Racer Products 305 views ♡

REAR SPOILERThis Bell rear spoiler is suitable for the Bell HP7, RS7 and KC7-CMR helmets. The spoiler attaches to your helmet using strong double sided adhesive so once its on it will stay on. It has been designed to help improve the overall aerodynamic performance of your helmet, whilst at the same...

NOTE Currently is an order in product from Nuke In Sweden. Takes Roughly 3-4 weeks to order inCheck out the Nuke website to see what else they offer and more info https://www.nukeperformance.com/Listing is for:1x O-ringReplacement O-ring for 14mm injectors such as Bosch, Siemens, SMP, Weber, Denso...

Tilton’s popular 3-chamber plastic reservoir is value-packed, incorporating many features found in the billet aluminum version at a price that meets most budgets. There is no longer a reason to use three separate plastic reservoirs–this reservoir combines the three into one convenient package. 3...

Listing is for:1x Seat slider set to suit one seat- Suitable for OMP subframes and seat mounts- Enables seat to be adjusted forwards and backwards- Steel constructionSliding rail kit to be mounted between the brackets and the seat.Not FIA approved.Colour: Black

The OMP Tow Rings are made from stainless steel and painted yellow. The towing rings have an M12 x 1.75 threaded pin to enable them to be bolted through a bracket, subframe or similar.The 50mm tow ring is constructed from 6mm round steel.- Can be used on competition cars and also track day cars- Pai...

Constructed from a lightweight but high strength fabric webbing, the OMP fixed tow strap provides a quick and visible solution to track side vehicle recovery.The OMP Tow Strap features OMP branding and eye catching red webbing for easier sight at the track and features a high quality robust bracket...

Designed to be bolted to the front or rear of the car this flat tow hook from OMP is constructed from 6mm thick aluminium making it both strong and lightweight.Dimensions - 216mm overall length, 50mm ID hole, 140 x 40mm mounting flange

The OMP steel low profile seat side mounts are made from 3mm powder coated steel. They offer a wide range of mounting holes that allow you to position your seats exactly where you want them.- These side mounts will also fit Sparco, Cobra and Sabelt seats- Multi drilled so you can get a perfect seati...

KART RIB PROTECTORThis rib vest uses triple-layer foam to absorb impact and reduce discomfort in high-intensity karting. Designed for secure fit and easy handling.Laser cut micro holes located on strategical areas for improved breathability and temperature control (AirFlow System)Triple-layer foamVe...

The OMP Rib Protector features a simple but effective design made from a lightweight shockproof fabric ensuring maximum protection and comfort. Easy to adjust for a better fit.

IMPACT RESTRAINT Expiry December 20282.000" Lap2.000" ShouldersLever and Latch5 Point

2.000" over Shoulders 3.000" Lap

IMPACT RESTRAINT - Expiry December 20283.000" Latch and Link Lap2.000" ShouldersLeft Side Ratchet5 Point

Impact Nomex® balaclava not only provides direct heat and thermal transfer protection for the face and neck, it also provides additional protection against smoke and fume inhalation. Manufactured from a moisture wicking soft-knit Nomex® and handcrafted with a flat-seam interlocking stitch for enha...

Replacement master cylinder pushrods for Tilton 75 - 76-Series master cylinders.75 and 76-Series (3.9" overall length) 75 and 76-Series (6.0" overall length)75 - 76-Series MC, M8 x 1.25, 6" long

Tilton’s 4200-Series hydraulic release bearings feature a 44mm (1.75″) radius-face contact diameter bearing for use with flat-finger clutch diaphragm springs. Designed for use with Tilton 7.25" clutches, and suitable for use with many non-Tilton 5.5″ & 7.25″clutches, the 4200-Series hydrauli...

Tilton’s 4300-Series hydraulic release bearings feature a 38mm (1.50″) radius-face contact diameter bearing for use with flat-finger clutch diaphragm springs. Designed for use with Tilton 4.5" & 5.5" clutches, and suitable for use with many non-Tilton 4.5" & 5.5″ clutches, the 4300-Series hydr...

Tilton’s 5200-Series hydraulic release bearing (also known as a hydraulic throwout bearing) features a 44mm (1.75″) radius-face contact bearing diameter. Ideal for 5.5″ – 7.25″ clutches, the 5200-Series hydraulic release bearing is optimal for direct mounting inside the bellhousing.Mount:...

Tilton’s flow control valve may look like a fairly insignificant part, but it’s actually one of the smartest purchases any racer can make. By allowing the clutch to slip slightly during quick engagements, the flow control valve reduces shock loads to the driveline, lowering the chance of losing...

The Bell Medium Trolley Bag is crafted for racers and enthusiasts, making it perfect for race weekends or trips. It's spacious enough to hold all your race gear, including a helmet.- Lightweight and Durable Fabric: Ensures your gear is protected while making the bag easy to carry.- Secure Zipper wit...

The Bell Large Trolley Bag is designed for racers and enthusiasts alike. It's practical for race weekends or long trips away and is large enough to carry all your race gear including a helmet and much more.Key Features and Benefits:- Lightweight and Durable Fabric: Keeps your gear safe and secure, b...

With excellent cold performance & bite, high resistance to fade, frictional stability throughout all operating conditions, reduced pad & disc wear and low dust levels, the all new HP2000 friction material offers significant advantages over its rivals.Designed to be a direct replacement for the Origi...

Grayston 4mm Universal Race & Rally Mudflaps – Pair (50cm x 30cm)Tough protection for serious track and rally builds.These Grayston 4mm mudflaps are made from ultra-durable polypropylene, designed to take on gravel, tarmac, and everything in between. Supplied in a universal 50cm x 30cm size, they...