3d Shop 1 views Claim this Business♡

1x.(Printed parts not included)Compatible with models using the Bambu lab MH010 kitSpeed Boat for 010 Wind Up Boat Motor by 3Dimension CustomsBoat Model 010 - The windup-motor boat by vandragon deSpeedboat Benchy for Components Kit 010 by NxtGnPrtHub 

PLA infused with natural wood fibres.Material: PLADiameter: 1.75mmWeight: 0.5kg / packRecommended Printing Settings Print Layer Height 0.2mm Nozzle Temp 180°C - 220°C Heated Bed Temp 25-60°C Printing Speed 40~60 mm/s 

Material: PLADiameter: 1.75mmWeight: 0.5kg / packPLA containing a small amount of real metal powder.Recommended Printing Settings Print Layer Height 0.2mm Nozzle Temp 180°C - 220°C Heated Bed Temp 25-60°C Printing Speed 40~60 mm/snote - PLA metal filament contains metal additives that ma...

PVA natural coloured Support FilamentUse as a support filament with PLA to get perfect overhangs and bridgesDissolves in waterM aterial: PVADiameter: 1.75mm /- 0.03mmNet Weight: 1kg / packRecommended Printing Settings Print Layer Height 0.2mm Nozzle Temp 190°C - 230°C Heated Bed Temp 40-60°C Printing Speed < 50 mm/s 

High Impact Polystyrene (HIPS) is a dissolvable support material commonly used with ABS and ASA. It can be dissolved in d-Limonene, leaving your print free from marks caused by support removal.An enclosed chamber is recommended to prevent warping while printing.Air filtering and/or ventilation is re...

Material: ASADiameter: 1.75mmWeight: 1kg / packASA is similar to ABS, with the added advantage of UV resistance. It is suitable for use outdoors.An enclosed chamber is recommended to prevent warping while printing.Air filtering and/or ventilation is requiredRecommended Printing Settings Print Layer ...

Material: ASADiameter: 1.75mmWeight: 1kg / packASA with chameleon colour effectASA is similar to ABS, with the added advantage of UV resistance. It is suitable for use outdoors.An enclosed chamber is recommended to prevent warping while printing.Air filtering and/or ventilation is requiredRecommende...

Hardware parts kit for building a 3D printed jet engine model.(Printed parts not included)Contains -80x M2.5x10 SHCS80x M2.5 Stainless Steel Hex Nut150x M2.5x5x0.5 Stainless Steel Flat Washer2x 6204-2RS Ball Bearing2x 6003RS Ball BearingCompatible with models using the Bambu lab MH006 kit3D Printable Jet Engine by CATIAV5FTW3d Printable Turbojet Engine by linus3d 

Hardware parts kit for building a 3D printed Marble run.(Printed parts not included)Contains -1x USB powered motor12x Plastic marblesCompatible with models using the Bambu lab 003 kitMarble Run 003 by Bambu Lab  

Hardware parts kit for building a 3D printed Card Shuffler.(Printed parts not included)Contains -40x Self Tapping Screws12x MR128ZZ Ball Bearings10x O RingsCompatible with models using the Bambu lab ZH008 kithttps://makerworld.com/en/models/497170-card-shuffler by Josh-3DNote:If the screws are not going in easily, make the holes bigger with a 2mm drill bit. 

Hardware parts kit for building a 3D printed Apex Legends Wingman.(Printed parts not included)Contains -5x 0.6x8x80mm Spring20x 3x10 BHCS Self Tapping Screw20x 3x16 BHCS Self Tapping ScrewCompatible with models using the Bambu lab ZH018 kitApex Legends Wingman with Reload Mechanics by G-Man Projects

Acid Free Activated carbon pellets for air filtering 700 gramsSuitable for using in nevermore, bentobox or similar 3d printed air filtersAir filtering is required when printing ABS and ASACarbon is very dusty, please use appropriate PPE when handling.

