Mount Performance Parts 1 views Claim this Business♡

Four Port4 x 1/8 NPT ports

3 port boost control solenoids are the go-to for the majority of boost control, they allow for accurate control of boost and boost levels can be raised to around 2-3 times the spring pressure of the wastegate.

High Pressure sensor for Liquid. Use for Fuel, Clutch, Brake. - 140 Bar/2030PSI- 45degree cone seat- M10x1 Thread- Includes mating connector kit Technical Specs:Up to 2030 PSI above atmospheric pressure, cannot be used to read vacuum

MAPMAP Sensor capable of reading up to 3 Bar (2 Bar of boost)

MAP Sensor capable of reading up to 4 Bar 3 Bar of boost

The 5 Bar MAP Variohm Eurosensor reads up to 4 Bar absolute pressure.This means that it is suitable for turbo or supercharged applications running up to 4 Bar (or 58psi) of boost pressure. - Includes Plug and Pins- Push wire through connector; crimp on terminal; pull wire/terminal back into connecto...

The 8 Bar MAP Variohm Eurosensor reads up to 7 Bar absolute pressure.This means that it is suitable for turbo or supercharged applications running up to 7 Bar (or 101psi) of boost pressure. - Includes Plug and Pins- Push wire through connector; crimp on terminal; pull wire/terminal back into connec...

/8" BSP complete with plug and terminals. Aluminium and steel, weld in, mounting bosses available

Complete with plug and terminals. Aluminium and steel weld in mounting bosses available

Link’s CAN-Lambda is an easy to use CAN-module that provides digital wideband sensor control via CAN bus and is compatible with leading aftermarket ECUs.Features:The CAN-Lambda’s ability to measure the proportion of oxygen in exhaust gases makes it an essential tool for accurately tuning fuel mi...

Two sensors in one - Combined 10 bar (145 psi) Liquid Pressure sensor and -40 to 140 deg C L Liquid Temperature sensor. - Suitable for Oil, Coolant, Fuel, Transmission fluid.- Up to 10.0 bar (145PSI/1000kpa) Pressure Sensor for Liquid- -40 to 140°C (-40 to 284°F) Temperature sensor for Liquid- 45degree cone seat, M10x1 fitting- Includes Bosch Trapez 4-pin mating connector kit

Complete with plug and terminals. Aluminium and steel, weld in, mounting bosses available

- Includes 2-pin Deutsch DTM connector kit- Aluminium and steel weld in mounting bosses available- 1/8" BSP Thread

Ethanol Content Sensor measures the ratio of ethanol to petrol in a flex fuel vehicleComes with AN-6 fitting.

Link's new G4 external E-throttle (Drive by Wire) module works with Link's G4 Storm, Kurofune and PlugIN ECUs to give you full control of your throttle setup, allowing a faster more precise throttle response.Replace your old mechanical throttle linkage with an advanced electronic throttle module. E-...