Buzz Audio 1 views Claim this Business♡

Well priced general purpose screw on 1.35" diaphram titanium compression driver with a 1 inch throat. The screw on thread is the standard M35 or 1.4 inch diameter. Rated at 100W peak power and 8 ohms. These drive units are fairly heavy (0.6kg) and it is recommended they are supported when used with ...

A titanium 1" voice coil dome tweeter coupled to a "bullet" style horn assembly used for high frequency reproduction in PA speakers. The frequency response extends down to 1.5kHz but the recommended crossover frequency for best reliability is 5kHz. Connection via Faston connectors or solder. - 120 ...

A complete high frequency horn assembly with a 160 watt (peak) 8 ohm titanium drive unit. The horn features strong ABS construction and a 15oz 1.35" magnet structure. Connection via 6.35mm tabs or solder. Recommended minimum crossover frequency is 1.5kHz. (It is recommended that the drive unit is su...

Economical high power 1.35" dia titanium dome bolt on compression driver with a 1 inch throat. Rated at 200W peak power and 8 ohms. These drive units are fairly heavy (0.6kg) and it is recommended they are supported when used with plastic horns. - 100dB@1W/1M- Rated at 200W peak power- 25mm throat diameter- 4x M4 mounting holes on a 76mm dia outline- Robust spring terminals for connection

High quality 1.75" titanium dome bolt on compression driver rated at 400W (peak) and 8 ohms. These drive units are heavy (1.5kg) and it is recommended they are supported when used with plastic horns. - 100dB@1W/1M- Rated at 400W peak power- 25mm throat diameter- 4x M4 mounting holes on a 76mm dia outline- Robust spring terminals for connection

A 1.4 inch (35.6mm) throat 8 ohm high frequency titanium compression driver with a 65mm voice coil from SB Audience. This driver is a good choice for vocal foldback speakers and midrange bins because of it's high sensitivity in the upper vocal range. Pair with the SBA H280 constant directivity 1.4" ...

A compact high output 1 inch (25.4mm) throat 8 ohm high frequency compression driver for sound reinforcement and instrument speaker applications from SB Audience. This driver is perfect to replace a blown horn in low power applications such as keyboard and small PA speakers. It will fit most standar...

A 1 inch (25.5mm) throat 8 ohm high frequency compression driver for sound reinforcement applications from SB Audience. A good general purpose titanium driver to pair with the SB Audience horn flares or as a replacement driver in sound system applications. These drivers are made to exacting standard...

A 1 inch (25.4mm) throat 8 ohm high frequency compression driver for sound reinforcement applications from SB Audience. The PEEK diaphragm material offers a smooth frequency response out to 20kHz making this driver very nice for all sound system and hi-fi applications. All SB Audience products are m...

A compact 1" (25.4mm) throat constant directivity high frequency horn flare for sound reinforcement applications from SB Audience. This flare has a myriad of mounting holes options to suit just about any compression driver.View the datasheet - 1" throat entry- 223mm square outside dimension- 80° x ...

A medium format 1" (25.4mm) throat constant directivity high frequency horn for sound reinforcement applications from SB Audience. Standard 4x M6 bolt holes on a 76mm diameter circle that will match with SB Audience and other compression drivers.View the datasheet - 1" throat entry- 250mm square out...

A large format 1.4" (35.6mm) throat constant directivity high frequency horn for sound reinforcement applications from SB Audience. The M6x19.5 mounting slots will match compression drivers with 76mm or 102mm diameter mounting circles.View the datasheet - 1.4" throat entry- 280mm square outside dime...

A generic rectangular high impedance Piezo type high frequency horn based on the original Motorola drivers. - Panel cut out 158 x 55- Mounting holes on 170x64mm pattern- Flange size 187x79mm- Solder or Faston connection- 2-20kHz frequency response- 50W power rating

An economical high frequency horn with a 1.35" titanium compression driver useful as a replacement for blown speakers or new builds. - 140W max program power- 8 ohms- 100dB 1W/1M- Recommended lowest crossover = 2kHz- Panel cut out 140x55mm- Mounting holes 170x67.5mm

A 1 inch (25.4mm) throat 8 ohm high frequency compression driver for sound reinforcement applications from SB Audience. The PEEK diaphragm material exhibits a very smooth frequency range out to 20kHz so you can expect a detailed sound from this drive unit when paired with the SD Audience horn flares...

A 1 inch (25.4mm) throat 8 ohm high frequency compression driver for sound reinforcement applications from SB Audience featuring a Neodymium magnet and a Polyether Ether Ketone diaphragm for high sensitivity. A really smooth frequency response when matched to the SB Audience horn flares for a detail...

A complete high frequency horn assembly with a 220 watt (peak) 8 ohm titanium drive unit. The horn features strong ABS construction and a 24oz 1.75" magnet structure. Connection via 6.35mm tabs or solder. Recommended minimum crossover frequency is 1kHz. It is recommended that the driver unit is supp...

A 1.4 inch (35.6mm) throat 8 ohm high frequency titanium compression driver with a 65mm dia voice coil from SB Audience. This driver features a neodymium magnet for low weight and high output. It exhibits a very smooth frequency response through the 1kHz to 20kHz range. Pair with the SBA H280 consta...

A 1.4 inch (35.6mm) throat 8 ohm high frequency compression driver for sound reinforcement applications from SB Audience featuring a light weight Neodymium magnet and a Titanium diaphragm for high sensitivity. A really smooth frequency response with a recommended crossover frequency of 1kHz. These d...