Material: ASADiameter: 1.75mmWeight: 1kg / packASA with added glitterASA is similar to ABS, with the added advantage of UV resistance. It is suitable for use outdoors.An enclosed chamber is recommended to prevent warping while printing.Air filtering and/or ventilation is requiredRecommended Printing...

High ToughnessOur PLA provides excellent toughness and impact resistance, preventing breakage under high pressure and impact.M aterial: PLADiameter: 1.75mm /- 0.03mmWeight: 1kg / pack Recommended Printing Settings Print Layer Height 0.2mm Nozzle Temp 210°C - 235°C Heated Bed Temp 55-65°C Printing Speed < 300 mm/s 

Material: ASADiameter: 1.75mmWeight: 1kg / packASA is similar to ABS, with the added advantage of UV resistance. It is suitable for use outdoors.An enclosed chamber is recommended to prevent warping while printing.Air filtering and/or ventilation is requiredRecommended Printing Settings Print Layer ...

Parts printed in ABS are more heat resistant than PLA or PETG.An enclosed chamber is recommended to prevent warping while printing.Air filtering and/or ventilation is requiredMaterial: ABSDiameter: 1.75mmWeight: 1kg / packRecommended Printing Settings Print Layer Height 0.2mm Nozzle Temp 220°C - 240°C Heated Bed Temp 90-110°C Printing Speed < 200 mm/s 

Material: ABSDiameter: 1.75mmWeight: 1kg / packParts printed in ABS are more heat resistant than PLA or PETG.An enclosed chamber is recommended to prevent warping while printing.Air filtering and/or ventilation is requiredRecommended Printing Settings Print Layer Height 0.2mm Nozzle Temp 220°C -...

Silk PLA with two colours coextruded, showing different colours when you look at your prints from different anglesM aterial: PLADiameter: 1.75mm /- 0.03mmWeight: 1kg / pack Note:-The spool type may not match the photos, these currently come on a mix of plastic and cardboard spools.-The shades of the...

PLA that changes colour with heat. (Transition point ~33°C)Material: PLADiameter: 1.75mmWeight: 1kg / packRecommended Printing Settings Print Layer Height 0.2mm Nozzle Temp 190°C - 220°C Heated Bed Temp 25-60°C Printing Speed 40~250 mm/slinks to example prints-Baby Gemstone Dragon by...

M aterial: PETGDiameter: 1.75mm /- 0.03mmWeight: 1kg / pack Recommended Printing Settings Print Layer Height 0.2mm Nozzle Temp 230°C - 250°C Heated Bed Temp 70-90°C Printing Speed < 100 mm/sNotes:The previous line of Kingroon PETG has been discontinued, some of the colours may be diff...

PETG in colours to go with your favourite tool brands. Similar to SKU Tool Blue Makita PETG906 Tool Green Ryobi PETG907 Tool Red Milwaukee PETG910 Tool Yellow DeWalt PETG905M aterial: PETGDiameter: 1.75mm /- 0.03mmWeight: 1kg / pack Recommended Printing Settings Print Layer Height 0.2mm Nozzle Temp 220°C - 250°C Heated Bed Temp 70-90°C Printing Speed < 100 mm/s 

The packaging of these rolls has been damaged in transit from the factory.The bags are no longer sealed so the filament may have absorbed moisture from the air. The box may also be damaged/missing.After drying in a filament dryer they will print like normal.These will need to be thoroughly dried bef...

Flexible PLA suitable for printing "Airless" Basketballs which have similar bounce to a real basketballRecommended print files for Airless Basketballs:https://makerworld.com/en/models/1408635-airless-basketball-final-versionhttps://makerworld.com/en/models/141676-airless-basketball-v2https://makerwo...

The Filament starts at 90A Hardness but once it is printed the resulting part is 75A Hardness.This improves the printability, making it possible to print softer objects.It is marketed for printing flexible shoes, but can be used for anything requiring soft filament.Material: ShoeFlex 9075ADiameter: ...