Racer Products 209 views Claim this Business♡

Exclusive: Racer Products supplied columns are LVVTCA approved.The SCA700 is a housed upper steering column used in Sprint Cup, the Australian V8 Supercars, the New Zealand Supertourers and other racing series around the world. A steel torque tube rotates inside a lightweight aluminum jacket, with a...

Billet Aluminium mounting clamp used to mount WOODWARD SCA700 Steering Columns.Supplied either as 1 Hole or 3 Hole.Fastening supplied

Since 1989, Woodward steering universal joints have been the preferred choice of race car builders everywhere, and have won every major race and series championship in North America many times over, including the NASCAR championship. Woodward pioneered the use of caged needle rollers with a slight p...

DASH BAR BRACKETS are infinitely adjustable for any driver position. Aluminum, very light, very rigid and secure, suits tube size 1.750" or 40 mm.Note: If using 1.500" Tube, use a small length of 1.750", 0.125" wall.BRACKET PAIR 4-1/2 centers.Clamps to 1-3/4 tubing MB177Clamps to 40mm tubing MB177-4...

STEERING WHEEL ADAPTER for Momo, Sparco and other European steering wheels with 6 x 70 mm bolt pattern. Kit includes both standard and countersunk Torx Plus screws. Less than 9 mm thick, this part is very strong and will fit any steering hub with the US pattern of 3 x 5/16 on a 1.75 bolt circle.

QUICK RELEASE with 3-inch (75mm) ALUMINUM pull ring includes weld-on adapter for 3/4 inch tubing, bolts, washers and SFI 42.1 certification sticker

Woodward QUICK RELEASE with QR697 flange installed. The flange will accept Momo, Sparco, OMP and other European steering wheels with a 6 x 70mm bolt circle.The kit includes Torx Plus screws for both straight and countersunk holes.

SHAFT HANGER for TUBING is a 3/4‚ RH male rod end with an oversize (.757) bore to pass tubing (unlike bar stock and bolts, which have clearance, tubing is slightly oversize and will not pass through a standard rod end). Includes two jam nuts

FIREWALL BUSHINGS with steel flanges, aluminum ball and Delrin sleeve are direct replacements for 3/4 inch industrial flange bearings.3 bolts SBC12-32 bolts SBC12-2LIGHTWEIGHT MINI-BUSHING is all aluminum with a Delrin liner and a full-floating ball, sealed with o-rings. Very high operating angle; requires a 1.50 hole.SBC6-2Bushing bores are sized for the SL17 and SL20 shafts.

SBC80-1 JACKET CLAMP fits SCA700, for use with MB brackets below. Hardware included.SBC80-3 JACKET CLAMP fits SCA700, 3-hole adjustable, for use with old style welded dash brackets. Hardware included. Can be used to mount dash.

Exclusive: Racer Products supplied columns are LVVTCA approved.The SCA700 is a housed upper steering column used in Sprint Cup, the Australian V8 Supercars, the New Zealand Supertourers and other racing series around the world. A steel torque tube rotates inside a lightweight aluminum jacket, with a...

SPLINED SHAFTS with one end machined with a locking groove for the set screws and the other end left blank for cutting to length and machining by user. Last digit of part number is overall length in inches.

Double Universal Joints Double U-joints neatly solve problems that cannot be dealt with any other way. However, unlike a single u-joint, a double joint does not make a stable connection between two shafts because it essentially adds a shaft. Therefore the two shafts to be joined by a double u-joint ...

ST201A, For 3/4 OD x.065 wall Tube