Vinny Fab 83 views Claim this Business♡

Welcome to Fab Supply & Co, your go-to source for high-quality welding consumables and New Zealand’s exclusive Everlast Welders distributor.Titanium AN Male FittingAvailable in: - 4AN- 6AN- 8AN- 10AN- 12AN- 16AN

10AN heater hose adaptor fitting for the rear of the thermostat housing on Nissan RB Engines.Compatibility:- Nissan RB20DE, RB20DET- Nissan RB25DE, RB25DET (Including Neo)- Nissan RB26DETT- Nissan RB30ET, RB30DETPlease note - the adaptor fitting is not compatible with factory Holden RB30 engine moun...

Push-in blanking plug to replace the PCV valve on many models of Nissan engines.Application:- S14 Silvia 200sx- S15 Silvia 200sx- T30 X-Trail (SR20vet)- R33 Skyline (RB25)- R34 Skyline (RB25de)- R34 Skyline (RB25det)- R35 GTR (11/2007 to 01/2008)- WC34 Stagea (RB25)- C34 Laurel (RB25)- C35 Laurel (R...

8AN VCT oil return adaptor compatible with Nissan RB25DET & RB25DE engines. The VCT oil drain sits just in front of the exhaust manifold and helps to drain excess oil from the head of the engine.Supplied complete with fasteners & Viton o-ring.CNC machined from billet 6061-T6 aluminium in Napier, New...

10AN to 3/4 NPT thread to suit Nissan RB blocks for oil drain.This NPT adaptor screws directly into your RB20, RB25, RB26, RB30 block to give you an 10AN size oil return line from your turbo.High quality fitting, available in black.

Quality USA made 38mm (1.5") breather filter with rubber clamp on neck.Measurement is ID of neck.

1/2"NPT thread to 1/2" (12.7mm) hose barb fitting.Great for fitting a breather hose to our Mazda Rotary Oil Filler Necks.High quality product, finished in the full 7 coloured anodising range.

High flow fuel rail adaptor used for fitting an aftermarket fuel pressure regulator to an engine.Bolt hole centres: 32mmColour: BlackThread: 1/4" NPTO-ring: 11mmFasteners: IncludedSuits the following engines:Mazda 13Brew - FD3S RX7 Series 6Nissan SR20DET - S13, S14, S15 SilviaNissan RB26DETT - BNR32...

Adjustable from AN3 to AN16, our spanner is designed to assemble AN fittings without damage.CNC machined from billet 6061-T6 aluminium here in our Napier, factory and anodised black for a great look and corrosion resistance.

M18x1.5 (male) to -10AN (male) adaptorModified M18 thread length to suit our Setrab oil coolers.Black anodised aluminium.High quality fitting.

High quality black braided hose with pre-crimped stainless steel hose ends.21" Long3AN Female straight fittings both endsSuitable for brake lines (offroad use only), clutch lines, gauge lines.

Push-in 10AN rocker cover fittings for Nissan RB26DETT engines.CNC Machined from billet 6061-T6 aluminium and black anodised for great looks and light weight.Complete set with two 10AN fittings, 1/4" BSP Plug for blocking PCV valve, and installation tool to prevent damaging the fittings when they ar...

Push-in 8AN, 10AN or 12AN rocker cover fittings for Nissan RB20DE, RB20DET, RB25DE and RB25DET engines, including the later model Neo RB engines.CNC Machined from billet 6061-T6 aluminium and black anodised for great looks and light weight.Complete set with two 8AN, 10AN or 12AN fittings and install...

Push-in 12AN rocker cover fittings for Nissan RB26DETT engines.CNC Machined from billet 6061-T6 aluminium and black anodised for great looks and light weight.Complete set with two 12AN fittings, 1/4" BSP Plug for blocking PCV valve, and installation tool to prevent damaging the fittings when they ar...

4AN turbo oil feed adaptor with slotted bolt holes to suit turbos with 35mm to 40mm bolt hole centres.CNC machined from billet 6061-T6 aluminium in Napier, New Zealand, and anodised black for great looks and corrosion resistance.

1/4" NPT turbo oil feed adaptor with 40mm bolt hole centres.CNC machined from billet 6061-T6 aluminium and anodised black for great looks and corrosion resistance.

8AN O-Ring to 6AN8AN O-Ring to 8AN8AN O-Ring to 10AN10AN O-Ring to 10ANCNC machined from billet 6061-T6 aluminium.Available in our standard range of seven anodised colours.

High quality 10AN Tee Fitting- Swivel on run- Swivel on sideBlack anodised.

Stainless steel banjo bolt for use with banjo fittings on clutch and brake lines.Effective length 20mm.Available in the following thread sizes:- M10x1.0- M10x1.25- M10x1.5

Anodised aluminium banjo fitting for use on clutch and brake lines.Size: 3ANHole Size: 10.2mm

Franklin Performance male AN weld-on adaptors.Sizes available:- 3AN- 4AN- 6AN- 8AN- 10AN- 12AN- 16AN- 20ANMaterial options available:- 6061-T6 Aluminium- 304 Stainless Steel- Mild Steel

Billet aluminium oil restrictor designed to fit in the end of a male 3AN or 4AN fitting to restrict oil flow to a turbo or similar application.Available with 0.5mm, 1.0mm, 1.4mm or 2.00mm holeNZ Made CNC Machined quality. It is recommended to check with a turbo manufacturer or other qualified person...