Pacific Test Equipment 8 views ♡

Elevate your electrical testing capabilities with the cutting-edge AEMC® Model 404 Clamp-On Meter, now with enhanced photovoltaic functionality. This state-of-the-art instrument is designed to meet the demands of modern electrical professionals, offering precise and reliable measurements across a w...

The TRMS Clamp-on Meter Model 403 provides a new standard for safety and measurement capability not available in any other clamp meter sold today. Safety Rated at 1000V CAT IV, it is safe to operate in all electrical environments. It is rugged enough for the most demanding work environments and will...

The True RMS Clamp-On Meter Model 203 is safety rated at 600V CAT IV. It measures AC DC volts and amps, frequency, continuity, resistance and can also perform diode checks. An Adapter mode allows external sensor inputs to be displayed. The Model 203 includes temperature measurement and is supplied w...

Measure wide range of electrical parameters The Sonel CMP- 01 compact clamp meter is a surprisingly versatile tool. It is used for direct AC and DC current measurement up to 00 A. The additional functions of the device include the measurement of direct and alternating voltages up to 600 V (with the...

The Multifunction Clamp-on Meter Model CM605 is an ideal choice for both process and general industrial markets. It is also the perfect instrument for measuring 4 to 20mA process signals, as well as, the higher currents (up to 100A) associated with general industrial monitoring and troubleshooting...

The SR661 is a range selectable probe that offers 3 switch selectable ranges of 10, 100 or 1000AAC. This probe has a voltage output proportional at the current measured in the jaw of the probe. The SR661 has an integral 6.5 ft (1.98m) lead terminated by BNC connector. The high accuracy and wide freq...

Insulation resistance meter Sonel MIC-2511 may be used to measure the insulation resistance using test voltage up to 2500 V -available at Pacific Test Equipment.

Introducing the MTX 3297Ex: The Ultimate Intrinsically Safe TRMS Digital Multimeter It measures: Voltage Current Resistance (including continuity and semiconductor junction testing) Capacitance Frequency (with duty cycle and pulse width) Temperature AC/DC Current with Clamp (including I/O ratio sele...

The Thermocouple Thermometer Data Logger Model 1822 is a portable, compact digital meter designed for simplicity and one-hand operation

AC/DC digital indicators Digital display Integral rechargeable battery PH3 Proving unit The KD1E/33D is a digital HV potential indicator which can be used to indicate the presence of voltage or make voltage measurements on earthed neutral systems up to 33kV. The potential indicator display is powere...

The KD1E/22 is a neon HV potential indicator suitable for use on earthed neutral systems up to 22kV. A highly robust, portable AC/DC voltage indicator, this potential indicator provides a means of confirming the presence of voltage on earthed neutral electrical circuits. Conforming in design lengths...

The KD1E/19 is a neon HV potential indicator suitable for use on earthed neutral systems up to 19kV. A highly robust portable AC/DC voltage indicator, this potential indicator provides a means of confirming the presence of voltage on earthed neutral electrical circuits. Conforming in design lengths...

The KD1E is a neon HV potential indicator suitable for use on earthed neutral systems up to 11kV. A highly robust, portable AC/DC voltage indicator, this potential indicator provides a means of confirming the presence of voltage on earthed neutral electrical circuits. Conforming in design lengths to...

The Sound Level Meter Model CA832 is designed to assess sound ambiences or annoyances. Available in ANZ through Pacific Test Equipment.

The PR33D is a digital HV potential indicator and phasing stick which can be used to indicate the presence of voltage, make voltage measurements and provide a means of phase comparison at the point of paralleling two circuits, without the interposition of voltage transformers or secondary wiring cir...

The PR15D is a digital HV potential indicator and phasing stick which can be used to indicate the presence of voltage, make voltage measurements and provide a means of phase comparison at the point of paralleling two circuits, without the interposition of voltage transformers or secondary wiring cir...

The PR11 phasing sticks provide a means of phase comparison at the point of paralleling two circuits, without the interposition of voltage transformers or secondary wiring circuits. A neon type instrument, it is designed for use on earthed neutral circuits up to 11kV. Accessories are available, incl...

The Digital/Analog Megohmmeter Model 5060 is the latest design in 5000V insulation testers. Features include automatic calculation and presentation of the Dielectric Absorption Ratio (DAR), Polarization Index (PI) and Dielectric Discharge (DD). The Model 5060 displays the test voltage, insulation re...

The Digital/Analog Megohmmeter Model 5050 is the latest design in 5000V insulation testers. Features include automatic calculation and presentation of the Dielectric Absorption Ratio (DAR), Polarization Index (PI) and Dielectric Discharge (DD). The Model 5050 displays the test voltage, insulation re...

The Megohmmeter Model 6505 is a portable instrument housed in a rugged field case and operates on either battery or line power. It performs voltage, insulation, and capacitance measurements. This instrument contributes to the safety of electrical installations and equipment. Features include automat...

Insulation resistance measurement: – measurement voltage any in the range of 50…1000 V at 10 V and 1000…5000 V at 25 V resolution, – continuous indication of measured insulation resistance or leakage current, – automatic discharge of measured object capacitive voltage after...

Digital FlexProbe® (MiniFlex) An ideal addition to the electrician’s tool kit, the Digital FlexProbe® series can be used for TRMS AC current measurements and are rated at 600V CAT IV. They provide a welcome solution when accessing electrical conductors in difficult and tight places. The Model 40...

The AC Current Probe Model MN93-BK features 10’ leads and 200A capacity. This probe is designed for use with the following instruments: Models 3945/3945-B, 8220, 8230, 8333, 8335, 8336, PEL Series, L104 and L564. Rated current 240A AC Max. clamping diameter: 20mm Lead Length 3m IP30 300V CATIV

Measurement range: 5A: 0.005 to 6AAC, 100A: 0.1 to 120AAC AC current probe for use with Models 3945/3945-B, 8220, 8230, 8333, 8335, 8336, PEL Series, L104 and L564. Rated current 5A & 100AAC Max. clamping diameter: 20mm Lead Length 3m IP40 (jaws closed) 300V CATIV