Sinco Customs 1 views ♡

After years of development of our merge collector from extensive dyno time and feedback from the top tuners in the country, we have found the perfect balance of boost control and flow. With minimal back pressure where the manifold meets the turbo, you can be sure that you're getting the best flow po...

After years of development of our merge collector from extensive dyno time and feedback from the top tuners in the country, we have found the perfect balance of boost control and flow. With minimal back pressure where the manifold meets the turbo, you can be sure that you're getting the best flow po...

For the use in fabrication of alloy catch cans, fuel surge tanks & fluid reservoirs. These caps are pressed and the welding face is machined flat. This design of end cap is important when high pressures are being used within the tank. We have a range of aluminium tube available to suit the different size Dome caps - 2mm 5005 Aluminium- 11mm depth & Refunds

Cast elbows are ideal for welding to the compressor cover of your turbo charger, completely eliminating the chance of your silicon joiner splitting or melting from excess heat from your turbo manifold or turbine housing. These 90 degree aluminum cast elbows are weldable so can easily be cut back and...

Please note that the machined side of the flange is intended for welding the collector straight to it. Once welded the un-prepped (opposite) side will need to be decked (linished or machined) to become flat. - CNC Machined- Machine Tapped- Mild Steel- As used on our turbo manifolds so perfect fitmen...

If you are setting up an external wastegate return pipe back into your exhaust then a exhaust bellow is something you will want to consider using. These are also great for exhaust systems where length is an issue. These stainless steel exhaust bellows help with alignment of vbands or flanges by givi...

Our range of steampipe bends and straight are sandblasted to a raw finish so you can weld them straight out of the box. From manufactures generally the steampipe elbows will have a black or clear paint on them to ensure they will not rust over time when stored, the fumes this paint creates when weld...

Our range of steampipe bends and straight are sandblasted to a raw finish so you can weld them straight out of the box. From manufactures generally the steampipe elbows will have a black or clear paint on them to ensure they will not rust over time when stored, the fumes this paint creates when weld...

Our range of steampipe bends and straight are sandblasted to a raw finish so you can weld them straight out of the box. From manufactures generally the steampipe elbows will have a black or clear paint on them to ensure they will not rust over time when stored, the fumes this paint creates when weld...

All manifold build kits are made to order - This means there will be a 7 working day wait to be manufactured This kit includes all the main parts to build a turbo manifold, All the components are surfaced prepped ready to weld out of the box. Elbows, pipe and collector are sand blasted and the flang...

All manifold build kits are made to order - This means there will be a 7 working day wait to be manufacturedThis kit includes all the main parts to build a turbo manifold, All the components are surfaced prepped ready to weld out of the box. Elbows, pipe and collector are sand blasted and the flange...

Our range of steampipe bends and straight are sandblasted to a raw finish so you can weld them straight out of the box. From manufactures generally the steampipe elbows will have a black or clear paint on them to ensure they will not rust over time when stored, the fumes this paint creates when weld...

Our stainless steel exhaust tube is ideal for manufacturing exhaust systems, intake snorkels or external waste-gate pipes. This stainless steel tube can also be used for inter-cooler piping. For Hints & Tips on Exhaust Fabrication : - 304 Stainless Steel- 1.6mm Thick- Brushed FinishPLEASE NOTE: WE CAN ONLY COURIER 2 METRE MAX LENGTH

These stainless steel exhaust bends are perfect for manufacturing exhaust systems and waste-gate pipes. This range of 304 stainless steel exhaust tube bends have no distortion when cut and will stay perfectly round for an accurate fitment when attaching to round tube.For Hints & Tips on Exhaust Fabr...

These do not blank a waste-gate port v-band. Will not work with 40,45,50 or 60mm waste-gate flanges These are to suit our universal v band flanges only, they are to be used when blanking the v band if setting up a re-movable re-circ setup for your waste-gate pipe, they need to be bolted up to the fe...

This wastegate piping kit contains all the main components to re-circulate your waste-gate pipe back into your exhaust system.Please NoteIf you are needing to setup your waste-gate piping with a removable section for a screamer pipe aswell then our other listing has the correct amount of vbands with...

This wastegate piping kit contains all the main components to re-circulate your waste-gate pipe back into your exhaust system.Please NoteIf you are needing to setup your waste-gate piping with a removable section for a screamer pipe aswell then our other listing has the correct amount of vbands with...

This wastegate piping kit contains all the main components to re-circulate your waste-gate pipe back into your exhaust, this piping kit will also allow you to make a removable section to vent your waste-gate pipe to atmosphere (in other words make a screamer pipe section).What size to choose for my ...

This wastegate piping kit contains all the main components to re-circulate your waste-gate pipe back into your exhaust, this piping kit will also allow you to make a removable section to vent your waste-gate pipe to atmosphere (in other words make a screamer pipe section).What size to choose for my ...

Our aluminium tube bends are ideal for intercooler piping. These are designed to be cut and welded together to the desired angle - 6061 Aluminium- 1.8mm Thick- 200mm Leg Length- Satin Finish & Refunds

Our aluminium tubes are ideal for intercooler piping, breather tank or fluid reservoir fabrication. The tubes can be used in conjunction with our aluminium dome caps. These aluminium tubes are designed to be cut and welded together with our aluminium mandrel bends which are also a satin finish. - 6061 Aluminium- 1.8mm Thick- 500mm Length- Satin Finish & Refunds

Exhaust Flexi joints are recommended in an exhaust system to help stop the weight and vibration of the exhaust transferring vibration up through your turbo or turbo manifold, this can lead to cracking of your manifold or bolts and studs vibrating loose. There are many different types of an exhaust f...

Our range of mild steel exhaust bends in 180 degree are available in 2" - 2.25" - 2.5" - 3" These mild steel tube bends are designed specifically for exhaust systems, external waste-gate pipes & headersFor hints & tips on exhaust fabrication CLICK HERE: - Mandrel Bent- 1.6mm ThickLeg length of mild ...

Our range of mild steel exhaust tube is designed specifically for exhaust systems, headers & external waste-gate piping. We stock 1.5", 1.75", 2", 2.25", 2.5", 3", 3.5" & 4".The exhaust tube has a coating of oil on the inside and outside to prevent surface rusting before use, it is recommended to re...