developed Polystain, our version of a stain and varnish in one can.This product is des...

Our Pour In Foam is a liquid version of what is in the cans of expanding foam that are gas charged.Rated at 90% closed cell/10% open cell, it's very slow to take on waterOnce mixed,  with a mechanical mixer, after approximately 30 seconds, the mixture will  expand to up to 20X the volume.  As thi...

Our a two-part penetrating solution which is your 'go to' for rotten or degraded timber. This product is full of solvent which allows the 1:1 mixed solution to soak into timber of any sort and create an epoxy hard coating that will arrest mould, rot and fungus. This is available in a range of sizes ...

Epoxy Carborundum is an epoxy based filler with the inclusion of ‘carborundum chips’,  which means this product, when mixed correctly with it's supplied hardener is resistant to continual sliding or bashing movements against itself.We designed this product for application on the keel of d...

We developed Norski Knot Fill resin specifically for use for filling floor or table knots and imperfections where a super hard result is required. Appearing almost clear, this epoxy solution is perfect for high traffic areas or where that extra resistance is required.  to view the user instructions.

Norski  4 to1 Epoxy Resin is one of our flagship products that has a multitude of uses. Normally used in conjunction with our Norski Glass Cloth for laminating, this epoxy resin will stick to anything and offer a holding power that will impress anyone. Mixed at a 4:1 ratio ( by volume, not weight)...

an oil-based single part product that is a fantastic finish for natural timber. Offering great weatherproof qualities, our varnish is rated as ‘marine grade’ and can be applied to floors, walls, window frames, doors, furniture and even soffits. Its slow curing process (allow 24 hours minim...

Our Doming Resin is one of our more popular products, otherwise known around the world as 'Liquid Glass'. This resin can be used to create the appearance of an article being wrapped in glass. We've been making, selling and supporting this product for over 20 years and the products and articles that ...

an oil-based single part product that is a fantastic finish for natural timber. Offering great weatherproof qualities, our varnish is rated as ‘marine grade’ and can be applied to floors, walls, window frames, doors, furniture and even soffits. Its slow curing process (allow 24 hours minim...

Our Natural Tintable Epoxy Filler is the only tintable filler on the New Zealand market. So not only is this the hardest filler known to man, it can be tinted with our tints/pigments. You can even mix and match tints to achieve your desired colour.Available in a range of sizes to suit your requi...

Available in a range of sizes our White Epoxy Filler is a 2:1 mixed product that when cured is the hardest filler available in the marketplace today. Offering excellent adhesive qualities our product won't shrink or sag and is ideal when a bond or fill is required of 'exceptional strength'.Full bon...

Filler Powder (Q-Cells) are white microscopic glass spheres that can be added to our world famous 421 Epoxy Resin. Once the resin has cured with the filler powder embedded in it, upon being sanded, the microscopic spheres explode. Therefore, you can produce your own filler with it's own consistency....

Similar to the Filler Powder, our Glue Powder can be added to our 4 to 1 Epoxy Resin to create a ‘super sticky’ glue.  This can be very handy when trying to glue something upside down or where you don’t want the glue to move whilst curing. Typically used in a mixing ratio of 1-1.5 parts of Aerosil to 1 part of resinto download the SDS for this product

This kit has an extremely tough hardener for the resin and the contents are designed to offer a repair to knots in floors or tables where extra hard wearing is required. This kit contains:- 312mls of Knot Fill Resin, Brush, Sandpaper, Mixing Sticks and Instructions.You cant pour this resin thicker ...

The ingredients of this kit are as follows:-250ml Polyester Resin, Chopped Strand Matt (140mm x 1M), Brush, Mixing Sticks, Sandpaper and Instructions.Everything that you need to carry out a small polyester fibreglass repair.If you require more matting have a look at our larger kit or you can buy the ingredients all separately.The 'Instructions for use' are included on the back of the box. 

This is the larger of our two Polyester Fibreglass Repair Kits and contains:-500ml Polyester Resin, Chopped Strand Matt, Brush (for resin application), 2 x Mixing Sticks, Cleaning Fluid and Instructions.Everything you need to carry out a slightly larger polyester fibreglass repair. The extra ingredi...

This kit contains:-125ml waxed Gelcoat, Mixing Sticks, Sandpaper and Instructions. Great for touch ups or small repair jobs to any polyester fibreglass item.Campervan, Jetski or Polyester Fibreglass boat or dinghy hull, if you've got scratches or gouges this is your 'go to' fix in a box. Gelcoat is...

A kit that contains all you need for carrying out repairs to your surfboard.Our Surfboard Resin is a clear coat for use with surfboards that have a PU (polyurethane) foam blank. These boards are typically denoted by a wooden stringer running through the board from tip to tail. Epoxy boards donâ€Â...

.Our Epoxy Repair Kit contains 312mls of our famous 'Four to One' epoxy resin and a couple of sample sized bags of 'Filler Powder' and also 'Glue Powder'.The concept of adding 'Filler Powder' or 'Glue Powder' to epoxy resin is that you can adjust the viscosity of the resin and make a glue or filler ...

Our Resin Art Kit is a great way to make a start on your 'Resin Art' project.'Resin Art' is the concept of colouring resin and moving it (normally with a hair dryer) on a surface to create unique patterns. You can apply resin on glass, wood, picture canvass's, pretty much any substrate. Why not have...

Our 8 tints contain pigment which is similar to that held in the paint tint dispensers in paint stores. Pigment can be added up to a ratio of 5%. However, 2.5% is regularly enough colour saturation and therefore 25mls can tint up to a litre of resin. Pigments can be mixed to achieve virtually any c...

Mica Powder offers a metallic appearance to the resin when added, 20 grams is enough to colour between 1 and 3 Litres of resin depending on the depth of colour result you are after. Awesome colour results can be achieved combining Mica Powder with dyes.The product images shown are for illustration purposes only and may not be an exact representation of the product.

When dyes are added to our resin products, the resin changes that colour but you can still see light through the resin. Adding more dye will darken the colour to the point where you virtually shut all the light out, our dyes are particularly strong so a maximum ratio of 2.5% is recommended.to downlo...