×
About this listing
Shoppo is an independent New Zealand shopping discovery platform.
We do not sell products ourselves.
Products on this page are sold by Powerbox on their own website.
Clicking "Visit Store" takes you directly to the retailer.
Own this business?
Claim your listing or request removal.
Powerbox 19 views 3 clicks Claim this Business♡
×-
Dunkermotoren E90R Schwach Power-Off BrakeThe E90R schwach is the reduced-torque version of the Dunkermotoren E90R power-off brake, rated at 0.5Nm nominal torque with a torque range of 0.25–0.7Nm over the temperature range on a 24Vdc supply. Dunkermotoren lists it as the preferred series for GR53 motors.Like the rest of the E90R series it...Visit Store 0 0 -
Dunkermotoren E38R Power-Off BrakeThe Dunkermotoren E38R is a spring-force power-off brake that holds a motor axis the instant supply voltage is removed, so vertical loads, positioning stages and gravity-loaded axes stay put through an emergency stop or power failure. Because the holding force comes from a spring rather than a perma...Visit Store 0 0 -
Dunkermotoren E22R Power-Off BrakeThe Dunkermotoren E22R is a 24Vdc power-off brake rated at 0.1Nm nominal torque, with a torque range of 0.1–0.14Nm over the temperature range. It works on the permanent-magnet principle, so the correct supply polarity must be observed at installation.At 22mm diameter and 30mm long, the E22R is the...Visit Store 0 0 -
Dunkermotoren E310R Power-Off BrakeThe Dunkermotoren E310R is a spring-force power-off brake that automatically holds an axis in place the moment supply voltage is removed, with no holding current required to maintain the grip. It is built for applications where an emergency stop, power failure or routine shutdown must never allow a...Visit Store 0 0 -
Dunkermotoren E100R Power-Off BrakeThe Dunkermotoren E100R is a 24 Vdc power-off brake rated at 1.5 Nm nominal torque, with a torque range of 0.75–1.70 Nm over the temperature range. It works on the permanent-magnet principle, so the correct supply polarity must be observed at installation. Dunkermotoren supplies the E100R on reque...Visit Store 0 0 -
Dunkermotoren E105A Power-On BrakeThe Dunkermotoren E105A is a 24 Vdc power-on brake rated at 1.7 Nm nominal torque, with a torque range of 1.50–2.50 Nm over the temperature range. A power-on brake applies torque when it is energised and releases when supply is removed, the opposite of the power-off brakes in the Dunkermotoren ran...Visit Store 0 0 -
Dunkermotoren E600R Power-Off BrakeThe Dunkermotoren E600R is the highest-torque power-off brake in the Dunkermotoren range, rated at 7 Nm nominal torque on a 24 Vdc supply with a torque range of 7.00–9.00 Nm over the temperature range. It is based on spring force, a design that is particularly robust and insensitive to temperature...Visit Store 0 0 -
Dunkermotoren E300A Power-On BrakeThe Dunkermotoren E300A is a 24 Vdc power-on brake rated at 2.5 Nm nominal torque, with a torque range of 1.50–3.50 Nm over the temperature range. A power-on brake applies torque when it is energised and releases when supply is removed: the opposite of the power-off brakes in the Dunkermotoren ran...Visit Store 0 0 -
Dunkermotoren E50A Power-On BrakeThe Dunkermotoren E50A is a 24 Vdc power-on brake rated at 0.4 Nm nominal torque, with a torque range of 0.25–0.60 Nm over the temperature range. A power-on brake applies torque when it is energised and releases when supply is removed. This is the opposite of the power-off brakes in the Dunkermoto...Visit Store 0 0 -
Dunkermotoren E605A Power-On BrakeThe Dunkermotoren E605A is a 24 Vdc power-on brake rated at 4.5 Nm nominal torque, with a torque range of 4.00–8.50 Nm over the temperature range: the highest-torque brake in the power-on series and the widest torque band in the whole brake range. A power-on brake applies torque when it is energis...Visit Store 0 0 -
Dunkermotoren E46A Power-On BrakeThe Dunkermotoren E46A is a 24 Vdc power-on brake rated at 0.3 Nm nominal torque: the entry point of the power-on series. A power-on brake applies torque when it is energised and releases when supply is removed: the opposite of the power-off brakes in the Dunkermotoren range. It is specified where b...Visit Store 0 0 -
Jack Fuse Safety Call Point (SCP)The Jack Fuse SCP Safety Call Point is a manual alarm button built for the moments an activation absolutely has to get through — duress, lockdown and assistance calls on security and access-control systems. Where a standard call point is a single switch on a single pair of wires, the SCP is engine...Visit Store 0 0 -
Dunkermotoren E90R Power-Off BrakeThe Dunkermotoren E90R is a spring-force power-off brake that holds a motor axis the instant supply voltage is removed, so vertical loads, positioning stages and gravity-loaded axes stay put through an emergency stop or power failure. Because the holding force comes from a spring rather than a perma...Visit Store 0 0 -
Dunkermotoren RE22 Series Incremental EncoderThe Dunkermotoren RE22 series offers two compact magnetic incremental encoders designed to mount directly to Dunkermotoren BG and GR brushless DC motors, adding quadrature position feedback to motor platforms that would otherwise run open-loop. Both operate contact-free with no wear and share the sa...Visit Store 0 0 -
Dunkermotoren RE20 Incremental EncoderThe Dunkermotoren RE20 is a magnetic incremental encoder designed to mount directly to Dunkermotoren GR and BG brushless DC motors, adding quadrature position feedback to higher-power motor platforms for closed-loop speed and direction control. It operates contact-free with no wear parts, delivering...Visit Store 0 0 -
Dunkermotoren AE65 Absolute EncoderThe Dunkermotoren AE65 is an absolute encoder that reports true shaft position the moment the drive powers up, so the axis is referenced immediately — with no homing move or reference run at start-up.It sits inside the motor’s own profile housing rather than mounting as a separate unit, and feed...Visit Store 0 0 -
Dunkermotoren AE38 Absolute EncoderThe Dunkermotoren AE38 is a battery-free absolute encoder that reports true shaft position the instant the drive powers up — with no homing move or reference run before the axis can be trusted.It integrates inside the motor’s own profile housing rather than bolting on as a separate unit, without...Visit Store 0 0 -
Dunkermotoren MR1 Integrated Incremental EncoderThe Dunkermotoren MR1 delivers integrated position and speed feedback from inside BG75 dCore and BG95 dCore motors, with 1,024 ppr (4,096 cpr) resolution over an internal A/B/I interface — all without adding a separate encoder housing or mounting point.With the MR1 drawing its supply directly from...Visit Store 0 0 -
Dunkermotoren RE56 Series High-Resolution Incremental EncoderThe Dunkermotoren RE56 and RE56TI are high-resolution incremental encoders that deliver quadrature position and speed feedback for closed-loop motion control. With up to 2,000 pulses per channel and 8,000 counts per revolution, they give control systems the resolution needed to hold precise shaft po...Visit Store 0 0 -
Dunkermotoren AFS58 Functional Safety EncoderThe Dunkermotoren AFS58 is a functional safety encoder certified to SIL 2 and PL d, built for applications where a feedback fault must be detected and handled as part of the machine's safety function rather than by a separate safety device.It mounts directly to Dunkermotoren's BG brushless DC motor...Visit Store 0 0 -
Dunkermotoren RE30 Series Incremental EncoderThe Dunkermotoren RE30 incremental encoder series provides contact-free quadrature position feedback for the GR 30, GR 30S, GR 42, GR 53, GR 63, GR 80, BG 32 dCore, BG 32 KI, BG 42 dCore, BG 45, BG 62 dCore, BG 65, BG 66, BG 75, and BG 95 dPro motor series — the widest motor compatibility of any e...Visit Store 0 0 -
Dunkermotoren ME52 Magnetic Pulse GeneratorThe Dunkermotoren ME52 is a magnetic pulse generator that works contact-free and wear-free using Hall sensors and a magnetic ring. It provides 2 ppr or 12 ppr (8 or 48 cpr) depending on version, with open collector plus pull-up output and two square-wave signals 90° phase shifted. The ME52 is compa...Visit Store 0 0 -
Dunkermotoren MG2 Magnetic Pulse GeneratorThe Dunkermotoren MG2 is a magnetic pulse generator that works contact-free and wear-free using Hall sensors and a magnetic ring, providing two square-wave signals with 90° phase shift for speed and direction sensing. Resolution depends on motor pairing: 2 ppr (8 cpr) on the G 30 and hooded GR 42 b...Visit Store 0 0 -
Delta Electronics MEA-300A24C HAA Medical AC/DC AdapterThe Delta MEA-300A24C HAA is a medical AC-DC desktop adapter designed for systems that require a regulated 24Vdc output at up to 12.5A. It provides 300W output power from a universal 90-264Vac input range and uses an IEC 60320 C14 input socket, making it suitable for equipment deployed across differ...Visit Store 0 0
×